Question about 2005 Lincoln Town Car

Open Question

Cruise control not working

Cruise control works intermittentently

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Cruise control does not work

On my 05 Wrangler Unlt'd Ruby - The vacuum hose on the drivers side of engine had come off, which disengaged my Cruise and the actuator which determines whether my heater points to the vent, Defrost or feet. Put it back on and secure with a cable tie.

If it is like mine, you will then have idling problems, especially when coming to a stop. You will need to clean the throttle body because the engine has picked up **** through the open port while it was off. Directions for that exist on this site elsewhere.

All of these are easy - i hadn't worked on a car in >25 years and it took me 30 min.

Posted on Sep 16, 2008

  • 1 Answer

SOURCE: cruise control stopped working in my 2004 Hyundai Sonata

I was having the same issue with my recently purchased 2004 Hyundai Santa Fe...Check your taillights/brake lights. Turns out, they are tied into the cruise control system and if one is out, the cruise control stops working. When I bought the vehicle, I knew the taillight was out, but did not know the cruise control was out. I still would not know they were tied together (and that I had unknowingly repaired the cruise control) if not for a post found here:

http://www.2carpros.com/forum/2004-hyundai-santa-fe-cruise-control-vt200265.html

hope this helps :) and happy motoring!!!

Posted on Nov 29, 2008

  • 1 Answer

SOURCE: steering wheel controls

Replace the clock spring, or check all the cabling and plugs first. If you are inexperienced take it to an auto electrician, otherwise do it yourself but disconnect the negative battery terminal for 2 minutes prior to opening the steering wheel to check the plugs, as not doing so could cause the airbag to go off. In addition you can also take out the airbag fuse. Check radio control plugs and close it up again and reconnect everything in reverse order. If that doesn't fix it, then have the clock spring replaced professionally, its too much mucking around if you don't know what you're doing.

Posted on Dec 03, 2008

csmock132
  • 4669 Answers

SOURCE: horn,airbag light,cruise control

Sounds like a bad clockspring

Posted on Feb 27, 2009

  • 74 Answers

SOURCE: 2003 jeep grand cherokee cruise control not working.

it must be the part on the transmisiont that either went bad or the connections are bad

Posted on Jun 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

TROUBLESHOOTING WHY YOUR CRUISE CONTROL DOESN'T WORK


There are many things that can cause your cruise control to act up or not work at all. This article will lead you in the correct direction on finding a solution to your problem. This article is for any type of vehicle.<br /> <br /> <b>If your cruise control won't hold proper speed, </b>you need to look at the following parts. <br /> <ol> <li>Faulty Cruise Control</li> <li>Faulty Speed Sensor</li> <li>Faulty Vacuum or Vent Valve</li> <li>Faulty Stepper Motor</li> <li>Faulty Transducer</li> <li>Incorrect Cable Adjustment</li> <li>A Binding Throttle Linkage</li> <li>Leaking Vacuum Tank</li> <li>Leaking Vacuum servo diagram</li></ol> <b>If your cruise control surges, </b>check the following parts.<br /> <ol> <li>Faulty Cruise Control Module</li> <li>Faulty Speed Sensor</li> <li>Binding Throttle Linkage</li> <li>Kinked Speedometer Cable</li></ol> <b>If your cruise control cuts out on you, </b>check the following parts.<br /> <ol> <li>Faulty Transducer</li> <li>Faulty Cruise Control Module</li> <li>Short or Open Circuit in Cruise Control</li> <li>Brake or Clutch Switch Adjusted too tight</li></ol> <b>If your cruise control doesn't work at all, </b>check these parts.<br /> <ol> <li>Faulty Cruise Control Module</li> <li>Short or Open Circuit in Cruise Control</li> <li>Faulty Clutch or Brake Switch</li> <li>Leaking Vacuum Circuit</li> <li>Faulty Stepper Motor</li> <li>Faulty Speed Sensor</li> <li>Faulty Transducer</li> <li>Faulty Cruise Control Switch</li> <li>A Blown Fuse</li></ol>

on Jul 20, 2011 | Ford F-150 Cars & Trucks

1 Answer

Cruise control not working


cruise controls are dependent on the following sensors all working together
brake sensor
clutch sensor
auto--vehicle speed sensor
rpm's sensor
fuse for the cruise control
cruise control switch either or all not working will stop the cruise control from engaging
road speed at which you can engage the cruise control has to be above a reset speed before it will cut in and work

Sep 05, 2015 | 2009 Chevrolet Chevrolet Equinox LS

1 Answer

What causes my cruise controll to not work intermittenly


cruise control starts working above 50kmh, so if your under that it wont work. the cruise servo may be at fault, or I have seen battery acid leak down on the vacuum lines causing cruise not to work correctly. cruise control works off of a vacuum so without it, it wont work. if the cruise light doesn't turn on when pressing the set/cruise button intermitantly it may be the switch itself that is starting to fail

Apr 24, 2014 | 2004 Chevrolet TrailBlazer

3 Answers

Crusie control does not work on 2011 gmc sierra 1500 and I've already replaced the switch?


