Question about 1992 Chevrolet C1500

3 Answers

I need to know how to set the timmin on my 1992 Chevy Z-71. It has a 5.7 and it is 4x4

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 564 Answers

Sorry thought u were doing timing chain,

Posted on May 15, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

Either under the black cover on the passenger side firewall in theengine compartment if you have one or under the passenger carpet you havea brown wire theat needs to be unplugged, When you do this the service engine light will come on and the idle will lower. Then set to 0. . If you do not disconnect the wire approx 16 or 17 is the sameas 0. If you snap throttle while looking at the timing mark with the wire connected it will go to 0 for a split second. The timing mark is in the middle ot the big V cutout

Posted on May 15, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 564 Answers

Line up the two marks on the timing gears,,take out spark plugs,,,spin motor over four times,,line up marks,,if they line up put it back together,,don't want to not ck it,,,because if u are a tooth off u have to take it a part a gain,,((

Posted on May 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Idles but doesnt respond to throttle


The timming belt might have slipped and jumped a tooth, making the engine completely inoperative. The timmin needs to be re-setted by aligning pulleys and crankshaft to teir marks and re

Nov 10, 2013 | 2002 Kia Sedona

1 Answer

1992 Chevrolet Tahoe timing


timing on the chevy motors do not very much.
most of the older 350's timing are set about 8 deg before top dead center. some california smog certified 350 timing were set back to 0 deg or, at top dead center. check under the hood for a smog decal. it should have the timing specs, or it might say "timing not adjustable" or N/A. if it is missing the decal i would set it at 8 deg, road drive it, and listen for enging pinging on accelerating under load. if no ping i would leave it at 8 deg,if there is slight pinging i would ****** the timing in 2 deg increments until the pining stops. i would stop if i reach reach 0 deg or top dead center.

Sep 12, 2012 | Cars & Trucks

1 Answer

92 dodge D150 3.9l replaced timmin gears and chain new distributor rotor wires plugs timmin is dead on but will not start


Can you take the valve cover off and turn the crank until the number one valve closes, then check the rotor on the dist ?
TDC for number one cyl is when that intake valve closes.
I assume you checked the compression and all 6 cylinders are ok ?
If you have compression and the valve timing is close, you should be able to turn the dist and get it to backfire or something if the ignition timing is the only problem.

Jul 19, 2012 | 1992 Dodge Dakota

1 Answer

1992 chevy suburban blower motor


If its not working at all try this.

Find it up under the passenger side of the dash. They are a real treat to get at. With the key on and the blower speed setting set to high tap on the blower motor. If it starts working replace it. If it doesn't start working let me know and I'll get you some info to check wiring.

Feb 09, 2012 | 1992 Chevrolet Suburban

1 Answer

Heater does not work. Possibly fuse, need to know which fuse is for the heater. 1992 Chevy C1500.


1992 chevy c1500 5.7 front speakers and horn wont work ( wrong fuse or what)

Jan 25, 2011 | 1992 Chevrolet C1500

1 Answer

How to repair heater core for chevy cavalier


I installed a heater core in a 2004 Chevrolet and need to know how to hook up the vent cables (1 goes to the left and 1 goes to the right) for the back of the control knobs. Do they screw in or a are snapped in cant tell.

Nov 24, 2009 | 1992 Chevrolet Cavalier

1 Answer

Timing for a 92 chevy geo tracker


Point the pulleys to there timing marks and point the dist. to #3 postion......

Oct 19, 2008 | 1992 Geo Tracker

1 Answer

Help


Set it 4 degrees before top dead center.

Oct 17, 2008 | 1992 Chevrolet Camaro

3 Answers

Need to know fireing order from distributor to motor


firing order for a chevy k1500 series 350 is 1,8,4,3,6,5,7,2 with number one cylinder being left front side of the engine

Jul 29, 2008 | 1992 Chevrolet K1500

Not finding what you are looking for?
1992 Chevrolet C1500 Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...