Question about 2007 Ford Focus (3 Door) Hatchback
Self levers have a switch on the suspension that controls the lights position. i would check this is working first as when they go it can make the lights go up and down all the time.
Posted on Jul 08, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Headlight Issue
You can replace the bulbs wihout removing anything. The passenger side is super easy. The driver side is tougher because there isn't much room to stuff your hands, but it can be done. If you must pull the battery, make sure you have your radio security code on hand because you will need it after hooking the battery back up. I'd suggest not removing the battery and just taking your time to get the driver side bulb replaced.
Posted on Apr 14, 2009
Just in case you haven't fixed this or bought bulbs yet, the grand am requires a 9007 headlight bulb, it is dual filament. (meaning it is both the low beam and high beam) Basic sylvanias at an autozone/schucks/etc. should go for $30, I would recommend sylvania silverstars ($40) or silverstar ultras ($50) depending on what weather conditions you normally drive in. No matter what, never touch the bulb itself as this could cause premature failure (oils from your skin can cause part of the bulb to get hotter, then ka-boom and a big mess.) so make sure you only carry the light by the socket/base.
You will need:
Flat-Head Screwdriver (maybe two if you can't fit your finger in to pull up the L-shaped tab)
9007 Dual-Filament Headlight Bulb
(Optional) Grease for the O-ring on the bulb housing (This helps keep the elements out and makes for smoother removal later, but is not needed at all) Ask your local autozone/schucks/etc. staff if they carry this if you would like some.
Replacing the bulb is quite simple, Remove the plastic screws holding the cover that's over the headlights, don't be afraid to give it some elbow grease, use a big flathead screwdriver if needed. (I've found that you can just remove the two farthest screws if just replacing the headlight bulb)
After you have access to the right side of the driver's headlight (or left of the passenger's), look for a L-shaped black metal tab with a hole in the top of it, put the flat head between this tab and the headlight housing so that the notch in the tab is clear of the headlight housing, then pull firmly up on the black metal tab. Be sure to take note of how the tab keeps the white plastic piece in place, it will make reassembly easier.
This will release the outer side of the headlight assembly, from here all I do is rotate the headlight assembly so that the inside corner goes into the car and the outside comes out. This allows easy access to almost (if not all) bulbs in the headlight housing.
Just reverse the process to put the headlight assembly back in, if you are having trouble make sure of four things:
1) That the 2 bolts are lined up with the holes
2) That the plastic adjuster (these are what you can use to modify the headlights angle by the way) on the bottom bolt is aiming up and down so that it sits flush with the housing aroung the hole the bolt is supposed to go into.
3) That the inside corner of the headlight assembly isn't getting snagged on anything.
4) That when you do get the assembly flush with the housing, that the black L-shaped tab is being pushed down on the correct part of the white plastic so it holds the headlight assembly firmly in place.
Headlight Housing - Looks like part of the fram of the car, should not be moveable. You can see up to 3 skinny bolts going through the back of the housing from the headlight assembly
Headlight Assembly - Plasting encasement that the bulbs rest in.
Black L-shaped tab - Has a hook that keeps the tab from moving up accidently
The Cover - It may just be some big black cover that looks nice (or bad depending on how well you have treated your car :D) but is a pain to get under, it is held down by many black plastic screws
Black Plastic Screw - Exactly that....
P.S. While the Headlight Assembly is out, you mind as well take a wash cloth and clean off the bumper where the car washes have not been able to get. (i.e. under and arround the rubber seal)
Posted on Jul 26, 2009
You can remove the inner fender well and gain access to the bulb with a little luck and creativity. Removing the wheel will make this a little easier. Make sure you check the connector as they have issues with them melting.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
Posted on Nov 12, 2010
Go to this FREE Ford website to view or download the owners manual for your vechicle.
On page 113 it shows step by step instructions on how to remove the headlamp.
Posted on Nov 20, 2010
Tips for a great answer:
Jun 12, 2017 | Ford Cars & Trucks
Jul 12, 2012 | Ford Explorer Cars & Trucks
Jul 05, 2012 | Volvo S40 Cars & Trucks
Aug 29, 2011 | 2007 Ford F
Jan 16, 2011 | Ford F Cars & Trucks
Jan 31, 2010 | 2007 Toyota Tundra
Nov 14, 2009 | 2007 Ford F
Oct 16, 2009 | 2007 Ford Fusion I4 SEL Sedan
195 people viewed this question
Usually answered in minutes!