Question about 2006 Pontiac G6

1 Answer

How do I change the low beam bulb on My G6 - 2006 Pontiac G6

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 175 Answers

Remove headlight assembly (remove top three fasteners and pull assemble straight forward (firmly) unhook harness do not touch glass of replacement bulb

Posted on Feb 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spare fuse number for headlights on 2007 g6


There are four 10A fuses: LH LOW (beam) FUSE 7; LH HI BEAM FUSE 11; RH LOW BEAM FUSE 9; and RH HI BEAM FUSE 12. The fuses are located in the underhood fuse block.

Sep 09, 2016 | 2007 Pontiac G6

1 Answer

Pontiac G6 right low beam headlight not working even after I replaced the bulb, both high beam lights work just fine, any ideas?


Make sure that the wire that connected to G6 right low beam is undamaged....and the bulb that u bought is compatible with you G6.

Oct 11, 2014 | Cars & Trucks

1 Answer

Low beam on drivers side will not work. 2008 g6. I replaced the bulb and the fuse,low beam will still not come on.


it is possible that the socket itself has been melted and is unable to make contact, it happened to mine. and i just replaced the socket

Nov 02, 2013 | 2006 Pontiac G6

1 Answer

Low beam headlight won't work with a new bulb


Remove the affected headlight and replace the headlight socket on the wiring harness. I've had to do this for both headlights. It's a design flaw by GM and cheap parts. The connectors are not insulated and oxidize. You have to place them with aftermarket ones. Simply pull out the wiring harness and snip the wires, use electrical wire twists to connect the new socket. Reessemble and you'll be good.

Feb 22, 2013 | 2009 Pontiac G6

2 Answers

2008 gmc truck Low beams quit working. I have High beams and running lights only. whats possible fix?


Are the bulbs good?

If your low and high beams are on the same bulb, then the low beam elements have blown even though the high beam still works, you need two new bulbs.

Apr 04, 2011 | 2008 GMC Sierra 1500 2WD

1 Answer

Low beam burnt out


The headlight on an 03 baja are a double element bulb for high an low beam. I replaced mine with 9007 bulb from auto parts store. Be careful to pay attention to bulb position, they can be installed up side down having the high beam as your low beam. I would shine the lights up against a wall or garage door and flip your high and low beams on and off to see how the shine.

Feb 21, 2010 | 2003 Subaru Baja

1 Answer

How to change front headlamp bulb? Low beam


  1. Open the hood.
  2. Remove Grille.
  3. Remove the 2 retainers on back of headlamp assembly and remove the headlamp from the sheet metal panel.
  4. Remove the access cover from the rear of the headlamp.
  5. Disconnect the electrical connector from the socket.
  6. Rotate the bulb and socket counter clockwise in order to remove the bulb and socket from the housing.
  7. Disconnect the electrical connector from the socket.
  8. Remove the bulb and socket from the headlamp.
Installation Procedure Important: • Replace a high beam bulb with another high beam bulb. The high beam bulb has a black socket. • Replace a low beam bulb with another low beam bulb. The low beam bulb has a gray tip and a grey socket.

Oct 14, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

2008 gmc acadia low beam light bulb changing


how do you change the low beam light bulb on the 2008 gmc acadia

Feb 24, 2009 | 2007 GMC Acadia SLE

Not finding what you are looking for?
2006 Pontiac G6 Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...