Question about 2003 GMC Yukon

1 Answer

Can I install shocks on a yukon 2003,truck my self?.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

You can do anything anyone else can do if you have the proper tools to perform the job.

Posted on May 16, 2010

Testimonial: "thanks again your right about the tools,I"LL get back to let u how I made out thanks"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NEW RARE SHOCK RUBBER BURST


If it was the same shock and you bought it new it should be under warranty. if it was the other side, they both should be replaced at the same time. i guess i am not clear what rubber you talk about, If it is just the boot, they are thin and rip easy. i do not how many miles are on your vehicle so i find it hard to help without knowing where you drive, how you drive, and limited information.

Mar 27, 2014 | 2003 GMC Yukon Denali

1 Answer

How do I fix the self leveling shocks in my olds bravada


it is a air shock ,and check and see the condition of the shocks. you may need to replace all 4 shocks

Jan 27, 2013 | 2003 Oldsmobile Bravada

1 Answer

What to do for 2003 Denali air bag, service ride control light flashing


I replaced my shocks with better quality... And now my Service Ride Control is also on. The mechanic said the truck is looking for the electronic switch on the previous shocks. There is a switch they can install to over ride the warning. Don't know if you had new shocks installed, but thought I would mention it.

Jan 21, 2013 | 2003 GMC Yukon Denali

1 Answer

My 2003 yukon xl has a rear suspension noice every time i go over a bump or so


2003? original shocks,I assume.
Could be a loose shock bolt,loose sway bar bushing or end link bushing
Is the tail pipe touching the frame?
When it cools,wiggle the tail pipe forcefully up and down.
Crawl under there and inspect both rear shock absorber mounts and sway bar bushings and mounting bolts.
if it LOOKS good,have someone bounce the rear of the truck when you are nearby. Hear the noise? left side or right side?

Jan 19, 2013 | GMC Yukon XL Cars & Trucks

1 Answer

Were the air pump for the shocke located on a 2003 yukon denali


Should be located on the outside of the frame rail just below the fuel filler neck.

Sep 23, 2010 | 2005 GMC Yukon Xl Denali

1 Answer

Level ride shocks not working.


have a self test run buy the dealer on the self leveling system, most common causes are the ride height sensor, the air pump is defective or the pump relay is defective.

Mar 06, 2009 | 2003 GMC Yukon Denali

1 Answer

Yukon XL poor suspention


mcdevito75 here, Chances are you still have the original Struts in the vehicle, have new struts installed at all 4 wheels. Shop around for a good price on Struts (shock absorbers)

Feb 24, 2009 | 2003 GMC Yukon XL

3 Answers

2004 yukon xl denali self-leveling rear air shocks


There's a lever that connects the driver-side rear shock to the Automatic Level Control module (the air compressor and the ride-height sensor). Disconnect the lever from the shock and rotate it up and hold it. The compressor should kick in when you hold in place after a few seconds. If it doesn't kick in, make sure your fuses and relays are good. Otherwise, you may have a failed ALC module/burned out air compressor (from the shocks being shot). After you replace the shocks (and after you recouped from the heart attack you had when you shelled out $500+ for each shock), replace the ALC module/compressor (it's all one unit), and test it - it should kick on when you rotate the lever up again.

Figure about $350 for the ALC module from your dealer, and make sure the part numbers match! Your truck came with an upgraded ALC module from the 2001-2004 module, which were prone to water damage.

Good luck!

Aug 28, 2008 | 2005 GMC Yukon Xl Denali

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...