Question about Ford Windstar

1 Answer

ABS light, Brake light, and trac control lights on no brake problems. have to turn off engine and restart to clesr lights 2001 windstar

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 447 Answers

You most likely have a problem with the ABS brake system. First, check your brake fluid level as many vehicles have a fluid level switch that monitors brake fluid level and if the level is low it can turn off the ABS and turn on all those lights.[ABS is part of the Trac control] If that is good then you may have a failing wheel speed sensor, wiring, or a problem with the ABS controller itself which would require having someone connecting to and reading the ABS service codes with a scan tool to identify what the system saw that caused it to turn itself off. Brakes are a very important safety item so you should get it repaired as soon as possible!

Posted on May 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 Sequoia replaced connectors to battery. Now E brake light ABS light Trac Off and VSC Trac light are on. I disconnected ground and let it sit. Had code ran and it said open closed circuit abs?...


More than likley its your VSC computer (VSC Trac, VSC Off, E brake and ABS brake lights all lit). This problem has been sited on other Sequoias that had the TSB brake caliper/rotor upgrade (recall) and that more than likely the VSC software or computer was not updated to meet the demands of the newly installed brake upgrade.

Nov 19, 2013 | Cars & Trucks

1 Answer

I have 1998 ford windstar . abs light stedy on and traction control ligth blinks can someone hlp me


MOST OF THE TIME WHEN ABS LIGHT AND TRAC LIGHT TURNS ON.YOU COULD HAVE A BAD WHEEL SPEED SENSOR.BEST TO TAKE CAR TO DEALERSHIP LET THEM DO CODE SCAN ON ABS BRAKE SYSTEM TO SEE WHAT CAUSING THE ABS AND TRAC LIGHT TO TURN ON.

Jun 06, 2011 | 1998 Ford Windstar

2 Answers

My ABS and check Engine lights are on but nothing appears wrong


it may not APPEAR wrong, but it is. have the computer scanned for trouble codes. they may just overlap onto both problems.

Dec 06, 2010 | 2001 Ford Windstar

1 Answer

My 2002 windstar abs and brake lamp comes on then the turn signal indicator doe not flash when using the turn signals but tyey are workin


abs light ,trac cont light brake light all seems to happen when its damp or wet out now its got a new ghost in it worpping the left front rotor but ware seems to looks to be pretty even

Sep 03, 2010 | 2002 Ford Windstar Cargo

1 Answer

I have a 2001 ford windstar the battery light the


thier is problem with brake switch on master cylendre leaks brake fluid on top a abs madule and short the wires need to change switch, plug ,and abs madule

Oct 31, 2009 | 2001 Ford Windstar

2 Answers

1994 850 wagon trac light and abs light come on while driving


I will bet money that it is the ABS/TRACS module. It is mounted under the master cylinder on the bottom of the ABS unit. These are very, very, very common failures. I have replaced hundreds of them in my career. To answer your other question, the TRACS system uses brakes. For example: in the snow, when the L or R wheel is spinning faster than the opposite, the TRACS will apply brake to the spinning wheel to slow it down to an equal speed. Hope this helps.

Jun 29, 2009 | 1996 Volvo 850

1 Answer

ABS and brake on 2001 Ford Windstar come on randomly


Do you mean the van is actually braking like a Starsky and Hutch move or that the warning lights indicate that they are on? If its lights then you may be low on brake fluid. Maybe a module leak

Jun 24, 2009 | 2001 Ford Windstar

1 Answer

Brake and ABS warning lights on, trac off on.


You may have a bad abs controller. You need to get the code for the abs light from a shop or auto parts store.

Sep 20, 2008 | 2001 Chrysler Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

832 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...