Question about 1993 Nissan Altima

2 Answers

Had a flat tire on my GMC Sonoma. Changed the

Had a flat tire on my GMC Sonoma, left rear. Changed the flat then took it to a shop to repair tire. Got it back and notice the left rear tire wobbling. Took it back and had the balance checked and a new tire put on, still got the wobble. What do I need to check next and how?

Posted by on

  • Zaraki May 16, 2010

    It sounds like the rim might be bent, you can check it if you have a spare tire and change it with the tire in question and then drive the vehicle. Does the vehicle still have a wobble?

  • rth2967342 May 16, 2010

    Checked tire and rim, not out of balance or bent.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 22,219 Answers

Wheel rim damaged ?? locating pin for wheel not lined up

Posted on May 16, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Nissan Master
  • 1,619 Answers

Move tire to front to see if the rim is bent. If it is it will need repaired or replaced. If its the tire you will need to replace the tire.

Posted on May 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need transmission, center console, and floor mats for 2001 Sonoma SLS...


is this an extended cab ,4wd,automatic or manual transmission ,,studdering can be anything from needing a tune up --tires balanced -motor mount-suspension- c/v axle --u-joints torque converter-rear -transmission clutch-4wd components etc

Oct 24, 2016 | 2001 GMC Sonoma

1 Answer

2.8l. How do I disassemble the fuse panel?


GMC Sonoma Maintenance & Repair Questions - CarGurus

www.cargurus.com > Questions > GMC > Sonoma

CarGurusGet fast answers to your GMC Sonoma Maintenance & Repair questions from experts in the CarGurus ... My 1999 Gmc Sonoma 4.3 Will Start But Will Stay Running ...1991 gmc sonoma 2.8 l v6 changed everything in the fuel and ignition system except for the ... Why Is The Engien Dying When The Ecm-batt Fuse Burns Out?

can you bypass the fuel pump relay on a 1997 gmc sonoma

www.cargurus.com > Questions > GMC > Sonoma

CarGurusAug 7, 2014 - can you bypass the fuel pump relay on a 1997 gmc sonoma - I have no power at the pump. can i run a new positive lead from the fuse box straight to the pump... ... Question type: Maintenance & Repair ... 1991 gmc sonoma 2.8 l v6 changed everything in the fuel and ignition system except for the spark ...

GMC Sonoma Questions - wiring diagram for a 1995 gmc ...

images for 1991 chevy s10 wiring

Dec 12, 2015 | 1991 GMC Sonoma

2 Answers

Road noiseSounds like unbalanced wheel


If it is unbalanced, it should vibrate on the steering wheel. you should rewrite your problem and include car type, speed that it happens. Also take off any hubcaps and rotate tires front to rear and see if it changes.

Dec 19, 2013 | Cars & Trucks

1 Answer

Uneven wear on my brakes . the rear brakes are wering unevenly


check to see if the rear end needs to be changed, this could be due to the cv axle or even alignment on the tires. and possibly your shocks so get those checked

Feb 20, 2013 | 2003 GMC Sonoma Extended Cab

1 Answer

I have 1996 Sonoma. My rear signals both flash, the tailights do not work, the liscence plate lights flash with the signal lights, Headlights come on with the ignition. I have changed the relays in the...


check the ground wire behind the dirveside back tire under the fender near the bumper it may be loose i had the same problem and had to reground it just with a nut and bolt to my frame

Oct 20, 2011 | 1996 GMC Sonoma

2 Answers

What's the radeo color code for 2002 GMC sonoma


have to get code from dealer for security purposes he gonna ask you the radio serial numbers or the vin number

Feb 13, 2011 | 2001 GMC Sonoma Extended Cab

1 Answer

My 2002 gmc sonoma (extended cab sls) will not start i have changed plugs and wires fuel pump and fuel filter i have done oil change and air filter change. the truck will fire if i give it a spray off...


My engine light in my 2002 GMC Sonoma has been on for the past four weeks. Yesterday I had an oil change done on my truck with a local mechanic. He turned the engine light off, but it came on soon after leaving his shop.
This morning I went to start my truck and there was NO power whatsoever. After repeatedly turning the key, I soon saw a slight movement on the battery display, but no lights would come on. It just seemed like it wasn't getting any power. I changed the battery two years ago, so it should be fine.
Eventually, the truck received full power and started, more less out of no where. It wouldn't hold an idle and would just die if i took my foot off the gas.
Hopefully someone has a solution for me.
Thanks.

Jan 03, 2011 | 2002 GMC Sonoma Extended Cab

1 Answer

Need to know proper tire pressure on 2003 sonoma


There is a sticker on the drivers door by the striker, if not the recommended from the factory is 32PSI. The other place you can go by is the tire it self, there along the tire by the rim is the information to the max inflation in fine prints. I personal go by the recommended tire pressure on the tire, since the tire brands may have been replaced by another brand then what came with the truck. If you find the Sonoma to ride a bit to hard for you, just let some air out of the tire but no more then 6psi posted on the tire it self. Good luck and hope this helps, Note it's common to run the rear tires a little less then the front since the engine is in the front but if your going to carry a heavy load, make sure all the tires are at the proper inflation.

Oct 30, 2009 | 2003 GMC Sonoma Extended Cab

1 Answer

1998 GMC Sonoma threw code P1133 02S 1/1


P1133 - Heated Oxygen Sensor (HO2S) Insufficient Switching Bank 1 Sensor 1
I would have the repair shop see if they either damaged or left disconnected the oxygen sensor for engine cylinder bank one upstream sensor, this sensor would have been disconnected if the oil pan was removed.

Apr 20, 2009 | 1998 GMC Sonoma

Not finding what you are looking for?
1993 Nissan Altima Logo

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...