Question about 2000 Mercury Villager

1 Answer

2000 Mercury Villager electronic door openers

Some of the times when you push the electronic door opener to unlock the doors, both the remote and the ones on the door handles, the door relocks. This happens as fast as you let off the button.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers

You have a wire intermittently shorted to ground. It could be in either door wiring. I ahve a TSB on our site but it only helps 50% of the time.

go here and read files.


I am working on which wire to cut to defeat the locking issue.


http://groups.yahoo.com/group/villagerquest/

Posted on May 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I remove the rear latch from the hatch door?


Solution: you need the valet key and there should be a way to open it from the inside -jeff ps please rate , i have had the same problem many times with my mercury villager. one thing i have found to work on more than one occasion is while it is closed, push the back hatch as if you were shutting it. hit the lock button ( either on remote or inside of van ). then push the handle out on the hatch to make sure it will catch all the way. unlock the doors and pull on the handle, the hatch should open with no problem. , if it is electronic check the fuses first. if not electric spray with WD-40 in key hole and around button

Feb 07, 2016 | 2008 Kia Sportage

1 Answer

Problem with 2002 Mercury Villager


The driver door module check the plug and check for corrosion in it and the plug the module is on the driver door under the door panel also do you have keyless entry that keypad could be shot a lot of people punch there #S in using there key which puts a hole in it letting water and outside air come in which messes it up so you know not me

Oct 31, 2017 | 2002 Mercury Villager

1 Answer

2001 Mercury Villager keyless remote is malfunctioning


Keyless Entry
The keyless entry system consists of the following:
  • smart entry control(SEC)/timer module
  • keyless entry remote transmitters
  • power door lock actuators
  • body side door power door lock actuator
  • liftgate actuator
  • power door lock switches
  • door ajar switches
  • Principles of Operation
    All doors can be locked at once by turning the door key lock switch to the locked position. An individual door can be unlocked by moving the door key lock switch to the unlocked position and turning it again within five seconds; all the doors (including the liftgate) will unlock.
    The smart lock system is designed to keep the driver from locking his keys in the car. It will lock and then unlock all the doors if the smart entry control(SEC)/timer module detects the following conditions:
    • The ignition key still in the ignition.
    • A front door is open.
    • A door lock switch has been pushed to the lock position.
    The panic feature has a duration of 30 seconds from the last time the PANIC button is pressed. When locking the doors from the remote transmitter, the horn chirp/lamp flash feature can be disabled or enabled by holding the LOCK and UNLOCK buttons for two seconds. The hazards will flash three times to confirm that the feature has be enabled or disabled.
The control module probably see's an input that shouldn't be there . lock Switch , door ajar etc... Don't think it has anything to do with the remote . Some part stores have a tester to see if signal from the remote is working . Or the dealer ! Take it an see if your remote is sending a signal without you pressing any buttons .
If it is you need a new one .

May 19, 2017 | Cars & Trucks

1 Answer

If I remove the door lock fuse on a 1994 Mercury Villager will I still be able to open the door with my key?


Yes, that only effects electronic equipment. The lock has a manual operation so if the battery goes down you can still get in and out of the vehicle.

Sep 28, 2011 | 1994 Mercury Villager

2 Answers

Lost remote to disable alarm on 2000 mercury villager how can i disable it and start my van


If you have the factory alarm system, you can put your key into either door and lock and unlock the door, that signals the computer to deativate the alarm. If you have an aftermarket alarm system installed, it will have to be removed and the wiring that the alarm ties into must be restored to factory design.

Apr 23, 2010 | 2000 Mercury Villager

2 Answers

I CAN NOT OPEN THE DRIVER DOOR PASAGER DOOR AND REAR DOOR BY KEY


If I understand you correctly your saying that the only door on your van that you can unlock with a key or remote is the sliding side door and that all the other doors will not unlock with the key or the remote? If this is the case then the two front doors most likely have a problem with the fuse to the actuators so you should check the fuse in the fuse box which may be located either under the drivers dash or in the engine compartment on the drivers side over the wheel well.

Aug 21, 2009 | 1996 Mercury Villager

2 Answers

My back hatch door doen't want to open


You need to climb in the back and remove the plastic panel from the hatch to access the lock. There may be a small access door over the locking mechanism to help you avoid removing the whole thing. Could be dirty and sticky and fixable with a bit of graphite lube.

Nov 17, 2008 | 1996 Mercury Villager

1 Answer

I HAVE A 1996 MERCURY VILLAGER AND YESTERDAY THE BACK HATCH WOULD'T OPEN. IT'S LIKE IT 'S CAUGHT ON SOMETHING


The handle may be stuck in the open position due to rust. Try to push back the handle and play (open/close/open) with the lock control. The same thing will eventually happen to the sliding door, and the culprit is the inside handle, stuck in the open position, preventing the door to close completely. Good luck.

Jun 29, 2008 | 1996 Mercury Villager

Not finding what you are looking for?
2000 Mercury Villager Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...