If the switch is replaced,then it can be wiring issue or faulty cruise control board.But as the switch is replaced,get the voltage at the switch tested to confirm the switch is actually receiving voltage.If no voltage received at switch power supply wire then ,apply external 12 volt power to the cruise control switch wire and then see if cruise control comes ON.If yes,then you know wiring is issue.
=============

On this case, to troubleshoot this problem, there are solved help links. Click the link directly and refer the details to solve this problem yourself, with help of diagrams: ------

Ford ranger cruise control not working? http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html

-----------

Horn and Cruise control quit working?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html

--------

Horn and cruise control not working on Plymouth Grand Voyager?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html

------------------

Horn and Cruise control quit working on 2003 Jaguar S-Type?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html

-------------

Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500

http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------

Cruise control stop working on 1994 Ford ranger?

http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html

----------

Cruise control not working?

http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html

--------------

1996 Ford Explorer: Cruise Control Wiring Diagram?

http://schematicsdiagram.blogspot.in/2012/06/1996-ford-explorer-cruise-control.html

----------

These will help.

Thanks.

Nov 28, 2012 | GMC Cars & Trucks

2 Answers

Cruise control not working


On these case,to troubleshoot these problem,there are solved help links.Click the link directly and refer the details to solve these problem yourself,with help of diagrams:------
Ford ranger cruise control not working?


http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html

----------- Horn and Cruise control quit working?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html

--------

Horn and cruise control not working on Plymouth Grand Voyager?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html

------------------
Horn and Cruise control quit working on 2003 Jaguar S-Type? http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html

-------------
Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500 http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------
Cruise control stop working on 1994 Ford ranger? http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html

----------
Cruise control not working? http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html

--------------
1996 Ford Explorer: Cruise Control Wiring Diagram?


http://schematicsdiagram.blogspot.in/2012/06/1996-ford-explorer-cruise-control.html
----------
These will help.
Thanks.

Nov 22, 2012 | 2003 Ford Expedition

2 Answers

How to fix cruise control


Cruise controls can cease to engage if the clutch or brake light cruise switch are out of adjustment. If this happens, try placing you foot under the clutch pedal (if equipped) and lift up on it (toward you) and hold it while engaging the cruise. If it now works, it will likely cut out when you remove your foot from under the pedal. Check the brake pedal in an identical fashion. Adjusting the switch at the pedals can often solve he problem. Some vehicles (Honda, Acura, Ford, to name a few) have a plastic insert that mounts in the pedal arm which presses against the switch. These can become brittle and fracture into pieces. My Acura has little pieces of blue plastic on the floorboard around the brake pedal one afternoon and I noticed the cruise didn't work. It was the pieces of the insert that had come to pieces preventing the cruise from coming on. I replaced the insert and no more problem with the cruise.

Mar 10, 2012 | 2003 GMC Sierra 2500HD

1 Answer

Cruise control don't work


To troubleshoot your problem,there are few help links,provided below.Click the link directly and follow the procedure to confirm the fault.So as per that you can continue further in repairing this issue of cruise control not working.
The direct help links are as follows :-----cruise control not working?


http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html
-----------Horn and Cruise control quit working?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html

--------------
Horn and cruise control not working on car?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html

------------
Horn and Cruise control quit working suddenly?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html

----------

Cruise control stop working ? http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html

---------

ford ranger cruise control not working? http://technoanswers.blogspot.in/2012/02/2005-ford-ranger-cruise-control-not.html

-------------

My Cruise control not working? http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html

----------

This troubleshooting help links will help you to confirm the problem.

Thanks.

Feb 13, 2012 | Chevrolet 3500 Cars & Trucks

1 Answer

Cruise control no longer works. Cruise light comes


Make sure the cable from the cruise control motor to throtle is not broken or unattached.

Jul 08, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
2005 Lincoln Town Car Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

fordexpert

Level 3 Expert

5481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...