Question about 1991 Honda Accord

2 Answers

I have a 91 honda accord ex, one of the front lug

I have a 91 honda accord ex, one of the front lug bolts broke off and landed in between disc, I pulled hub nut off, but I can't separate to get out lug bolt out, do I need a hub puller?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Honda Master
  • 1,619 Answers

If you undid the hub nut and retainer ring with clip it should tap off once brake caliper is removed.

Posted on May 15, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Honda Master
  • 1,455 Answers

The brake disc is pressed onto the hub and to separate it will also require pressing out.

Posted on Oct 07, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant get the wheel hub off


Cutting torch to get stripped bolt off, or a hacksaw and a couple of hours.

Apr 20, 2014 | 1994 Honda Accord

2 Answers

My 91 Honda Accord EX wagon has a broken lug on front driver side. How do i fix it, & will it be ok in the meantime with the three lug nuts on tight?


It is not recommended to drive it like that. It's not too bad to replace but it depends on your level of mechanical skill, You need to remove the brake caliper and disc and then you can simply knock the remains of the broken stud out with a hammer and punch, To fit the new one insert the stud and then put a large nut over the thread, then fit the lug nut and tighten it to pull the stud into the hub, then simply remove the lug nut and put it all back together.

Jan 18, 2012 | Honda Accord Cars & Trucks

1 Answer

How can i remove the driver seat of my '91 honda accord ex?


slide the seat all the way forward,, you will see the back 2 bolts,, then all the way back to see the front two

May 04, 2011 | 1991 Honda Accord

2 Answers

I have a 91 Honda Accord EX the drivers side window will not go up or down all the other windows are working


Check the fuses, if they are all good then change the window motor on that one door!

Jan 10, 2011 | 1991 Honda Accord

1 Answer

How to remove front discs on 1991 honda accord


Loosen the lug nuts, then Raise and safely support the vehicle on jack stands.

Remove the wheels

Remove the steering knuckle from the vehicle.

Remove the 4 bolts retaining the hub unit to the steering knuckle and remove the hub unit.

Remove the 4 bolts retaining the hub unit to the steering knuckle and remove the hub unit/rotor assembly

Remove the 4 bolts, then separate the hub unit from the brake rotor
6e199b7.jpg

To install:
1. Assemble the disc to the hub unit and tighten the bolts to 40 ft. lbs. (55 Nm).
2. Install the steering knuckle.
3. Lower the vehicle and check for proper brake operation.

Jun 15, 2010 | 1991 Honda Accord

3 Answers

I have sheared a front wheel lug on my 1995 landcruiser Amazon. Friends had a puncture and didn,t tighten wheel nuts properly on spare. How do I replace.


The lug nuts are press fitted in the rotor. You should be able to hit the bolt with a hammer(or hammer and punch if the bolt is sheered flush with the rotor) and it should come out.

Jan 17, 2010 | 1995 Toyota Land Cruiser

1 Answer

91 honda cccord ex


my sister car had the same prob, It turns out that it was a loose accelorator bolt

Jun 06, 2009 | 1991 Honda Accord

1 Answer

How to remove a shift knob on a 91 honda acoord ex


theres screws on the back of the shift knob where you hand goes

Mar 11, 2009 | 1991 Honda Accord

1 Answer

1990 honda accord lug nut studs broke


Studs have to be hammered out through the back of the hub, and the new ones have to be hammered in.

Dec 17, 2008 | 1992 Honda Accord

1 Answer

91 accord alt belt


  1. Apply a force of 100 N (10 kg, 22 lbs) and measure the deflection between the alternator and crankshaft pulley. Deflection: 10 - 12 mm (0.39 - 0.47 in)
NOTE:
  • On a brand-new belt, the deflection should be 4.5 - 7 mm (0.18 - 0.28 in) when first measured.
  • If there are cracks or any damage evident on the belt, replace it with a new one.
    1. Loosen the through bolt and adjustment locknut.
    2. Turn the adjusting bolt to obtain the proper belt tension, then retighten the nut and mounting bolt.
    3. Recheck the belt deflection.

May 28, 2008 | 1991 Honda Accord

Not finding what you are looking for?
1991 Honda Accord Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...