Question about 2007 Ford GT

1 Answer

My key remote to lock the doors suddenly stopped

My key remote for ford galaxy 2007 to lock the doors suddenly stopped working i replace the battery but still not working think it need recoded how do you do this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,675 Answers

Hi yes this can be done, here is how
make sure you have all keys ready to reprogram close all windows and doors insert key into drivers door lock within 5 seconds of putting key in door lock turn key to unlock position 3 times this puts the key into programming mode ( door led should be on ) press and hold lock button, within 5 seconds of holding lock button press unlock button 3 times ( keeping lock button pressed at same time) then release lock button that should be it...to make sure correct programming is achieved key led flashes 5 times, and door led flashes 6 time, if you have more than one key do same as above within 15 seconds of doing the first key..
phew..lol, well i hope that will work for you..please vote thanks

Posted on May 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan primera 1996 immobiliser work, not locking door


Check and replace the battery in the key

Apr 28, 2013 | Cars & Trucks

1 Answer

Vauxhall Astra's remote suddenly stopped working.


Start troubleshooting by redoing the "mechanic's" work, making sure that the correct and unblown fuses are in the correct places.

May 13, 2017 | Cars & Trucks

1 Answer

How do you re-program the security code on a 2007


FORD KEY PADS
  • Enter permanent factory code
  • Press the 1/2 button within 5 seconds to enter programming mode
  • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed. (MAYBE)
KEY PADS/REMOTES
  • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
  • Press any button on new remote, doors will lock, unlock to verify
  • Do the previous step with the second remote, doors will lock unlock to verify.
  • Turn ignition off. Doors will again lock, unlock to verify.
NOTE-Some vehicles use 5 turns of the key instead of 8

Jun 05, 2010 | 2007 Ford Explorer Eddie Bauer

1 Answer

Remote locking/unlocking device suddenly stopped working - battery change did Not fix the problem Is this a wiring issue? and if so where do I look? Car is a Ford Escape


take it to auto zone they will test if its still good if it is u may need to replace the battery on the romote or reprogram it to ur vechicle if needed to reprograming look at the thing were they connect the computer under the dash on the driver side then connect a wire from the 4th port and the 8th port the doors will lock and unlock signaling that the remote is ready to program then hold the lock key for 15 sec and your done

Apr 15, 2010 | 2005 Ford Escape

1 Answer

My 05 Equinox drivers electronic door lock doesn't work with the remote only locks/unlocks with the key. All the other door locks work.


YOUR REMOTE BATTERY NEEDS REPLACING.TAKE IT TO DEALERSHIP.THEY WILL REPLACE REMOTE ENTRY BATTERIES AND REPROGRAM THE DOOR LOCKS.

Jan 18, 2010 | 2007 Chevrolet Equinox LS New Cars

2 Answers

Ford F150 remote key does not work after car battery


cbridges2232,

Any luck with your keyless remote issue? I'm having the exact same problem with my Ford F150 CrewCab after car battery replacement.

Oct 07, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Remote key fob suddenly stopped work


Check out page 57 of the manual:

http://www.motorcraftservice.com/pubs/content/~WO6FOC/~MUS~LEN/41/06focog4e.pdf

If that doesn't work, it sounds like a trip to the dealer.

May 02, 2009 | 2006 Ford Focus

6 Answers

Keyless entry stopped working on 05 cobalt now i have to unlock door with the key and when i do that the alarm goes off. Help


Lock all the doors from the inside (with all the doors closed), unlock your driver's door by manually lifting the lock, then press it back down after you are out - this will prevent the alarm from sounding when you use the key to unlock the door.

Aug 02, 2008 | 2007 Chevrolet Cobalt Coupe

Not finding what you are looking for?

Open Questions:

2007 Ford GT Logo

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...