With the key in the ON position (engine not running), press the accelerator pedal to the floor three times in rapid succession. You may have to repeat this action.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
service engine light------scan for codes
brake light and antilock brake light ----abs problem scan for codes
change oil light ----- change oil and reset system light
you can disconnect the Battery and when the battery is disconnected ..now turn on your head lites ... Wait a min or two then shut off head lites re connect battery ... try starting car this will reset you computer in car ...
there is no reset for low oil pressure, have this checked by a shop ASAP, if the engine is really getting low oil pressure the result will be a burned out engine very quickly, the other thing that was reset was the "Oil Change" lite whic is rest, please have a shop look at this right away
You need to reset the oil lite with an oil change or add oil. As for the check engine lite being on you need to read the codes and see why it is on then the repair facility will reset the lite. They come on for a reason.
Your "Oil Life Monitor" needs to be reset.
Turn ignition on, engine OFF.
Fully depress and release the accelerator pedal slowly 3 times within 5 seconds.
If CHANGE OIL indicator flashes, the system is resetting.
After indicator stops flashing, turn key off, then start vehicle. If light stays off, you are done. If it comes back on, repeat the entire procedure.
**Note** Oil life monitor should be reset, whenever you change your oil and filter.
Sometimes disconnecting the battery for a few minutes will reset the check engine light. Make sure you have the correct radio code before doing this or your radio will not work after disconnecting the battery.
×