Question about 2001 Ford Focus

1 Answer

P0401 trouble code on my 2001 Ford Focus it say say's low air flow in the EGR. How con I find the blockage with out replacing the whole system?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

Check pcv hose from the intake to the pipe under coil. They will collapse and leak. chesk while running

Posted on May 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble code P0401


code p0401 refers to exhaust gas recirculation(EGR) system-insufficient flow detected--- Causes ---hose leak/blockage, basic setting not carried out( if applicable)wiring--EGR valve/solenoid---ECM I would check the EGR valve solenoid first. Replace the faulty units with genuine one because most aftermarket units are not set for OEM cpu units and are not completely
compatible.

May 11, 2013 | 1997 GMC Sonoma

1 Answer

96 cutlass supreme will not pass emission in ut. what should I do? KOER failed, trouble code po401


cleanout egr valve and troutle body . Or replace egr with new one, clean, check vacumm lines , check for clogged check , depending on modle of car you can pippoint problem as some have a common part problem depeding with make of car. But all have to do with exaust system. Insufficient flow exaust flow. Im not an expert, all I know it is related to this, I have it myself so im googling it.

Ford EGR valve

The OBDII fault code P0401 means that the engine computer has detected that the Exhaust Gas Recirculation (EGR) system flow is insufficient. Read more how the EGR system works below. What could cause the code P0401 - clogged or restricted EGR passages
- faulty EGR valve
- EGR valve stuck closed
- problems with the DPFE sensor (Ford)
- problems with hoses to the DPFE sensor (Ford)
- problem with the EGR vacuum switching valve (Toyota)
- clogged catalytic converter
- carboned up EGR temperature sensor
- vacuum supply issues at the vacuum-operated EGR valve
- electrical problems with the EGR valve control circuit
- engine computer problems
helpful website helps you with pinpoint and sou;ution related to auto make and model shows you most common cause of code reading.
www.samarins.com

Apr 16, 2013 | Cars & Trucks

2 Answers

Check engine light code P0401 98 Ford expedition


OBD-II Trouble Code P0401 - Insufficient EGR Flow

EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

A code P0401 most likely means one or more of the following has happened:
The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
There is a blockage in the EGR (tube), most likely carbon buildup
The EGR valve is faulty
The EGR valve may not be opening due to a lack of vaccuum

Check it and keep us updated. Hope this helps (remember to rating this free answer).

Oct 13, 2011 | 1998 Ford Expedition

1 Answer

Ford Explorer : How to Troubleshoot the EGR P0401 Trouble Code


P0401 - Exhaust Gas Recirculation Flow Insufficient Detected

Possible Causes:
- Harness or connectors (EGR volume control valve circuit is open or shorted.)
- EGR volume control valve stuck closed
- EGR volume control solenoid valve
- Dead (Weak) battery
- EGR passage clogged
- Exhaust gas leaks
- Faulty EGR valve

Possible Solutions:
- Clean EGR Valve
- Replace EGR Valve
- Repair EGR harness or connector
- Replace EGR volume control solenoid valve
- Replace EGR volume control valve

Jan 24, 2011 | Ford Explorer Cars & Trucks

2 Answers

Trouble code p0401


P0401 - Insufficient EGR Flow

EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

Symptoms: You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

Causes: A code P0401 most likely means one or more of the following has happened:
* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum

Possible Solutions: In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve


Hope this helps to solve it (remember to rate this answer).

Jan 06, 2011 | Ford F-250 Cars & Trucks

4 Answers

I have four codes. P0136, P0141, P0171, P0401.


p0136 and p0141 are o2 sensors and p0401 is a egr flow and the p0171 means its running lean on low bank 1

Jun 30, 2010 | 1996 Ford Econoline

1 Answer

2001 f 150 code po401


P0401 OBD-II Trouble Code - Insufficient EGR Flow

What does that mean?
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE).

These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

Symptoms
You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

Causes
A code P0401 most likely means one or more of the following has happened:
* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum

Possible Solutions
In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve

Re-Check the possible solutions and tell us news (remember rated this).

Jun 02, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Ford focus with p0401


PO401 is EGR flow insufficent. Replace the EGR valve.

Feb 10, 2009 | 2000 Ford Focus

3 Answers

Code on diagnostics p0401


Code on diagnostics p0401:

What is going on?
Exhaust Gas recirculation low flow detected means that: there is vacuum problem in the EGR system - between the combustion chamber, EGR valve (mechanical - blown up diaphragm or clogged airlets/hoses) , EGR Modulator Valve (mechanical - blown up diaphragm, dirty EG/air filter or clogged airlets/hoses) and Vacuum Switching Valve ((mechanical - blown up diaphragm or clogged airlets/hoses OR electrical - VSV not properly synchronizing with the ECM, for instance).

Effects?
This causes the combustion chamber temperature to increase and produce Oxides of Nitrate (NOx) that is out of an acceptable emission range. This triggers the Malfunction Light (check engine light) to stay on (after a couple of driving cycles)!
Solution: Focus on EGR airways (hoses...) and organs (EGR valve, EGR Modulator, VSV), clean, check or replace the defected one. VSV seems to be criticale as it plays electrical & mechanical function. Once the repair is done, Clear the P0401 code using an OBII scanner.

Dec 21, 2008 | 1996 Lexus LX 450

Not finding what you are looking for?
2001 Ford Focus Logo

Related Topics:

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...