Question about 1987 Acura Integra

1 Answer

What tools to use to remove front struts on 87 acura integra

How to remove front struts on 87 acura integra

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 55 Answers

1) Jack up the ront part of the car and support it with safety stands.
2) Remove the brake hose clamp bolt.
3)Use floor jack to support the lower control arm. You can place the jack under the ball joint. This is very important. You need to have the jack under the ball joint otherwise force of the torsion bar will jump and cause injury.
4) Remove the self-locking bolt on the knuckle. Slowly lower the jack to remove the strut from the knuckle.
5) Remove two self locking nuts from the upper part of the strut.
) Remove the strut ( front damper) from the car.

Posted on Jun 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i push down on the front right side of my 1990 integra i hear what sounds like a moaning noise, almost like a rusty swing. What could it be?


Maybe a rubber bushing, like a control arm bushing. Car is 22 years old now, so you could expect some worn suspension parts. Are your struts and coils in good shape? You might want to get under car or close to the noise while the wife sits on it and try to pinpoint the noise-front of wheel, back of wheel, behind...Good luck.

Jan 14, 2012 | 1990 Acura Integra Hatchback

1 Answer

How to take off upper control arm on 96 integra


Remove tire, remove lower ball joint, remove cv shaft, remove strut, then remove upper control arm.

Ther is another way to do it but it can be frustrating, You could take tire off , remove the upper bolts in the engine bay and the upper balljoint from the car but the bracket will stay hooked around the strut, There is a thinner metal on the backside of the upper control arm that is removable but requires patience and force, then it will fall into your hands without disconnecting the strut cv shaft or lower ball joint, But you have to remember to reinstall the thin plate before reinstalling the upper ball joint

Oct 19, 2010 | Acura Integra Cars & Trucks

1 Answer

C1994 acura integra will not start


What else have you tried? How do you know it is not the fuel pump? What tools do you have available to troubleshoot?

Jul 17, 2010 | 1994 Acura Integra

2 Answers

Alternator removal on 87 acura integra


you need to loosen and remove the alternator mounting bolts and remove the V - belt and alternator assembly.

Dec 05, 2009 | 1987 Acura Integra

1 Answer

How do i lower my 89 acura integra


you will need lowering sprongs and struts, then camber kits for alignment afterwards. if you just by cheap lowering springs, you will not be able to align the car properly after, and it will handle terrible and prematurely wear your tires.

Nov 12, 2009 | 1989 Acura Integra

1 Answer

Creaking/friction when I hit a bump?


Still sounding like a bushing, but it also could be related to a strut. I have tried this in the past....jack the car up and ONLY on one side first, use WD-40 and spray each of the bushings well. Leave the upper strut area alone...do your normal driving. If you still have the squek/crunch, etc, spray the upper strut area. A rare ocassion it can be the upper strut mount.

let me know how it goes!

Oct 27, 2009 | 1990 Acura Integra Hatchback

1 Answer

What is the timing order for a 1987 acura integra ls


Hello baddboy1221, my name is JShreader. Thank you for choosing fixya.com.

The Firing Order for your 87 Acura Integra is...

Firing Order: 1 3 4 2

c409a65.jpg
I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!

Mar 31, 2009 | 1987 Acura Integra

1 Answer

Struts


there is a bolt or bolts at the top of the strut too.... usually you can access them from the truck.... lift up the round plastic covers over top of them.


Robert

Sep 21, 2008 | 1993 Acura Integra Hatchback

1 Answer

1996 Acura Integra LS


need to replace the strut

Sep 09, 2008 | 1996 Acura Integra GS-R

Not finding what you are looking for?
Cars & Trucks Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...