Question about 2004 Honda CR-V

Open Question

2004 honda crv suddenly lost all electric. keyless remote will not work, radio will not work, no dome light working

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 03 Honda Civic LX keyless remotes . . .

THE DEALER SHOULD BE ABLE TO TELL YOU BY THE VIN NUMBER IF THE CAE CAME WITH A FACTORY KEYLESS ENTERY THAN YOU CAN BUY THE REMOTE PAD AND PROGRAM IT

Posted on Jul 12, 2008

Ad
  • 16 Answers

SOURCE: 2004 honda radio code

The dealer charges $60 for a duplicate key (with a chip in it). I wouldn't thing they would charge this for simply getting you the security coide to your readio.

The code normally comes on a separate document as does key codes or numbers. You could check the owner's manual to see if it was noted in there. (A bad idea.) Also check for a sticker inside your glove box. If that doesn't work then you need to remove the radio/CD player from the dash to get it's serial number from the back of it. Take that number with your VIN to a Honda dealer and they should be able to get your security code for you. They will likely ask for your driver's license & registration to prove you own the vehicle.

Posted on Sep 19, 2008

HitWizard
  • 67 Answers

SOURCE: 1997 Honda Civic EX Keyless entry programming

If you still have the factory radio, there is a way to split the power wire for the factory radio to the aftermarket radio. All you will need are the power and ground for your aftermarket radio, so the rest of the wires should be untouched on the plug for the factory radio. You can simply re-install the radio within the dash and retain the keyless entry as well as restoring your dome light function. Here's a PDF of some instructions. If you did not keep the radio, I would suggest looking online or ins ome junk yards, because it is needed. www.installdr.com/InstallDocs/Honda/PDF/466013.pdf

Posted on Feb 05, 2009

  • 15 Answers

SOURCE: 2005 Honda CRV dome light goes out, but not burned out

Without seeing it, I would guess that you have a problem with clean contacts. Especially in cars with smokers, the contacts of something like a fuse or a light bulb can become corroded just enough to stop the light from working. Wiggling it scrapes away the debris and allows for contact. I suggest that you take some steel wool and lightly scrub the contact points on both the light and the fixture. **Be sure to have all the doors closed so you dont short out the steel wool.** If you are concerned with the abrasive nature of the steel wool, a pencil eraser will sometimes work just as well. Either way, it just sounds dirty which is par for any car. Good luck!

Posted on Feb 27, 2009

  • 121 Answers

SOURCE: 2005 honda crv the radio is lock and i lost the

The reset code for your radio is located in the glove compartment. There should be a small sticker on the inside of the compartment door, usually near the left side. The sticker has two sets of numbers printed on it. The number set with five digits is your reset code. Use the radio preset buttons to input the code. If done correctly, the radio should come on immediately and show the factory default presets.

Positive feedback is greatly appreciated.


God Bless and good luck.


Posted on Dec 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

So i accidentally connected the power and ground of my dome light for honda crv 2004. Now it doesent work at all checked bulbs and fuse there fine. Help trouble shooting


Did you replace the bulb to verify ? Might want to check your fuses, if all good, try checking for power at the light assembly.

Nov 17, 2016 | 2004 Honda CR-V

1 Answer

2005 Honda Element radio and keyless entry stopped working


they are all easy fixes with skills and tools.
in this case a $10 voltmeter
when you do all that is battery voltage at 12.6v?
and all fuses good
and engine runs perfectly for over 1 minute?
and the idiot lamps are all happy, running,
CEL not glowing running?????????????

Jan 13, 2014 | Honda Element Cars & Trucks

2 Answers

Saturn sl1 won't turn over when dome light and radio won't work


sounds like the rke module (Remote Keyless Entry) module losing power, I hope that helps you out

Nov 25, 2012 | 1998 Saturn SL

1 Answer

Car alarm doesnt work after dead battery boost


The computer detected a fault. You SHOULD NOT drive it around with that blinking, or you will regret it. Take it to the dealership immediately and have them pull the code.

Apr 09, 2009 | 2004 Honda CR-V

1 Answer

Keyless entry suddenly stopped working


Make sure the button in the ignition switch indent is popping back up. Your lights and radio are probably staying on too.

Apr 02, 2009 | 2004 Saab 9-3

1 Answer

2005 Honda CRV dome light goes out, but not burned out


Filament gets fractured, possibly by vibration of the roof lining. I have replaced mine 4 times and while the bulb looks OK it is high resistance, buy a few bulbs and replace them when it occurs.

Mar 31, 2009 | 2004 Honda CR-V

1 Answer

1997 Honda Civic EX Keyless entry programming


If you still have the factory radio, there is a way to split the power wire for the factory radio to the aftermarket radio. All you will need are the power and ground for your aftermarket radio, so the rest of the wires should be untouched on the plug for the factory radio. You can simply re-install the radio within the dash and retain the keyless entry as well as restoring your dome light function. Here's a PDF of some instructions. If you did not keep the radio, I would suggest looking online or ins ome junk yards, because it is needed. www.installdr.com/InstallDocs/Honda/PDF/466013.pdf

Jan 08, 2009 | 1998 Honda Civic

1 Answer

2005 Toyota Camry - Electrical Issue


Let me ask you this:
Is there ANYTHING on the car that is not "factory"? (remote starter, burglar alarm, aftermarket keyless entry, etc)

If your answer is "yes" to any of the above, you may have a damaged body control module (BCM). Any Toyota with a BCM can experience a BCM failure with certain remote starters, etc....
If so, it is rather expensive to replace.

Aug 22, 2008 | 2005 Toyota Camry Solara

3 Answers

2004 honda radio code


The code for my 2004 CRV was on the side of the glove compartment next to the radio. hope this helps

Aug 01, 2008 | 2004 Honda CR-V

1 Answer

'97 Honda Civic dome lights and keyless entry problem


The signal from all the door switches is fed to the factory radio. From the radio, the signal goes to the dome light. When the radio is removed, the dome light does not work since the circuit is "cut".
Fortunately, there is a very simple workaround this problem. If the car does NOT have a factory alarm/ keyless entry, all you have to do is tie two wires together.
There are two green plugs. Get to the one that is plugged into the radio (if you have both green plugs going into the radio, then you DO have a keyless entry system).
Tie together the Green/Black (at the corner of the plug) and the Green/Red (3rd pin, opposite corner, same row).
Before tying the wires together, test both wires. With the radio plugged in, both wires should get a ground when a door is open and nothing when the doors are all closed. Once you have determined that they are in fact, the correct wires, unplug the green plug from the radio. If the dome light still works, you do not have to worry about it. If it doesn't, temporarily jump with a wire both pins at the plug. If the dome light functions correctly, then you can permanently jump the wires together. The preferred way to do this is to strip some insulation on the wires, solder a jumper wire and insulate with electrical tape.

Jun 26, 2008 | 1997 Honda Civic

Not finding what you are looking for?
2004 Honda CR-V Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...