Question about 1996 Chevrolet Caprice Classic

2 Answers

I was jacking up my 1996 Chevy Caprice from the front and I guess I had it in the wrong spot because suddenly all this steam/smoky stuff came out and now its hissing. What did I break?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

SOUND LIKE YOU DAMAGED THE RADIATOR IF ENGINE HOT. IF THE ENGINE WAS COOL YOU HAVE DAMAGED THE AC CONDENSOR ITS IN FRONT OF RADIATOR.YOU HAVE NOTCHES IN FRONT AND BACK ROCKER FLANGE ON SIDES OF THE CAR.YOU NEED CAR JACK THAT COME WITH CAR IN TRUNK.

Posted on May 15, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 3,640 Answers

Check the radiator. maybe you punctured it.

Posted on May 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Steering wheel not centered on my 96 chev caprice classic


This is caused by needing an alignment or worn front end parts. An alignment will correct the steering wheel. It goes out of align, when hitting pot holes, curb ETC, God-Bless!

Oct 10, 2015 | 1996 Chevrolet Caprice Classic

1 Answer

Car stopped and wont turn over


could be you have what is called a dead spot on your starter,only solution would be to have it towed or driven to a repair shop and have them check it but that would be my best guess had it happen to me on a chevy caprice

Jan 29, 2013 | 1992 Oldsmobile Cutlass Supreme

1 Answer

How do I remove the front passenger door panel on a 1996 chevy caprice?


There are either screws holding it on,Or clips that hold it on,,Remove the arm rest first, There should be two screws hold the arm rest on, The rest is pretty bassic to do, Just use common sence end a lot of (Patience

Nov 03, 2012 | 1996 Chevrolet Caprice Classic

1 Answer

My 96 chevy caprice with lt1 wont start turn over


i have a 1996 chevy caprice LT1 that wont start due to hurricane sandy the water line of the car was half of the bottom pully which i think the starter got wet when i returned back to the car i turned the key it didnt turn over but i had power is there any solutions please help

Apr 28, 2012 | 1996 Chevrolet Caprice

1 Answer

Where is crank position sensor on 1996 chevy caprice


HI, this sensor will be located Under your hood, center, front engine area, rear of crankshaft pulley, mounted in engine block.


Jun 17, 2009 | 1996 Chevrolet Caprice

1 Answer

Heat


So I am guessing the heater core, the only other thing it would be would be any leak that is allowing moisture in the car. is the floor board wet on the passengers side?

Feb 23, 2009 | 1988 Chevrolet Caprice

1 Answer

1996 chevy caprice rotors


usually there is a lock washer with tabs that are folded up around the main nut these must be folded back down flat then the main nut can be removed allowing the rotor to be removed hope this helps glenn.......................

Nov 22, 2008 | 1996 Chevrolet Caprice

1 Answer

1996 chevy caprice wiring diagram for cruse control


Are you trying to instll he cruse system in another car? BAD IDEA Are you trying to fix it in your car? first cause of fail is the third stop ligh blow

Jul 15, 2008 | 1996 Chevrolet Caprice

Not finding what you are looking for?
1996 Chevrolet Caprice Classic Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...