Question about 2006 Toyota Corolla

2 Answers

Transmission p2716 pressure control selenoid "d" electrical

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

This has nothing to do with the shift solenoid switch. It is a failure of the ECM computer module. If your car is less than eight years old and less then 80K miles, it is covered by warranty

If not, the part is about $550.

Posted on Aug 24, 2010

  • whoo1 Aug 30, 2010

    toyota is replacing the ECM regardless of mileage. however, I have that same error code even after the replacement. have also had a rebuilt transmission put in. wtf

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have p2716 code ,need to replace pressure control selenoid???? pls. help me?i have a 2006 toyota corolla

Posted on Jul 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p2716 on 2005 corolla and location


P2716 Pressure Control Solenoid 'D' Circuit Malfunction
Possible Causes Setting Conditions
  • Shift solenoid (SLT) connector is damaged (check pins for damage, moisture)
  • Shift solenoid (SLT) control circuit is open or shorted to ground
  • Shift solenoid (SLT) has failed (electrical fault)
  • ECM has failed the solenoid is under/ behind the transmission pan

Dec 16, 2016 | Cars & Trucks

1 Answer

Pressure control solenoid electrical fault


code p2716 refers to transmission fluid pressure (TFP) solenoid D --electrical=== causes wiring---TFP solenoid
check all connections are clean and tight . replace the solenoid.

May 14, 2014 | 2013 Mazda MAZDA6

1 Answer

P2716 code in 2007 Toyota Corolla


P2716 -Pressure Control Solenoid "D" Electrical (Shift
Solenoid Valve SLT)
Trouble Area:
1. Open or short in shift solenoid valve SLT circuit. (repair harness wiring)
2. Shift solenoid valve SLT defective. (replace)
3. ECM defective. (replace with a good known one)

Nov 25, 2013 | 2007 Toyota Corolla S

1 Answer

Pressure Control Solenoid P2716


have the code checked especially if the car is out of warranty. If it is still under warranty take the car to the dealership . The Pressure Control Solenoid determines the quality and accuracy of the shift points and if you let it go the transmission will not shift properly after a period of time. The pressure control solenoid is used by the PCM to raise the mainline hydraulic pressure during high throttle - this increases the holding force on the clutches and bands and prevents slipping. The pressure control solenoid is controlled by pulses from the PCM and this in turn operates the boost valve insde the valve body.

The problem could be either in the PCM or it could be an electrical problem with the solenoid. As suggested it should be diagnosed by a transmission tech. They can check if the PCM is good by looking at the pulses with an oscilloscope at the connector and they should also be able to test the continuity of the solenoid. If the solenoid is faulty the valve body will need to be removed and the solenoid replaced.
good luck

Apr 04, 2010 | 2006 Pontiac Vibe

1 Answer

My car is a 2007 Toyota Corolla LE . I did a diagnostic scan for my car. the code read dtc p2716


P2716 Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT).

There are 3 things it could be.
It could be your ECM, shift solenoid valve SLT, or open or short in the circuit. I would just recommend saving the hassle and taking it to an ASE qualified mechanic.
Here is what is happening...
The linear solenoid valve (SLT) controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and the vehicle speed sensor.

Oct 19, 2009 | 2006 Toyota Matrix

2 Answers

Pressure Control Solenoid D electrical fault (P2716)


There is a Bulletin on this concern, and it is a warrantable condition for 8 years or 80,000 miles so you are still covered by the factory warranty.
The problem is a logic issue in the PCM. The correction is a new PCM with updated software.


Reference bulletin #TC015-07

The contents are below:

TRANSMISSION & CLUTCH
TC015-07 Title:
HARSH SHIFT AND M.I.L. "ON"
DTC P2716 Models:
'05 - '07 Corolla & Matrix (1ZZ-FE) September 20, 2007

Introduction
Some 2005 - 2007 model year Corolla and Matrix vehicles equipped with an automatic transaxle may exhibit a harsh shift condition and a M.l.L. ON" with DTC P2716 stored.
Improvements have been made to the Engine Control Module (ECM) (SAE term:
Powertrain Control Module/PCM) to reduce the possibility of this condition occurring.

Applicable Vehicles
^ 2005 - 2007 model year Corolla and Matrix (2WD) vehicles equipped with the 1ZZ-FE engine.
Warranty Information
Applicable Warranty*:
This repair is covered under the Toyota Federal Emissions Warranty. This warranty is in effect for 96 months or 80,000 miles, whichever occurs first, from the vehicle's in-service date.



** Please be sure to rate me if this free information has been helpful!

Sep 21, 2009 | 2006 Toyota Matrix

1 Answer

2005 Pontiac Vibe having trouble shifting 1st 2nd code P2716 MIL


This is most likely due to a bad solenoid pack in transmission. You could have tranny serviced and see if it helps. Poor fluid condition makes valves stick in those.

Aug 14, 2009 | 2005 Pontiac Vibe

1 Answer

Check engine ligth on P2716 If I don't have warranty what can I do?. Can you still driving with this problem?


P2716 relates to the pressure control solenoid "D" electrical circuit. I think it's with the transmission. I will research it more.

Apr 30, 2009 | 2006 Toyota Corolla

Not finding what you are looking for?
2006 Toyota Corolla Logo

1,086 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...