Question about Hyundai Motor 1998 Accent

1 Answer

Where do the wires go when wiring a starter motor on a 97 Hyundai accent - i have a negative wire but cant remember where to attach it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 5,763 Answers

The neg wire goes on the bolt that holds the starter, there should be a positive cable wire that goes to the big bolt on the back of starter seleniod and then a small wire that goes to the small connection on the seleniod,then then neg goes to the block or one of the bolts that holds the starter in,

Posted on May 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring mex bt31pw cd player to 2003 hyundai accent with no wiring adapter. Need to know what color wire go to what on the vehicle


2003 Hyundai Accent Car Radio Stereo Wiring Diagram
Car Radio Constant 12v+ Wire: Orange/Black
Car Radio Switched 12v+ Wire: Pink
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Green/Orange
Car Stereo Dimmer Wire: Green/Black
Left Front Speaker Positive Wire (+): Red
Left Front Speaker Negative Wire (-): Blue
Right Front Speaker Positive Wire (+): White
Right Front Speaker Negative Wire (-): Brown
Left Rear Speaker Positive Wire (+): Green
Left Rear Speaker Negative Wire (-): Orange
Right Rear Speaker Positive Wire (+): Orange/Blue
Right Rear Speaker Negative Wire (-): Black/White

May 01, 2017 | Hyundai Cars & Trucks

1 Answer

I need to replace the starter on a 2001 Hyundai accent. How do I do so?


1. Raise front of vehicle
2. Disconnect Negative Terminal of Battery
3. Remove Intake Air Box & Hose (air filter box)
4. Remove two 14mm starter bolts (transmission side)
5. Go under vehicle & disconnect starter wiring, then remove starter.
Installation is reverse order of removal


ghost45_50.jpg

Sep 01, 2011 | Hyundai Accent Cars & Trucks

1 Answer

I cut the battery terminals off the cords in order to replace them and now i cannot remember which wire go to positive and which go to negative i have 4 wires 2 blacks 1 white 1red the car is a 1998...


Check to see if any of the wires have a single wire running off of it to the body somewhere, or attached to a bolt on the intake somewhere. This will indicate that it's a grounded wire, which means the battery wire attached to it will be your negative wire.

Your positive will run to a bunch of other wires, and into modules and starter and alternator and other electrical products.

I hope this helps, post back if still unclear!

Jan 11, 2011 | 1998 Hyundai Elantra

1 Answer

How to change starter motor


disconnect battery first find starter its the thing your red battery wire hooks to take nut off old starter that holds wireing on the starter now the bolts that hold the starter in place that all there is to it remember not to hook battery back up until last on new starter theres also books at auto parts store they will let you look at for free how to do it good luck

Nov 29, 2010 | 1997 Hyundai Accent

1 Answer

Starter diagram for a 1994 dodge intrepid


3.3L Engine
  1. Disconnect the negative (-) battery cable. Raise and safely support the front of the vehicle on jackstands. Fig. 1: Disconnect the negative battery cable 88172g31.gif

  2. Remove the three bolts attaching the starter to the engine/transaxle. Fig. 2: Remove the three starter mounting bolts 88172g32.gif
    CAUTION
    Be careful when removing the starter motor mounting bolts, the motor can be quite heavy. Personal injury could result if the starter motor falls from its mounting position.
  3. Remove the starter from the the transmission housing. Position the starter to gain access to the wiring connectors.
  4. Remove the battery positive cable nut from the starter and remove the cable. Fig. 3: Remove the battery positive cable nut from the starter and remove the cable 88172g33.gif

  5. Disconnect the push on solenoid connector.
  6. Remove the starter from the vehicle. To install:
  7. Clean all wire terminals of dirt, grease or corrosion.
  8. Attach the electrical wire connectors and secure with the mounting nuts. Tighten the starter solenoid B+ nut to 90 inch lbs. (10 Nm) and the solenoid wire-to-starter nut to 55 inch lbs. (6 Nm).
  9. Hold the starter motor in place, then secure in place with the 3 attaching bolts. Tighten the bolts to 40 ft. lbs. (54 Nm).
  10. Lower the vehicle.
  11. Connect the negative (-) battery cable.
3.5L Engine
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle.
  3. For easier servicing, do not remove the wiring from the starter motor at this time.
  4. Remove the three bolts attaching the starter to the engine. Fig. 4: Remove the three bolts attaching the starter to the engine 88172g34.gif

  5. Remove the starter solenoid assembly from the transfer housing. Position the starter to gain access to the wiring connectors.
  6. Remove the battery positive cable nut from starter and remove the cable.
  7. Disconnect the push on solenoid connector.
  8. Remove the starter from the vehicle. To install:
  9. Clean all wire terminals of dirt, grease or corrosion.
  10. Attach the electrical wire connectors and secure with the mounting nuts. Tighten the starter solenoid B+ nut to 90 inch lbs. (10 Nm) and the solenoid wire-to-starter nut to 55 inch lbs. (6 Nm).
  11. Hold the starter motor in place, then secure in place with the 3 attaching bolts. Tighten the bolts to 40 ft. lbs. (54 Nm).
  12. Lower the vehicle.
  13. Connect the negative battery cable.
prev.gif next.gif

Oct 15, 2010 | Dodge Intrepid Cars & Trucks

1 Answer

Where is my starter and how do I change my starter?


