Question about 2007 Toyota FJ Cruiser

2 Answers

Unable to get any of the gears to engage. What

Unable to get any of the gears to engage. What could the problem be?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It could also be that your 4WD is in neutral. Check before anything else.

Posted on May 28, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 14,036 Answers

CHECK TRANSMISSION FLUID.IF LOW YOU HAVE A LEAK.IF FLUID LOOKS BURNT OR SMELLS CHANGE FLUID AND FILTER.CHECK AND ADJUST SHIFT CABLES.LOOK FOR DAMAGED OR DISCONNECTED MANUAL SHIFT CABLE.IF ALL IS GOOD.CHECK TRANSMISSION FUSE.HAVE VECHICLE SCANNED FOR SHIFT SOLENOID AND LINEAR SOLENOID LINE PRESSURE CONTROL CIRCUIT PROBLEMS.ALSO FAULTY PARK NEUTRAL POSITION SWITCH SENSOR.

Posted on May 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is wrong with my 1998 ford courier clutch not engaging?


check for loss of fluid in the clutch system
Yore question contradicts your question
If the clutch is not engaging ( slipping or no drive when in gear) it is the clutch master cylinder that has a blocked compensating port and needs replacing
ON the next statement you say that with the clutch pedal fully depressed you grate the gears and that is the clutch not disengaging
either way you have the answer for what ever it is that you have

Feb 03, 2016 | Ford Cars & Trucks

1 Answer

Gear selection, unable to engage any gear


IF a cable selector check for missing pin or broken cable or loose outer cable. If mechanical selector check for broken arms or rods

PLEASE RATE THIS REPLY FOR ACCURACY

Mar 24, 2013 | Cars & Trucks

1 Answer

Unable to engage gear after depressing brake on oddesy


I agree...

When the brake switch (mounted on your brake pedal) is activated after depressing your pedal, this releases the gear mechanism.

Feb 21, 2013 | Cars & Trucks

1 Answer

I have a Peugot 406 Diesel estate (R), unable to engage any gears and gear lever loose and floppy. Can't drive the car at all. Any suggestions?


Gear Linkage from the gear lever to the gearbox may have come off unless the lever goes directly into the top of the box

Sep 27, 2010 | Peugeot 405 Cars & Trucks

1 Answer

VW GOLF 1.4 1999 S. Gearbox makes whining sound at idle. once clutch is pressed sound goes. car drives fine with no noise in 1st-4th gears. unable to select 5th gear.. just grinds and wont engage. VW Golf...


No good news on this one I think
Your whining sound problem is the Layshaft bearings in the gearbox are badly worn. It also seems that the baulk rings are damaged on 5th gear.
John

Aug 14, 2009 | 1999 Volkswagen Golf

1 Answer

Problem going into gear


Your clutch system works the same as brakes do. The necessity to bleed tells you that there is a malfunction permitting air into the system. Check where the pedal rod goes into the firewall under the dash, the line itself, and the slave unit (some are inside the bellhousing...look for fluid dripping from bottom to verify if leaking) Not unlike brake master, they can also internally bypass. If you find no leaks, change master. Bleed system and you should be fine

Jul 11, 2009 | 1995 Jeep Wrangler

1 Answer

Unable to put back on the gear shift knob on my car after removing it.


year, make and model of the vehicle in question....?¿?¿?

Oct 18, 2008 | 1999 Dodge Intrepid

2 Answers

Cannot engage transmission from first to second gear


Usually this is a linkage problem, and most often the rubber lined coupling between two rods in the linkage system. This fails as the rubber ages, and when it does you are unable to select some or all gears, and might be stuck in one gear!

Not too difficult to re and re, and part is available from Saab dealer at reasonable cost.

Coupling may be located inside the car, under the console, ahead of the gear lever housing, or on the other side of the firewall

Sep 03, 2008 | 1989 Saab 900 4 Door

Not finding what you are looking for?
2007 Toyota FJ Cruiser Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...