Question about 2004 Cadillac Deville
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need to replace the regulator. When cable comes off track it usually binds up in the motor. motor, and cable all come preassembled as one unit, known as the regulator.
Posted on May 21, 2009
SOURCE: rear passenger window off track
You have to carefully remove the panel. They are all "snapped" into place. If you have not done this before, it's hard to describe. You may have to remove a lever, I have never done the back panels, just the front ones, but it was not too bad. Use a medium sized screw drive and take your time.
Odds are there is a green / yellow plastic part that has failed. This usually happens on the front ones, but I guess it could on the back ones. This plastic part fails that holds the window in the runners.
Once the panel is off this is easy to fix. You will have to get the part at a dealer and the put back on. There is a metal retaining pin you will have to deal with.
When testing, please be very careful putting the window all the way up. It is amazing how easy it is to break a window if it is not lined up correctly. My friend broke two trying to fix one of his cars (not a Saab).
I have had to fix a front in my wife's 2001 replacing the plastic part.
This is a known issue
Posted on May 24, 2009
SOURCE: window wont roll up
Hi my name is Allen!
When the window falls down it is because the cable for the regulator and motor broke. The only fix is a new regulator/motor assembly from the dealership, or a good one from the junk yard if you can find one.
For further asistance you may reach me at FixYa!
Posted on Dec 28, 2008
if the window is off track the regulator is probably bad. to remove the door panel should be a couple of screws by the inside pull handle and possibly one by the door handle itself also check the bottom of the door for any then just pull it off and lift up to clear latches and remove plastic film to get to inside of the door
Posted on Aug 31, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can access the window and the track. You may need to purchase some new replacement clips that secure the window onto the track.
Posted on Oct 28, 2009
Tips for a great answer:
Dec 01, 2011 | Jeep Grand Cherokee Cars & Trucks
Jun 18, 2010 | 2007 Dodge Nitro R/T New Cars
Jun 03, 2010 | 1997 Mercedes-Benz E-Class
May 12, 2010 | 1998 Ford Expedition
Jul 03, 2009 | 1989 Chevrolet S-10 Blazer
May 20, 2009 | 2001 Chevrolet Suburban
Apr 22, 2009 | 2006 Saturn ION
Apr 18, 2009 | 2001 Hyundai Sonata
Apr 11, 2009 | 2002 Chevrolet Tahoe
Dec 17, 2008 | 1999 Jeep Grand Cherokee
335 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: