Question about 1992 Chevrolet C1500

1 Answer

No room to remove starter wires on 1992 Chevy V8

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

You maybe able to get to them through the wheel well. Or, unbolt the starter and lower it down, there should be enough wire to lower the starter down. Disconnect the positive battery terminal.

Posted on May 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 V6 Tundra starter obstacles


a V8 tundra starter motor write up
a whole lot has to come off the motor

Some Guy In Nevada

If the starter motor is under the exhaust manifold

best guess the exhaust manifold comes off

try rachet spanner

huge starter motor for a 4 ltr isnt it


26276831-nkdeffdw2hboftuwnedy3prt-1-0.jpg

26276831-nkdeffdw2hboftuwnedy3prt-1-1.jpg

Sep 07, 2016 | 2006 Toyota Tundra

1 Answer

1992 chevy 3500 wont start after replacing starter


You have power on the battery cable terminal, and the purple wire coming from the neutral safety switch ?
Can you jumper the solenoid and make it crank ?

Jul 06, 2013 | 1992 Chevrolet C/K 3500

1 Answer

1992 chevy s10 4.3 wire diagram for distributor


I'm not trying to be an @ss, but neither of these answers are related to what the question was.
he is wanting a wiring diagram for the distributor of a 4,3 V6, NOT A v8 or in inline 4 cylinder.

Apr 22, 2011 | 1992 Chevrolet S-10

2 Answers

How do I take a starter off 1997 chevy blazer?


I had to take motor mount loose on that side & lift motor away from mount to get room to remove starter

Apr 01, 2011 | 1997 Chevrolet Blazer

1 Answer

How do you remove and replace a starter for a 1992 2.6L Isuzu Amigo?


1.The battery negative and more importantly positive cable must be disconnected.
2. There are 2 14mm bolts holding the starter in place, the upper bolt can be removed by leaning over into the engine compartment from under the hood with a socket and extension on a ratchet or a ratcheting wrench.
3. crawl under the front passenger wheel and remove the positive cable nut, remove positive cable from starter.
4. unclip the small ground wire attached to starter.
5. remove the lower starter bolt.
6. There is room on the bottom of the vehicle to wiggle the starter down to the floor and out from under the vehicle. There isn't enough room to get the starter out from the engine compartment up and out from under the hood.
7. installation of new starter is reverse of installation.

This procedure should work on any Isuzu Rodeo, Trooper, Amigo, or Honda Passport with a 2.6L 4 cylinder 4ZE1 engine

Nov 12, 2010 | 1992 Isuzu Amigo

1 Answer

Replacing starter on 1992 gmc sierra 305 v8 motor


disconnect the battery lead from the starter plus other wires,undo the bolts on the starter flange & the starter should pull straight out providing there is nothing else in the way if there is anything it will have to be removed first.......hope this helps......cheers

Jul 29, 2010 | 1992 GMC Sierra K1500

1 Answer

I need to replace the starter on a 1992 Chevrolet Camaro RS with a V8 engine. Can you give me directions?


Remove neg battery cable. Then lift car up. Mark with tape or marker the wires connecting to starter/ solenoid. Then remove the two cables.
Then remove two bolts from starter and drop down or pull up by exhaust manifold if you cannot drop down through bottom.

Go to www.autozone.com and register for full free online repair manual with everything you could ever need for any vehicle

Sep 09, 2009 | 1992 Chevrolet Camaro

1 Answer

I can't get Chevy K1500 starter removed to replace.


Make sure all your wires are off. Push the starter forward, turn it to the right, and pull it down. It will come out. It don't seem like there's room, but there is. Good luck. PHil

Jan 27, 2009 | 1992 Chevrolet K1500

1 Answer

Starter for chevy starcraft van 1992


if you have a small block v8 (most common) the starter will be on the passenger side at the back of the engine where the exhaust pipe comes down from the engine first disconnect the neg cable on the battery. to remove the starter you will have to get under the van,there are two bolts that hold it on the engine (use a 9 socket) remove these two bolts and the starter will drop down,then remove the wires (note the location they came from as aftermarket starters have more terminals than you need) reverse these steps to re-install
this may help as well http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008ee3b
hope this helps!.....thanks for choosing fix ya!

Jan 11, 2009 | 1992 Chevrolet G20

Not finding what you are looking for?
1992 Chevrolet C1500 Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...