Question about 2000 Ford Expedition

1 Answer

We have a 2000 Ford Expedition that jerks or feels like you hit a hole in the road when it goes into overdrive.If we turn the overdrive off it does not do this. How do we fix it ?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

When do you step all the way to the floor on the throttle does it runs good again? If yes, then you have a bad torque converter clutch. This clutch is inside of your torque converter which is placed between the engine and the transmission. You will need to remove the transmission for this kind of work. Even if it is not the torque converter, the problem will be inside of the transmission. It is not going to be an easy fix.

Posted on May 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Due to clogged catalytic converter someone drilled holes in it and now overdrive doesn't work , working on a 1999 ford expedition , how do I fix this , what all would stop overdrive from working ?


Catilytic converter was stopped up , drilled holes , now it's ...

www.fixya.com/cars/t25967686-catilytic_converter_stopped_up_drilled
Nov 19, 2015 - Catilytic converter was stopped up , drilled holes , now it's loud , runs better but overdrive doesn't work now - Cars & Trucks question. ... SOURCE: doesdrilling holes in a clogged catalytic converter help vehicle? ... Related Questions: ...Feb 20, 2014 ' 2002 Ford Expedition ... 11 people viewed this question ...

1999 ford expedition , 5.4 v8 , stopped up catalytic converter ...

www.fixya.com/cars/t25967793-1999_ford_expedition_5_4_v8_stopped
Nov 19, 2015 - 1999 ford expedition , 5.4 v8 , stopped up catalytic converter , drilled holes ... up catalytic converter , drilled holes , now it's loud and overdrive doesn't work now ... When catalytic converters go bad, the porcelain matrix inside comes loose and is noisy. ... Related Questions: ... 11 people viewed this question ...

comments on How to check your vehicle's catalytic converter.

https://www.youtube.com/all_comments?v=IzyvL5tQLzU
Wouldn't you want to plug the holes you drilled afterwards? .... I believe that the dealer is actually the one that doesn't know things that happen to your car. ... There are some who work at the dealership and are car fanatics who mess with their cars. ..... replaced battery, now someone told me sounds like a plugged convertor, ...

1998 Ford F150 4.6L with clogged cat - YouTube





Dec 02, 2015 | Ford Cars & Trucks

1 Answer

I've replaced upper ball joint both, cv axles both. And my expedition still clunks and jerks when I turn corners. Why?


We can't guess for you

The bottom ball joints usually go on those vehicles

Can't the shop that did the work tell you why?

Your not replacing worn parts obviously

Any experienced person to road test & inspect
under it, can resolve that problem

Mar 13, 2013 | 1999 Ford Expedition

1 Answer

2000 ford expedition will not change gears after reaching 40mph then car goes into neutral. Then if i put the car into overdrive it runs fine.


The infamous Exploder transmission. Try a tranny flush and new gasket. More likely it needs a new transmission.

Jan 16, 2013 | 2000 Ford Expedition

1 Answer

2002 ford expedition shifts fine but when you start to go up a hill then it feels like it going in an out of overdrive untill you give it a little gas some one help please


try turning the overdive button off if the problem goes away then its proprob. a tcc solinoid or the converter itself i would have it ckd 4 codes 1st and have the trans fluid flushed and and shudderfix avail. and most parts stores

Jun 04, 2012 | 2002 Ford Expedition

1 Answer

Where is the hole in the 2000 ford expedition firewall


There should not be a hole in the firewall. Even a very small hole would be very loud with road noise.

Jun 20, 2010 | 2000 Ford Expedition

1 Answer

Overdrive light blinking


Have a mechanic check for loose wires going to the transmission. Usually when the OD light blicks it's because there is something wrong with the transmission. Have your transmission fluid checked. If it appears brown, dark, or smells burnt have it and the transmission filter replaced immediately. It may also be that you have a leak in the transmission and need to add transmission fluid so that it's at the right level.

Nov 24, 2008 | 2000 Ford Ranger SuperCab

1 Answer

Ford expedition **** problems


If you had the transmission replaced, it is possible that the spline was not lined up right, i would take it back and tell them to fix it....

Jul 03, 2008 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...