2000 Hyundai Elantra 2.0L MFI DOHC 4cylRemoval & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable Speedometer and shift control cables Starter electrical connectors Starter motor
  3. 2e15922.jpg

    Fig. Exploded view of the starter-XG 300 and XG 350

To install:
  1. Install or connect the following:
    Starter motor and torque the bolts to 25 ft. lbs. (34 Nm) Starter electrical connectors Speedometer and shift control cables Negative battery cable
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    Negative battery cable Air intake assembly Speedometer cable Shift cable Starter wiring connectors Starter motor
To install:
  1. Install or connect the following:
    Starter motor and torque the bolts to 20-25 ft. lbs. (26-33 Nm) Starter wiring connectors and torque the battery cable nut to 88-140 inch lbs. (10-16 Nm) Shift cable Speedometer cable Air intake assembly Negative battery cable
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable Air intake assembly Speedometer cable Shift cable Starter wiring connectors Starter motor
To install:
  1. Install or connect the following:
    Starter motor and torque the bolts to 20-25 ft. lbs. (26-33 Nm) Starter wiring connectors and torque the battery cable nut to 88-140 inch lbs. (10-16 Nm) Shift cable Speedometer cable Air intake assembly Negative battery cable
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable Speedometer and shift control cables Starter electrical connectors Starter motor
To install:
  1. Install or connect the following:
    Starter motor and torque the bolts to 25 ft. lbs. (34 Nm) Starter electrical connectors Speedometer and shift control cables Negative battery cable.

All Others
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable and wait at least 3 minutes Speedometer cable and shift cable from the transaxle Starter motor wiring Starter motor bolts and the starter
To install:
  1. Installation is the reverse of removal. Tighten motor retainers to 20-25 ft. lbs. (27-34 Nm).

Hope helps (remember rated this).

Jul 14, 2010 | 2000 Hyundai Elantra

2 Answers

How to change a starter on a 4.3 gmc sonoma 1997


STARTER REPLACEMENT ( 1995-97 4.3L MODELS )

ad8746e.jpg

Fig.: The starter motor on later model 4.3L engines is retained by two long bolts
  1. Disconnect the negative battery cable.
  2. Raise and support the front of the truck safely using jackstands.
  3. If necessary for access, disconnect the front exhaust pipe.
  4. If equipped, remove the starter heat shield.
  5. On the 2.2L engine, remove the brace rod from the front of the engine and the bell housing.
  6. On 2.2L engines, remove the drivers side wheel to access the starter motor wires and the starter motor attaching bracket-to-engine bolt through the opening in the wheel well.
  7. Disengage the wires from the starter solenoid.
  8. On the 2.2L engine, remove the attaching bracket-to-engine mount bolt.
  9. Remove the starter-to-engine block bolts. When removing the last bolt, be sure to support the starter to keep it from falling and possibly injuring you.
  10. Carefully lower the starter and shims (if equipped) from the vehicle.
  11. If necessary, remove the bracket (2.2L engine) or the shield (4.3L engine) from the starter assembly.

To install:
  1. If removed, install the bracket or shield to the starter, as applicable. Tighten the bracket nuts to 97 inch lbs. (11 Nm) or the shield nuts to 106 inch lbs. (12 Nm).
  2. Carefully raise the starter and shims (if equipped) into position in the vehicle and thread one of the retaining bolts to hold it in position.
  3. On the 2.2L engine, loosely install the bracket-to-engine mount bolt.
  4. Install the remaining starter mounting bolt, then tighten all mounting fasteners to 32 ft. lbs. (43 Nm).
  5. Engage the wiring to the solenoid as noted during removal.
  6. On the 2.2L engine, install the brace rod and tighten the retainers.
  7. If disconnected for access, install the front exhaust pipe and tighten the fasteners.
  8. If equipped, install the starter heat shield.
  9. On 2.2L engines, install the drivers side wheel.
  10. Remove the jackstands and carefully lower the truck.
  11. Connect the negative battery cable.

Hope this help (remember rated this help) Good luck.

May 11, 2010 | 1997 GMC Sonoma

1 Answer

1997 hyundi accent parked in driveway next day would not start no click when you turn the key battery is charged


hi from uk locate the starter then attache to starter is the starters solenoid where the positive lead from battery is connected now check the thin wire with a push on spade terminal it is /should be connected to solenoid of its own make sure this wire is pushed on securely with a click that locks it in place ? i have come across a few hyundai accents with this wire not correctly secured giving the same problem as yours the location of the wire if you look ? would be best re-routed from its route to below cable so it cannot be accidently pulled off solenoid during services? as i am sure is possible cause or not secured correctly at factory ? in 1st place ?hope this helps?

Mar 09, 2010 | 1997 Hyundai Accent

1 Answer

How hard is it to change the starter on a Hyundai accent


should be very easy,first disconnect the battery,then remove the positive wire of the starter motor solenoid with a 12mm spanner and the ignition wire should just pull off with your fingers,then there should be 2 or 3 bolts that hold the starter motor to the gearbox,which would also be a 12mm spanner or a 14mm spanner,then it is out,to fit is the reverse

Nov 19, 2009 | 2001 Hyundai Accent

2 Answers

I need to find a wiring diagram for a 99 hyundai accent


Which wires do you need to re-connect? Bbattery cables: red/postive will connect to your starter/solenoid and the black/negative cable will be connected to your chassis by a bolt in the engine compartment.

Aug 29, 2009 | 2000 Hyundai Accent

Not finding what you are looking for?
Hyundai Motor 1998 Accent Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...