Question about 1997 Oldsmobile Cutlass Supreme

1 Answer

1997 Cutlass Supreme turn signals arae not working. I have checked the fuses and all is good. The hazards work...please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

The turn signal mulifunction switch failed. You will need to replace it. This is a common failure. Also you have a blinker relay somewhere. Get someone to replace it. I dont know where its located on your model. Do this first.

Posted on May 15, 2010

  • bigin2suite Apr 09, 2011

    I have replaced both the flasher and switch in my moms 94 cutlas supreme the hazards are working but no turn signal. Any suggestions?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you please tell me where is the turn signal flasher on a 1986 oldsmobile cutlass supreme brougham


On 1980 and later models, both the turn signal flasher and the hazard flasher are located at the lower left hand and the upper right hand corners of the fuse block respectively. Remove these by pulling them from their connectors.
The lower dash panel may have to be removed to gain access to the unit.


26295825-zph2pj5z4kfac3kr23sxzldg-4-0.gif

Sep 29, 2016 | 1986 Oldsmobile Cutlass Supreme

1 Answer

How do I remove glove box on 1997 olds cutlass supreme


check the fusebox under your hood for the horn relay,should be a black box close to your battery that has fuses in it

Jan 31, 2013 | 1997 Oldsmobile Cutlass Supreme

1 Answer

1989 cutlass supreme sl turn lights work but dont blink


CHECK THE HAZARD/FLASHER IN THE FUSE BOX CHECK OWNER MANUAL IF YOU HAVE IT

Aug 19, 2012 | 1989 Oldsmobile Cutlass Supreme

1 Answer

1997 olds cutless brake lights will not work. bulbs, fuse and switch are good


Its a faulty turn signal switch.Try this,push down and hold brake pedal while pushing on the hazard switch and if the brake lights come on then replace the signal switch.

Jan 29, 2012 | 1997 Oldsmobile Cutlass Supreme

1 Answer

I have a 1994 cutlass supreme and both the turn signals are flashing when they are engaged. We replaced the turn signal flasher underneath the dash, thinking that it might help and it did not. We also had...


Stop replacing things and turn off your hazard lights. If this doesn't fix you may have to replace your steering column turn signal switch. Youer hazard lights aren't working likely to a blown fuse.

Jun 16, 2011 | Oldsmobile Cutlass Supreme Cars & Trucks

2 Answers

1994 oldsmobile cutlass supreme sl the fuse box for signal lights


the fuse box will be in 1 of 3 places (1)glovebox (2)under dash by drivers foot kick panel or (3) under hood .

Nov 21, 2009 | 1993 Oldsmobile Cutlass Supreme

2 Answers

Turn signals don't work at all


Well if it isnt the fuse or the blinker relays then it is gonna be the multifunctional switch. This controls your headlights, blinkers, hazards, cruise control, and wipers. To find out if this is bad turn the if=gnition on and turn a blinker on then depress your hazard switch, if the start to flash then the switch is bad and needs replaced. About 150 at a parts store. And the blinker relays are located under the drivers side dash. One on either side of the steering column. Look for a little silver round relay that is about 2 inch in diameter...should day 552 on it. The hard to reach one is on the right side of the column and is towards the back tucked in a little.

Oct 30, 2009 | 1997 Oldsmobile Cutlass Supreme

3 Answers

Hazard flashers do not work. Turn signals do. Changed relay. Nothing. Ugh. 1992 oldsmobile cutlass supreme


You changed the hazard flasher or the turn signal flasher? It has two, one for the hazard and one for the turn signals

Aug 31, 2009 | 1992 Oldsmobile Cutlass Supreme

3 Answers

Brake Lights don't work


I have a 1987 Cutlass Supreme and the brake lights wouldn't work. When I moved the tilt steering to a certain position they worked.

May 25, 2009 | 1987 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1997 Oldsmobile Cutlass Supreme Logo

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...