Question about 2002 Chevrolet Silverado

1 Answer

Trying to take off the dash board to put on heater core

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 3,640 Answers

You may want to check in behind the glove box area. Thats how I got to mine. It was easy that why.. Lets just hope you don't have to come in from the front side. For there is a lot of stuff there. good luck!!

Posted on May 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 dodge durango.Had a new heater core put in found out remote start not working


Take it back to whomever replaced the heater core and tell them that your remote start no longer works. They probably moved some wires around or disconnected something that is now affecting the remote start..The heater core is usually replaced by taking apart the heater housing under the dash board, where remote start devices usually are. Good luck!

Feb 27, 2017 | Dodge Cars & Trucks

2 Answers

I have a 2000 s 10 blazer heater doesnt work..but all fues are good and tried replacing swith in cab..no effect..but blower works just fine? Any ideas


Sound like a heater core, the heater core would be under your dash..Another sign of the heater core being gone, is you would notice the floor board being wet..It is possible that maybe at some point the floor board was wet and you didn't know here it came from and didn't give it another thought..But if the blower works..I would bet heater core...Or it could be a thermostate..check the thermostate first it would be the easiest.. and the cheapest..

Nov 20, 2014 | Cars & Trucks

2 Answers

How to replace heater core in 2002 oldsmobile intrigue


most heater cores are behind the dash board on the passenger side.Look inside your engine u will see two hoses running to the firewall on the passenger side.They r going to your heater core.Sometimes you have to remove the dashboard completely it all depends on the car.

Oct 08, 2013 | Cars & Trucks

1 Answer

How do I best replace a heater core in a corsica 1995


You will have to drain all engine coolant.Disconnect your battery and your two heater core hoses that are on the fire wall in the engine compartment.Now inside the car start removing your dash.one dash is removed you will have to open you heater box to gain access to the heater core once you have gain access remove and replace.Now start replacing heater boxes dash board and reconnect heater core hoses and reconnect battery.Now top up your engine cooling system with the engine antifreeze drained you should have a extra jug of coolant in case you spilled or just needed it to top up.Now start car make sure coolant is full when cooling fans come on put rad cap on you have completed the replacement of your heater core.

Dec 27, 2010 | 1995 Chevrolet Corsica

1 Answer

How do i put a heater core in


  1. Disconnect the battery negative cable.
  2. Remove the instrument panel from the vehicle.
  3. If equipped with air conditioning, recover the refrigerant.
  4. Disconnect the liquid line refrigerant line fitting from the evaporator inlet tube.
  5. Ram: remove the accumulator.
  6. Dakota, Durango: disconnect the accumulator inlet tube.
  7. Drain the cooling system.
  8. Disconnect the heater hoses from the heater core tubes.
  9. Ram: remove the powertrain control module from the dash panel. Disconnecting wiring is not necessary.
  10. Remove the four nuts from the heater-A/C mounting studs on the engine compartment side of the dash panel.
  11. Remove the nut(s) that secure(s) the heater-A/C housing mounting brace to the stud(s) on the passenger compartment side of the dash board.
  12. Pull the housing rearward far enough for the mounting studs and evaporator condensate drain tube to clear the dash panel holes.
  13. Remove the housing from the vehicle.
  14. Lift the heater core out of the housing.
  15. Installation is the reverse of removal.



0900c152800c09c5.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Heater core removal/installation

Jan 20, 2010 | 2000 Dodge Durango

2 Answers

Changing a heater core


if by heater core you mean matrix then yes the only civil way to remove it and replace it is to taker dash board out?

Feb 27, 2009 | 1998 Ford Explorer

1 Answer

I need to replace my heater core


Bad news. You will have to remove the entire dash board to replace that heater core. Sorry

Jan 12, 2009 | 1994 Pontiac Grand Prix

2 Answers

Not sure how to get to Heater Core in 01 Chevy Blazer


Their is nothing either quick or easy to changeing a heater core. Most have to have all of the duct work from the AC and heater under the dash removed. The two hoses for the outside of the cowling to the core have to be removed. Some even have to have the floor board matts removed to have enough clearance  to take out the heater core. A really rough job. 

Jan 06, 2009 | 2001 Chevrolet Blazer

1 Answer

Not enough heat coming out of the heater of 1988 2.5L Jeep Wrangl


it sounds to me your heater core is plugged. you can try to back flush it,being this vehicle is twenty yaers old,i would say to replace it

Dec 15, 2008 | 1988 Jeep Wrangler

1 Answer

Removing/replacing a 2000 kia sportage 4x4 4 dr heater core


The heater is located under the dash board to the right and down from the radio. To remove and replace it you will have to remove the dash board down to the fire wall. Also, you will have to disconnect two hoses that connect up to it from the engine compartment. These are located in the back of the engine and down on the firewall about midway. Once you remove the dash board and locate the heater core you will be able to see the location of these two hoses. Removing the heater core is time consuming but it will save you about 700 dollars.

Oct 23, 2008 | 1999 Kia Sportage

Not finding what you are looking for?
2002 Chevrolet Silverado Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...