At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 2006 BMW 750li and trying to determine how to remove the electronic gas pedal. It is a "fly by wire" type and was trying to remove. Any assistance would be great.
IF YOU ARE GETTING A THROTTLE PEDAL POSITION SENSOR FAULT CODE.THE THROTTLE POSITION SENSOR IS THE WHOLE THROTTLE BODY UNIT IS THE THROTTLE POSITION SENSOR.THE SENSOR NOT IN GAS PEDAL LIKE VOLKSWAGON. VOLKSWAGON HAS THE ACCELERATOR PEDAL POSITION SENSOR.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
door change doesnt affect the immobilizer ---depending on how hard or the extent of damage sounds like theirs more damage else where to wiring -electronics -components
remove air cleaner with clip,
remove filter
remove allen head bolts on plastic cover.
# all connectors i took off the top first.
then change the bottom 1 at a time..
install the ivm back in place with plastic clip in (push back in place)
common problem is lose drain plug or oil filer cap.Valve cover leak to. raise on lift and clean the engine.start shortly and rechek again.let me know the general location.front back left or right?
There is a allen fill plug on the side of the tran towards the back.the trans temp should be around 50 deg c,with the engine running remove the plug,the fluid should just trickle out of the fill hole.
Changing the headlamps on these year BMW's is not an easy process, the dealer I use has informaed me that the front bumper needs to be removed in order to replace them, I would recommend that you take it to your favorite BMW dealer for repair. Hope this helps, let em know
×