Question about 1985 Chevrolet Camaro

1 Answer

Transmission stuck in 1st gear on a 87 camaro iroc-z

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 975 Answers

If the moudulator (vacuum controlled) is bad it will stay in low,Not sure what tranny,but if it has a vacuum line going to it ,start there,if you pull the vac. line off and fluid drips out ,it's bad.
If a 700r 4 speed ,Pull the cover for the governor (should have a wire clip over it,like a master cyl clip ,kinda) It's just pressed into the housing. A small amount of fluid will leak out. Just grab the governor by the end and pull it out ,The gear on the end is plactic,if it's "applecored" the governor can't work. I've replaced mine a few times.
Oh yea ,check the kickdown cable first,make sure ,if you pull on it ,you can feel the spring pressure aginst it as you get to the end.

Posted on Jan 17, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

87 nissan d21 transmission specs


Hey Anon, You are pretty much stuck with what you have now..the only thing else you could change is the rear gear ratios... Just make sure everything works and let 'er rip.. no need to do anything...

Jun 19, 2017 | 1987 Nissan Pickup

1 Answer

87 IROC WITH A ZZ4 OUT OF A 91 Z28... fitted a


Fuel pressure? Do you hear the fuel pump running? Read the codes to see if ECM is still alive. Do you have spark at the plugs? Remember all motors need 3 things to run air, fuel, and fire at the right time.

Mar 16, 2010 | 1987 Chevrolet Camaro

1 Answer

Camaro `96 3.8 v6 - problem with transmission? OR?


try shifting it manually,if it still doesnt shift through all the gears then someting inside broke loose either torque convertor or the transmission

Sep 05, 2009 | 1996 Chevrolet Camaro

1 Answer

Transmission wont shift to third


If you have lost third you have an internal problem. It will either be the input carrier, third/forth clutches, or a valve body issue. You may price a rebuild job at a trans shop, or a trans from a wrecking yard. 700R4 trans is getting hard to find from wrecking yards. Good Luck

May 19, 2009 | 1984 Chevrolet Camaro

1 Answer

Gear jerking


when it jerks does the check engine light come on? If so find a reputable transmission shop and it is a simple fix. Costed me $88

May 01, 2009 | 1993 Chevrolet Camaro

1 Answer

Gear Jerking in Camaro z28


first of all you need to fix the motor mounts drive shaft hangers and the lower control arm bushings and if you still have a transmission problem . it is in the valve body in the transmission you need to bring it to a good transmission shopas this will be a major tranny overhaul

Apr 21, 2009 | 1993 Chevrolet Camaro

1 Answer

When getting on the gas transmission dogs and bumps 87 camaro 2.8


Check your transmission fluid, sound like it may low !

Mar 24, 2009 | 1987 Chevrolet Camaro

1 Answer

No reverse or 3rd gear (OD) auto trans


check that the throttle cable to the transmission is on it might possibly be that you don't have the cable adjusted correctly

Nov 25, 2008 | 1986 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...