Question about 1997 Dodge Ram

Open Question

Programming my key fob for my 1997 dodge ram pickup truck

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
warlock61
  • 659 Answers

SOURCE: How do I program the keyless fob for my 1997 F250 pickup truck?

cycle the key on and off I can't remember if its 6 or 8 times. the locks should cycle up and down then press any button on the fob the locks should cycle again then turn off key

Posted on Dec 24, 2008

Ad

SOURCE: fuse blows on wiper when i start my 1999 dodge ram pickup

Hi my name is Allen!

When the fuse for the wipers keeps blowing, that means either the motor has a dead short within it and must be replaced, or the wiring going to the motor is damaged and shorting out on the vehicle body somewhere and must be repaired.

Here is how you check it; replace the blown fuse, unplug the connector from the wiper motor, then turn the key on if the fuse does not blow then you need to check the wiring to the motor if the wiring is not damaged anywhere replace the wiper motor.

For further assistance contact me at FixYa!

Posted on Dec 28, 2008

  • 26 Answers

SOURCE: fob will not unlock/lock doors 2007 dodge ram,

fob broken or bad, or fob battery bad, key problem not reading key code

Posted on Jan 14, 2009

chryslertech
  • 115 Answers

SOURCE: program second key fob

Your key can only be programed at the dealer. They have to use a scan tool and a unique id code that they get from the factory. It is done this way to help insure that the vehicle is less likely to be stolden.

Posted on May 25, 2009

  • 67 Answers

SOURCE: 99 dodge Durango security bypass key fob broke

Try unlocking the the door with the key and then lock and then unlock again the may disable the security system

Posted on Jan 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Went to use the key fob for a 2013 dodge ram today. Truck would not recognize it.


changing batteries is never a bad idea and it only take a minute or 2 to reprogram you fob remeber you can only have 2 program at a time so if there are 3 one will not work

May 02, 2017 | Dodge Cars & Trucks

1 Answer

Key is stuck in ignition receiving no electricity


You are not the only one:

Key stuck in ignition, wont start, dodge ram pickup - Fixya

www.fixya.com/.../t14560159-key_stuck_in_ignition_wont_start_dodge
Oct 6, 2012 - key stuck in ignition, wont start, dodge ram pickup - Dodge Ram 1500question. ... 631 Answers. SOURCE: 1999 Dodge Ram 1500 Pickup error code p0171. This code means ... Jun 28, 2011 ' 1987 Dodge Ram 50 ยท 1 Answer .

Aug 23, 2015 | 2011 Dodge Ram Pickup 1500

1 Answer

Where is the valet switch for a 2004 dodge ram 1500


valet switch?????????????????

When the anti theft system was created,the dealers forgot to tell the new car buyers about how much the fob matters to the vehicle,without it,owners are stuck,your anti theft device is activated,you need to lock and unlock your doors a couple times with the key fob,not the key,and then you need to put the key in the ignition and start it,if you dont have your key fob,call your car dealer to get a new one,they are programmed for each car only,you cannot bypass it.if you lost your fob or never had it,whatever,you need to have the exact fob that came with that car from the factory,the key and fob have a chip in them that only go to that certain car,if you do not have it,then you need to buy a new one from the dealer or ebay and then you need to contact your dealer about programming the fob to your car,you might not have to have it towed if they have the documents from the car,the only other way is to get a junk car,with the steering column,key,fob and all computer boxes and door locks and switch them,i just did that with a 98 dodge dakota,and it works.

Mar 29, 2015 | 2004 Dodge Ram 1500

1 Answer

Key not detected ram 2014 pickup if the alarm works


Make sure that your cellphone is not too close to your key fob.

Reset the computer by getting out of the truck & shutting the door; get back in, & try starting it.

Nov 29, 2014 | Dodge Ram Pickup 2500 Cars & Trucks

1 Answer

My 2001 dodge ram key fob was stolen. can i reprogram?


Try this....
ATTENTION: You MUST HAVE one working remote to add one more to the system. If you do not have one working remote right now then these instructions will not work. You will have to have a Locksmith or dealership use a computer to program the first remote for you.


1. Turn ignition to run position (as far as you can go without starting engine).
2. Using any Working remote, press the UNLOCK button for 4 to 10 seconds.
3. Within the specified 4 to 10 seconds, continue pressing the UNLOCK buton and press
the PANIC button for 1 second and release both buttons at the same time. A chime will
sound within 3 seconds to indicate that the vehicle has entered remote programming
mode.
4. Within 30 seconds of the chime, press any button on all remotes to be programmed
including previously programmed remotes. A chime will sound after each remote is
programmed.
5. Turn ignition to OFF and remove key.
6. Test all remotes.

Jan 06, 2014 | 2009 Dodge Ram 2500

1 Answer

2001 dodge ram, key fob batterys are good and the inside looks good but not able to use it to unlock or lock doors and use the panic


Th fob may need to be re-programmed. It's different for all cars, but it should have it in your manual. Do you have only 1 fob? If not, does the other work? My best suggestion is to buy another fob from ebay, which is where I pick mine up all the time. These will need programmed, but a little looking on the internet will give you directions on how to program the fob, or the seller could give you instructions.

Sep 27, 2010 | Dodge Pickup Cars & Trucks

1 Answer

Fob will not unlock/lock doors 2007 dodge ram,


fob broken or bad, or fob battery bad, key problem not reading key code

Jan 14, 2009 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

How do I program the keyless fob for my 1997 F250 pickup truck?


cycle the key on and off I can't remember if its 6 or 8 times. the locks should cycle up and down then press any button on the fob the locks should cycle again then turn off key

Dec 23, 2008 | 1997 Ford F250 SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...