Question about 1991 Chevrolet S-10 Blazer

2 Answers

Lost the key to the back glass and door of my 91 s10 blazer. How do i unlock it from the inside?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

From the inside you can pull down the plastic molding around the lock and see the locking mechanism. You can push down on one side of the "pincher like" lock and it will unlock. I don't have a key to the back and to keep it from locking I put some duct tape around the bar to keep the locking mechanism from clamping down when it gets slammed.

Posted on Jun 13, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 76,846 Answers

U will need to remove the trim panel and use the lock release rods to unlatch the door.

Posted on May 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Rear glass will not open. push button and makes


2000 Chevy Blazer 4 door with pop up glass and drop down gate. I experienced this exact problem 4 years ago. The glass unlock actuator inside the drop down hatch has a small plastic piece connect to it. This piece pushes the glass unlock mechanism. In order to temporarily unlock, you must pull the carpeting piece down and located in the center is an access hole where your can depress the unlock mechanism from inside, until you find a replacement piece. I recommend the pick and pull lots where you can find a similar make and model blazer with the drop down gate. I was able to get the piece and actuator (just in case) for $5. You will have to disassemble the gate in order to replace the plastic piece which is easily removed from the actuator, but cannot be fixed with glue, even with crazy glue. Have a excellent day and pass it on!

Apr 18, 2010 | 2000 Chevrolet Blazer

1 Answer

I need diagram for firing order on a 91 s10 blazer 4.3 2wd


For the 1991 Chevrolet S10 Blazer 4.3 V6, Both: 2WD AND 4WD:

Firing Order:

1-6-5-4-3-2

Cylinders:
.......(
back).......
|..6..|.......|..5..|
|..4..|.......|..3..|
|..2..|.......|..1..|
......(front)

Distributor:
....(back)
(+).4...3
5...........2
..6...1..(+)-screw
.....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 12, 2010 | 1991 Chevrolet S-10

1 Answer

95 S10 blazer 4dr power door locks inop, new battery installed in remote, all fuses good, still inop?


1. Locate the red two wired programming connector located near the central locking control module that is located behind LH Lower instrument panel. Drop the panel and you will see the red programming connector that is not connected to anything.
2. Inside the Red programming connector you will see to pins..
Jump two pins with a section of wire.
3. System should now lock and unlock doors to indicate vehicle has entered programming mode.
4. Press any button on keyless remote once. System should now lock and unlock doors indicating the keyless remote has been programmed.
5. Repeat step 4 to program other remote.
6. Remove jumper wire from programming connector to exit programming mode.
7. Test Remote(s)

Dec 22, 2009 | 1995 Chevrolet Blazer

1 Answer

2002 chey blazer back glass hatch will not open. The electric switch on dash board and tail gate dosn't work. and has no key hole. Any ideals.


I had this "problem" for a minute till I realized the hatch button will not pop until you UNLOCK the car doors. Hit the remote UNLOCK button and THEN push the hatch button. I hope this helps you !!

Oct 22, 2009 | 2002 Chevrolet Blazer

1 Answer

91 chevrolet s10 blazer heater core access?


not really. IT is under the dash on the passenger side. You should put some plastic down or pull the carpet or it will get soaked with anti freeze

Oct 01, 2009 | 1991 Chevrolet S-10

1 Answer

Reprogram keyless entry


It took me a few attempts to program a new keyless remote for my 2002 Chevy Blazer.
Insert key into ignition but don' turn it yet. While holding down the UNLOCK switch on the door, the trick is to cycle the ignition ON OFF ON OFF as quickly as possible then release the UNLOCK switch. If done correctly the door locks will cycle 1x to acknowledge. Then hold both the unlock and lock buttons down on the remote for about 15 seconds. The locks should cycle again to confirm...Hope this helps.

Mar 19, 2009 | 2002 Chevrolet Blazer

1 Answer

Driver side window off track


From what you discribe I will guess this is a s10 blazer, as on this smaller blazer the glass is held into the tracks by clips the attach through very small holes. 1 on the top back edge and 1 on the front lower edge. These clips you can get from the dealer or just go by and autoglass shop.

Jul 08, 2008 | 1987 Chevrolet Blazer

Not finding what you are looking for?
1991 Chevrolet S-10 Blazer Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...