Question about 2004 Audi A4

Open Question

Had audi a3 on diagnostic & it showed fault code 18616 but i don't know what this fault is,turbo does not kick in .

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 345 Answers

SOURCE: there is a whizzing noise when changing gear Audi a3 55 reg!

if its only when you put your foot on the clutch it could be a release bearing fault,does it do it when you are not moving and put your foot on the clutch(engine running of course)

Posted on Oct 26, 2008

Ad
  • 61 Answers

SOURCE: Intermittant misfire Audi A3 1.8T (1999)

Sounds like carbon build-up in the cylinders. Take it and have it put on a machine called a "Motor-Vac"

Posted on Jan 28, 2009

  • 1 Answer

SOURCE: Lots of turbo noise on my Audi A3 TDI

i have no dash lights coming on so carn't stat it, i drive an 2004 sportback a3 tdi

Posted on Sep 07, 2009

  • 1 Answer

SOURCE: My Audi A3 2.0 tdi limp mode/turbo overboost

i also have done a diagnostic test and it states a turbo overboost condition and it drives fine locally but loses power on the motorway and struggles to reach 80mph? any suggestions please email me at shiz86@hotmail.co.uk

Posted on Sep 14, 2009

  • 1 Answer

SOURCE: AUDI A3 intake flag motor

I had the exact same problem. The check engine light would come on then go off. I didn't notice any drivabiltiy issues. End the end I had to replace the flapper motor, the high pressure fuel pump and the camshaft. They showed me the old parts and sure enough the camshaft lobe was worn down and the cam follower that actuates the fuel pump was in pieces. Needless to say it was very expensive. It's been a problem posted on many Audi sites. I went ahead and had the timing belt changed. Now she's as good as new.

Posted on Sep 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A6 turbocharged. Whyu does it smoke when it covers a 120km per hour?


I am going to say 'blown turbo'. As I understand it, they needs replacing every few years. They are susceptible to heat and incredible revolutions. They have to be lubricated, the seals go, and you get smoke.

Mar 20, 2016 | Audi Cars & Trucks

1 Answer

Automotive


Hello everyone having similar sort of issues , any help would be much appreciated ,, trouble with my 04 plate a3 2.0 tdi , the car loses power in first and second makes a lot of noise but doesn't really go anywhere but if ease completely off and back on again the turbo kicks in properly it also won't go over 4000 rpm unless I go off and on the throttle any help would be greatly appreciated also I took the vacuum resivour pipe off whilst checking a few things and it cured it until I was cruising down the motorway and it just lost all power so I stopped and put vacuum resivour pipe back on and after about 15 mins the vacuum must have built back up again because it was back to just being useless in 1st and 2nd gear ..???????? Help !!!! I'm lost

Apr 15, 2014 | 2009 Audi A3

1 Answer

Hi, on an audi a3 2.0 TDI would the engine position sensor coz the turbo not to kick in properly?


NO THE PROBABLE CAUSE IS A VALVE THAT ADJUSTS THE TURBO PRESSURE!CHECK FOR DTCS FIRST AND LET ME KNOW!!

Feb 20, 2014 | Audi A3 Cars & Trucks

1 Answer

AUDI A3 OVERBOOST 20. TDI 04 SAFE MODE ISSUE


Code P0234 Check N75 boost control solenoid and all vacuum hoses to and from N75.

If performance returns after brief ignition key cycling, Off /On.....check for vacuum to turbo dump valve canister.

If performance is always low, check turbo vanes for sticking or 'snow screen' in snorkel to air filer is not restricted..

Oct 30, 2013 | 2005 Audi A3

1 Answer

Audi a3 1.6tdi fault code p261a


Got my 2011 audi a3 1.6 tdi se hooked up to a diagnostic machine last night and these were the fault codes that came up _ 01500, 00927, 00979 AND 01499. I KNOW IT'S TO DO WITH THE LIGHTING CIRCUITRY BUT WHAT DOES IT RELATE TO IN REPAIRS?

Aug 13, 2013 | Cars & Trucks

1 Answer

My Audi jilts when accelerating


Hello
The engine and automatic transmission in this vehicles drive train are fully electronically controlled by a computer called the PCM (Power Train Control Module). Whenever a problem like this occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM

Aug 09, 2012 | Audi Quattro Cars & Trucks

1 Answer

My Audi a3 20l tdi radio it says 2 safe, I disconnected the battery, now the radio want the code, I don't know the code, and when I press the scan and rds it doesn't respond, after pressing scan...


take it to the 4s garage, if you want to find out the problem by yourself,you first have some professional tool , there are some diagnostic that always can figure out the problem i can show you: www.xcardiag.com/

Apr 12, 2012 | 2004 Audi A3 Sportback

4 Answers

My Audi A3 2.0 tdi limp mode/turbo overboost


i also have done a diagnostic test and it states a turbo overboost condition and it drives fine locally but loses power on the motorway and struggles to reach 80mph? any suggestions please email me at shiz86@hotmail.co.uk

Apr 21, 2009 | 2005 Audi A3

1 Answer

There is a whizzing noise when changing gear Audi a3 55 reg!


if its only when you put your foot on the clutch it could be a release bearing fault,does it do it when you are not moving and put your foot on the clutch(engine running of course)

Oct 26, 2008 | 2007 Audi A3

Not finding what you are looking for?
2004 Audi A4 Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...