Question about 1992 Oldsmobile Cutlass Ciera

1 Answer

My brakes dont work the rubber hose is leaking in the back/92 olds cutlessciera how do i fix my brake line and the pipes

Posted by on


1 Answer

The rubber hose you buy at the auto parts store.
If you have rusted and leaking hard lines,they also have them. But you have to cut,bend and flair,the ends yourself. No other way .

Posted on May 15, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2000 ford expedition brake line on the frame

No. Rubber brake hose are high pressure hoses meant for brake lines. Substituting any other hose would lead to disaster

Aug 28, 2014 | Cars & Trucks

1 Answer

I replaced the caliper and the line is still leaking how to stop it from leaking

If it is the rubber line attaching to the caliper, you need to replace the short rubber hose. The hoses do wear out over time from all the flexing stress involved. All parts stores sell them.
If the leak is from a steel line, that section of line will have to be replaced. Not likely any GM dealer would still carry a parts line for a discontinued Cutlass, nor would any parts store ever carry brake line sections (except for the rubber hoses). One could find the same section from a salvage yard, or have a shop construct the broken section from brake line tubing, with proper fittings at each end.
In most cases, it is the rubber brake hose that develops leaks. So, back to the parts store. When replaced, the brakes will have to be bled, to get trapped air out of the brake lines.

Feb 15, 2014 | Oldsmobile Cutlass Ciera Cars & Trucks

1 Answer

My brakes are almost to the floor and the emergency brake light was on intil i put fluid but it is leaking the brake fluid back out i can it leaking behind the tire the leak is on the front passanger side...

Not a sealant, but a rubber hose in the brake line going to the tire. If the hose is ruptured, and it probably is, the fluid will leak out. Take the wheel off to see. The hose will need replacing, then the brakes will need bleeding to get all air out of the lines.

Nov 30, 2013 | Cars & Trucks

2 Answers

No heat when on floor vents but good on defrost

Look for missing, or damaged vacuum lines, your system is designed to fail in the defrost mode.

Mar 04, 2011 | 1998 Dodge Ram 1500 4WD

3 Answers

The brake fluide is leaking I have filled up 3 time in 7 day how can I fix it

Look where the fluid is coming from under the car if it is in front of the car it is a front brake line issue these are easy to fix. look at the brake hoses on the left front and right front behind the tire these usually these lines dryrot and leak. the front steel brack line will usaully brake where they are mounted on the car body. If your brake line is leaking from the drivers door back it is a rear brake there is a single brake line that goes to the back and splits into two lines there is another rubber hose by where they split. you can fix brake lines with new steel line and compression fittings where you slide on and tighten the front is 1/8 size line and the back brakes are 3/16.

Mar 01, 2011 | 1993 Buick Park Avenue

1 Answer

, apower brakes have no pressure when pedal pushed, no brake line leaks, pushes hard when engine turned off acts like power assist is leaking thru

I would check the medium sized rubber hose that goes to the brake booster from the inlet manifold as it can swell internally and prevent vacuum getting to the power booster. Replace if necessary. I would also check all those pesky little rubber vacuum hoses that are used for pollution control. They tend to go hard and split where they connect to the metal piping if they are over 10 years old, allowing air / vacuum leaks into the inlet manifold. It could also mean that the rubber diaphragm inside the brake booster has developed a leak and causing loss of power assistance.

Sep 21, 2010 | 1992 Buick Roadmaster

4 Answers

I believe my brake fluid leaked out of a 24 year old rubber hose

should be one line going to the back and then it tee's,somewhere by the rearend,if the lines are all rusty,should replace them,make sure that its not the master cylinder.if you look underneath it,they leak from the bottom and run down the firewall or the fluid travels down one of the lines and drips somewhere else,brake lines are solid steel tubing with flare ends on them,they come in multiple lengths,they are straight sticks,you have to bend them according to the old line that you replace,the only rubber lines are the high pressure front caliper hoses,the lines are fairly resonable(local parts store)but a pain in the **** to bend and install,also if the insides of your back tires have brake fluid on them your wheel cylinders are leaking,good luck,hope this helps,aloha from maui todd0708

Oct 26, 2009 | 1985 Chevrolet Monte Carlo

1 Answer

Ruptured brake line

unless modifications were made to the factory settings then you can go to any parts store ad buy a brake line. there is a hard metal line that runs from the master cylinder to the back of the car and then there is a rubber hose that connects the hardline to the brake system. that is all you will have to replace.

remove the tire and check and see, you may be able to see it by jacking up the car and crawling under it. all you need is a wrench and a new hose, you will have to bleed your brakes after replacing the hose.

Oct 21, 2009 | 1985 Oldsmobile Delta 88

2 Answers

Leaking brake line

probably not the lines are usually attached to the frame rail behind the tank.

Aug 25, 2008 | 1999 Dodge Durango

1 Answer


is the brake pedal soft or go to the floor? you could have a rusted out or pinched metal brake line, or the rubber brake hose could be clogged, you must trace the hose and metal line back to the master and look for leaks or rust, then unscrew the line from the master and make sure you get fluid there while depressing the pedal, and just keep disconnecting down the line until you get fluid to the caliper be sure your bleeder screw is not just clogged with rust remove it all the way and depress the pedal to see if you have fluid there please rate -jeff

Jul 28, 2008 | 1998 Buick Century

Not finding what you are looking for?
1992 Oldsmobile Cutlass Ciera Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides