Question about 2006 Fiat 124

Open Question

Fiat Punto 1.2 8V has idle problems, revs high on idle, the mechanic reckons he used another Idle Control Stepping Motor and the ECU still shows a fault!! I have been reliably told that they often misdiagnose this problem please advise. Many thanks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 9 Answers

SOURCE: oil pan replacement on fiat punto

this is not a big job - infact pretty straight forward -word of warning thou do not buy the replacement pan from e-bay - only tip i can give is once removed leave it standing for 24hours so all access oil is drained - makes it easier to fit new one also a cleaner job and less likely to leak - andy

Posted on Mar 13, 2009

  • 11 Answers

SOURCE: ECU reset

normaly the ecu resets when the car is not running and u lock the doors wait 5 mins this normaly resets this

Posted on May 27, 2009

  • 11 Answers

SOURCE: where are the spark plugs located on a fiat punto

they are located at the back ov the engive they have lick black rubber pipes attached to them u have to pull them off then u will see the plugs thare will be 4 in a line u will need a spark plug socket set just turn them they will come out.

Posted on May 27, 2009

  • 89 Answers

SOURCE: can not find reset switch for ecu

there is no reset for an ecu

Posted on Jul 12, 2009

  • 84 Answers

SOURCE: FIAT PUNTO. Ticking for short period following start up

Definitely change your oil every 3 months or 3000 miles. After you change it add a half cup of Lucas engine oil suppliment when the engine is hot.
If if goes away you know it's cam or lifter issue. If it doesn't the ticking you hear may simply be your fuel system.

Posted on Jan 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I adjust idle on 2009 Toyota Corolla 1.8 liter


There are no provisions for adjusting the idle . The computer through the use of the IAC valve - idle air control controls the idle . There is a base idle set at the factory an should not be changed or messed with . What idle problem are you having ? low or high Could be IAC valve or air passages plugged . High idle the throttle plate could be gummed up an sticking ! If you were to change the base idle you cause check engine light problems .
How To Fix Car That Idles Poorly

Apr 20, 2017 | Toyota Cars & Trucks

1 Answer

Replaced f/p could it be mechanical fuel return valve in tank; motor revs up to4000 rpm then cuts


inspect TPS and idle control motor--good idea to clean the throttl body unit ------a scan w factory gear will show whats goin on in the system--a code reader at a partsplace wont--seek a private mechanic who has xperienc in data streams

Dec 07, 2014 | Opel Astra Cars & Trucks

3 Answers

Throttle revving up when idle


fiat punto old one ,check the vacumn pipes for perishing and damage if they all appear ok then remove the idle control valve and clean it all out including the hole it fits into ,it looks like a round black cylinder on the inlet manifold with a 4 wire multiplug connection and when its removed it has like a bulet shape on the end ,make sure the rubber seal on it ok as well

Mar 30, 2014 | 2001 Fiat Punto

1 Answer

Flashing light on my dash of a engine


hi patricia
FIAT engine light flashing means the ECU needs adaptation,
you can do it yourself just follow this procedure.
( remember not to accelerate unles is stated) start the engine
let it to warm and wait for the cooling fan to come ON then OFF 3 times, like ON,OFF,ON,OFF,ON,OFF. After the fan cuts off the third time accelerate fully down let the engine rev up to 4000 only then leave the accelerator let the engine goes down back to idle, do this 3 times.the engine light should go away.
good luck

Feb 08, 2014 | 2001 Fiat Punto

1 Answer

My fiat idles but wont rev


That maybe what the rev limiter is set for.That way you can not over rev causing engine damage.

Sep 11, 2012 | 2001 Fiat Punto

1 Answer

Fiat punto 02 reg 1.2 8v Lumpy on idle and using lots of fuel Fiat punto not listed on the pick option


I'd start with replacing fuel filter and running a good fuel system cleaner through it with next tankfull

Mar 10, 2011 | Fiat 500 Cars & Trucks

2 Answers

Jaguar xj6 4.0 1990. showing fault code fuel 14, fail 14. what does this code mean ?


2 airflow sensor out of operating range 3 coolant temp sensor out of operating range 4 oxy sensor indicates full rich 5 throttle potentiometer/airflow sensor... (low throttle pot signal with high airflow sensor signal) 6 throttle pot/airflow sensor...... (high throttle pot signal with low airflow sensor signal) 7 throttle pot...idle fuel adjustment failure(idle speed??) 8 intake air temp sensor...open or shorted circuit to sensor 11 Throttle pot at idle: Throttle pot idle trim out of normal range 12 Airflow meter: MAF signal out of range 14 Coolant thermistor: Resistance out of range or static during engine warm up 16 Air thermistor: Resistance out of range 17 Throttle pot: Out of range 18 Throttle pot/Airflow: Low throttle pot signal at high airflow 19 Throttle pot/Airflow: High throttle pot signal at low airflow 22 Fuel pump drive: ECU output to fuel pump relay 23 Fuel supply: Engine running too rich 24 Ignition Drive: ECU output to ignition Amp 26 Air leak: Engine running too lean 29 ECU self check 33 Injector Drive: ECU output to injectors 34 Injector: Looks for Injector dribble 37 EGR Drive: ECU output to EGR switching valve 39 EGR check sensor: EGR not working (normally pipe blocked) 44 Lambda (O2) sensor: Poor mixture control rich or weak (or misfire) 46 Idle speed Control valve: ECU output to Coil AB 47 Idle speed Control valve: ECU output to Coil CD 48 Idle Speed Control Valve: Stepper motor grossly out of position 66 Air pump: ECU output to air pump relay 68 Road speed sensor: Seen speed < 5km/h at high engine airflow 69 Drive/Neutral switch: Seen cranking in "D" or high airflow in "N" 89 Purge Valve drive: ECU output to purge valve
this is all I could find

Nov 09, 2009 | 1990 Jaguar XJ6

2 Answers

Fiat Strada


Bad transmission.

Jun 19, 2008 | 2006 Fiat Strada

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,056 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...