Question about 2006 Ford F-150

1 Answer

I have electronic controls for the heater, A/C and

I have electronic controls for the heater a/c and none of the buttons work. It seems one of them must be stuck. I think its the auto button. Any suggestions

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 984 Answers

You can try removing the panel connectors, resetting it and running the calibration test.

Open the ashtray, and pull on each lower cover of the center trim panel. This is held on with spring clips, 3 on each side ( black circles in the picture below ). When you get to the top, be careful, the Passenger Side Airbag Deactivation lamp is on the center trim panel and has small wires ( green circle ).
The blue circles are the cam over connectors on the HVAC control panel, pivot the bail out, and the connector wil unplug itself. Reattach and run the self test calibrate ( if it will take it ) listed below the picture.
I have electronic controls for the heater, A/C and - 04683d9.jpg

Electronic Automatic Temperature Control Module On-Demand Self-Test The EATC module on-demand self-test will retrieve on-demand (hard fault) DTCs only, it will not retrieve continuous DTCs. Continuous DTCs can be cleared when exiting the EATC module on-demand self-test. Make sure to retrieve continuous DTCs by carrying out the Electronic Automatic Temperature Control Module - Retrieve Continuous DTCs procedure before clearing any continuous DTCs.

Posted on May 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The air is warm coming out of the passenger side vents and cool out of the driver side vents,But the temperature button won't increase the temperature. Seems stuck on Max Cold


it's dead, jim. time for a troubleshoot and repair. These toyotas are notorious for climate control problems. Either your control panel is broken, or the electronic air blend motor is broken, or some plastic in between. 25315509-zejmo41uy3tce5x43qikgza0-5-0.gif

Dec 10, 2014 | 2004 Lexus RX 330

1 Answer

I have an1988 Chrysler fifth avenue. It has a miss, when you pull up to stop sign or red light it will stall out and die but starts right back up, sometimes back fire through carb if you hold gas throttle...


Check for a vacuum leak under the hood. Most heater and a/c systems rely on vacuum pressure to open and close doors and direct hot and cold air. The vehicle stalling could also be that vacuum leak. Look for a small diameter hard plastic hose. They always seem to dry rot, if it's bad it will fall apart when you move it. Best way to find a leak is to use a 2'-3' piece of water hose. Put one end against your ear to listen for vacuum leaks while the engine is running.

Nov 13, 2013 | Cars & Trucks

2 Answers

None of the window buttons work except from the driver controls which i just replaced , it seems as though the child lock-out control is engaged but it is not . i also checked all the fuses with no luck...


even though it appears the lockout swith on the master control is not locking out the other switches it prob is ..its a common problem my money is on that switch

Feb 20, 2011 | 2006 Ford Expedition

1 Answer

No heat changed thermostat and just pulled the heater core which seems fine water from kitchen faucet flows thru both ways but cant find any control valve in the heater hoses to see if it is working


firs check both heater hoses are hot to the heater core after it is warmed up. If they are hot the heat cool door is not moving make sure the linkage for the actuator door is hooked up. If that isnt working test the module that moves it.If it is manually or vaccum operated there will be a heater valve inline the heater core hose. Make sure your vaccumm is supplied to the heater box from the engine. If it is staying on defrost you may be missing vaccum supply to the heater control. If it is electronically controlled the door actuator module is bad or not getting power. Sometimes the heater hand controls are the problem. sometimes the dash control separates and gives a vaccum leak.

Dec 11, 2010 | 1991 Oldsmobile Cutlass Calais

1 Answer

I have electronic controls for the heater, A/C and none of the buttons work. It seems one of them must be stuck. I think its the auto button. Any suggestions


i would take the panel off and take electrical cleaner and clean each button one by one if this dosnt work i would try buying a new panel cause at all ends the fords have been having alot problems with there panels lately :)

Mar 23, 2010 | 2006 Ford F-150

1 Answer

Heater motor not working, checked fuses none,ford van


Probably the resistor plug located under the dash.

Dec 29, 2009 | 1989 Ford Econoline

2 Answers

1997 Bonneville SSE, when the heater is turned on, only cold air


you may have a failed blend air door motor/actuator. this part will regulate the amount of air from the heater core depending on the temp setting on your electronic climate control unit. if it has failed, it will be stuck at the temp that it was last set at when it quit working. it is also possible the heater core may be plugged up, but using the gm recommended dexcool coolant and flushing it out every 5 years, it should not be plugged up. you can pull the 2 heater hoses off the heater core on the passenger side of the engine compartment firewall and see if the heater core is the problem. caution-do not use a high pressure air hose to blow through the heater core as this could damage it and cause a leak!

Oct 15, 2009 | 1997 Pontiac Bonneville

1 Answer

1992 Lexus SC400 No Heat, AC, Defrost (mode controls)


Change the 15amp fuse in the kicker fuse panel labeled cig. My stopped working for the same reason.

Feb 20, 2009 | 1992 Lexus Sc 400

Not finding what you are looking for?
2006 Ford F-150 Logo

454 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...