Question about 2004 Nissan Titan
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
2004 Nissan Titan when using the kick down and the accelerator pedal is about 75% depressed the RMP go into the red zone then drop to about 25K and comes close to stalling. Why?
Posted on Mar 04, 2009
i had the same problem on my 04 titan and it was the gas cap.. autozone can flash the system and get rid of the check engine light for u. make sure u twist that gas cap till it clicks from now on
Posted on Aug 22, 2009
From the 2004 Titan Factory Service Manual, You can get one Promanuals. I hope this helps. It's straight forward procedure.
1. Drain engine coolant from the radiator.
2. Remove air cleaner and air duct assembly.
3. Disconnect A/T fluid cooler hoses.
(Install blind plug to avoid leakage of A/T fluid)
4. Disconnect radiator upper and lower hoses from radiator.
Do not allow coolant to contact drive belts.
5. Remove the lower radiator shroud.
( Release the tabs, pull lower radiator shroud rearwards and
down to remove.)
6. Remove the radiator shroud upper bolts and remove the radiator
7. Remove the A/C condenser bolts and brackets.
Lift A/C condenser up and forward to remove from radiator.
8. Remove A/T oil cooler bolts and oil cooler from radiator and
9. Lift up and remove the radiator.
Do not damage or scratch air conditioner condenser and
radiator core when removing.
Posted on Oct 10, 2009
DTC (Diagnostic Trouble Code) U1000 is a problem with the CAN communication line.
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation
This DTC sets under the following conditions:
The ECM (Engine Control Module) has lost communications with one or more of the onboard control units for a specified amount of time.
To diagnose this code you must scan all the other modules to see if they can communicate with the scanner. If all the modules are able to communicate with the scanner then the problem is intermittent and can be very hard to find. If you have one or more modules that fail to communicate then the problem is the data line to that (those) module(s).
Posted on Dec 19, 2010
Tips for a great answer:
Dec 05, 2016 | Nissan Cars & Trucks
Oct 08, 2015 | Cars & Trucks
Dec 24, 2013 | 2005 Dodge Dakota Quad
Controller Area Network Line Malfunction
CAN connector is damaged or is disconnectedCAN communication line is open, shorted to ground or to powerOne of the modules is shorted and pulling the CAN voltage low
Jan 27, 2013 | 2004 Nissan Maxima
Jan 25, 2012 | 2006 Nissan Titan
Feb 27, 2011 | Nissan Sentra Cars & Trucks
Oct 21, 2010 | 2004 Nissan Titan
Aug 02, 2009 | 2005 Nissan Titan
Apr 30, 2009 | 2007 Nissan Titan LE
514 people viewed this question
Usually answered in minutes!