Question about 2001 Hyundai Santa Fe

Open Question

What is an indicator

Why the parking indicator is always glowing

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No tail lights on a 99 jeep grand Cherokee


there are many running lamps. best name is park
some go front, some go tail, some go side, and some go
to dash. largest run of 1 circuit on car.... park.
then HL switch, 1 click, does dash glow.?
does all side lamps glow, and front and rear.?
check fuses first. as that is always first.
some jeeps have a relay called , PARK.
license plate rear lamp out too>????????????
fuse 6 in JB , junction fuse box is park
as is park relay
the BCM computer, sees you turn the park switch
the BCM the (the brain inside) energizes the PARK relay
and if the fuse is good , all parks glow.
including the lic, plate lamps.

what we do is check battery voltage first.
12.6vd is good, less is bad. i do this with parks on, and key on pocket as parks work all the time.
then check fuse 6
then last scan the PCM
if the PCM reports BCM errors, for park. we'd not IGNORE THAT.
did you?

Dec 21, 2015 | Jeep Cars & Trucks

1 Answer

Parking and tail light on rear does not work


check the fuse yet?
are the dash park lamps dead too.
radio glows
cluster glows head lights in park.
park relay bad.
if all that good, we need to use a voltmeter.
got one, for 10 bucks. at walfart?

Feb 28, 2015 | 2005 Jeep Grand Cherokee

1 Answer

No tail lights


no (park -tail-running lights) is dash parking lamps glowing?
check the tail fuse yet?
94 accord
this circuit is huge, park/tail, up to 20 lamps. are all dead>?
front park, side park, tail park and dash lamps all out.
this i the red-blk feed. all comments , USA, as lighting varies by country. (laws)
license plate light dead too????????? that too is park
there is NO RELAY.
the fuse 32 feeds the HL (head light) switch and in PARK posistion
it feeds 12vdc raw power to all 38 lamps. (side corning lamps,etc)
the license plate lamp is key, there are 2 lamps.
and both probably are not out.
so if they are good lamps and both tail lamps are good and fuse
then they must glow, if one lamp shorts as 1156 or the like love to do
then it blows the fuse. as does the trailer jack (option) .

so fuse 32 park/tail blown
or HL park switch bad, if all 20 odd lamps dead. and fuse holds.
that simple, and this cars wiring is very simple and nice.

Feb 26, 2014 | 1994 Honda Accord

1 Answer

Car stuck in drive wont let me turn it off so i took the batter cable off


please elaborate this.
the engine wont shut down, at key off>
the tranny A/T will not stick in drive. how can it do that?
are you saying the A/T transmission shift lever is stuck in
PRNDL. lever.
in D, L or 2 or 1? stuck, means you can move the the lever.
and all cars shift to Neural at any time. from any gear.
(cables seizures , excepted)

my wild guess, is the dash lamps (cluster) glows, key out?
tell all things that glow, key out (skip Headlamps and parking lamps
as the always glow key off, if active)

Feb 14, 2014 | 1991 Honda Accord

1 Answer

2010 honda pilot tail lights and license plate light not working


park (tail, running) lights
there are 20 lamps in side and outside, are all 20 dead>
those lamps that glow HL switch 1st click is PARK
side lamps. dash lamps glow in park are they?
this answer , solves the who is bad.

as always, check all fuses first in both boxes
there may be a park relay./
alldata.com has the full schematic, if really curious. ...

Jan 10, 2014 | 2004 Honda Civic

1 Answer

Having cold start problems 2006 h.d. f350 ,truck is parked in heated garage all night,starts normal in the a.m.,sits outside all day at work,soon as temp falls below 30 F it starts then stalls immediately...


glow pug indicator and glow plug themself are 2 seperate system
test for power at the glow plug harness conector 1 each side over valve cover
test light clamp on batery neg test each wire going to relay for power on both side
then quick check on glow plug end test light clamp on positive test all wires
going to glow pug on each side f this does ligtht up the test light system should be o.k.
for the FICM i have used a hair blower on hi to warm the surface of if to start up a few of
these motors to get them back to the yard for replacment afterward
run a ffeet of these from 250 to 550 lots of problem and work 26 units
good luck

Feb 25, 2011 | 2006 Ford F 350 Super Duty

1 Answer

Car wont start diesel engine Could it be the 'glow plug'? what is a glow plug? how can i test?


A glow plug is a small heating element in the cylinder. It heats the diesel so that starting can be made easy. Is your car standing in the open frozen parking If yes, then it would require a lot of battery power to first heat all the cylinders and then turn the engine to start. What we do in such conditions is to light up some fire under the car and heat the fuel system enough for the diesel to warm up a little and thus save the battery for glow plugs. Generally, all vehicles have an indicator light which comes on when the glow plugs are ready for starting. The diesel will ignite on compression, but it has to reach the cylinder and thus has to be flowing. In cold it freezes and hence the need for glow plugs and the heat. If it is parked in heated parking then the need for glow plugs decreases.

Jan 01, 2010 | 1991 Peugeot 405

1 Answer

Parking break lights indication


check the level of the brake fluid in the master cylinder

Aug 19, 2008 | 2003 Mazda MPV

Not finding what you are looking for?
2001 Hyundai Santa Fe Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...