Question about 2001 Toyota Sequoia

Open Question

How to replace lights in multi information display

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
freetek
  • 5568 Answers

SOURCE: multi-information display is blank

If you really plan on chasing this one down as a DIY project, you will need electrical diagrams from your car. You can find these and a whole lot of other information here:
Haynes Avalon service manual
Even if you don't care to do your own maintenance, you can get an idea of the potential cost of a repair by looking into the complexity of it before committing to a sky-high repair bill.
We have a Haynes in each of three vehicles and they have saved us time and money.

Posted on Jul 19, 2010

Ad
xthirdimpact
  • 13 Answers

SOURCE: I have a 2007 4Runner,

http://www.toyota120.com/html/center_console_lights.html

Good luck!

Posted on Sep 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Multi- information display language change


Press the "setup" button on the radio and scroll through the setting until you get to language settings, select the desired language and your set.

Dec 01, 2013 | 2007 Toyota Camry

1 Answer

Half of my multi-information display won't light up and the center set of a/c buttons won't light up either. How would I go about fixing this? Thanks!


Those are LED lights that can be replaced, but do NOT go to the dealer! They'll try to get you to replace the entire cluster.

There's a way you can take care of this, if youre handy.

Here's a link on how to access the lights:

http://www.toyota120.com/html/center_console_lights.html

To replace a bulb, you'll have to cut n re-solder an LED that you can pick up at Radio Shack.

Aug 16, 2011 | 2003 Toyota 4Runner

1 Answer

Hi i have a 2001 prius it has the check engine , triangular warning light both on in the instrument cluster. it also has the car exclamation point light on in the multi-information display. they came...


Go to an auto parts store and they will run a diagnostic test for you for free. It may be that the gas cap needs to be replaced. That was the case on my 2002 Toyota Avalon when the check engine light stayed on.

Jul 29, 2011 | 2001 Toyota Prius

1 Answer

Multi-information display is blank


If you really plan on chasing this one down as a DIY project, you will need electrical diagrams from your car. You can find these and a whole lot of other information here:
Haynes Avalon service manual
Even if you don't care to do your own maintenance, you can get an idea of the potential cost of a repair by looking into the complexity of it before committing to a sky-high repair bill.
We have a Haynes in each of three vehicles and they have saved us time and money.

Jul 19, 2010 | 2003 Toyota Avalon

1 Answer

Multi-Information Display unit not working


hi,
I have Toyota Avensis 2005 model. I have a problem with Multi information Display unit. It does not turn off even after switching off the car. The display unit is stuck with a figure. Please help me in fixing this and resetting the unit.
I tried long pressing the ENT button and all the range buttons, but no use - also changed the ODO display.
Thanks,
Raksha.

Apr 15, 2009 | 2005 Toyota Corolla

1 Answer

How to reset the maintenance light in toyota camery


Oil Change Reset Procedure


  1. Turn the "ENGINE START STOP" or engine switch OFF with trip meter A reading shown.
  2. While pressing the trip meter reset button, turn the "ENGINE START STOP" switch or engine switch ON.
Without multi-information display


  1. Continue to press and hold the knob until the trip meter displays 000000.
With multi-information display


  1. Continue to press and hold the knob until "COMPLETE" appears on the multi-information display.

Apr 03, 2009 | 2009 Toyota Camry

5 Answers

Reset oil maintenance light in 2008 toyota highlander


  1. Set the "ENGINE START STOP" or engine switch OFF with the trip meter A reading shown.
  2. While pressing the trip meter reset button, set the "ENGINE START STOP" switch or engine switch ON.
Without multi-information display

  1. Continue to press and hold the button until the trip meter displays 000000.
With multi-information display

  1. Continue to press and hold the button until "COMPLETE" appears on the multi-information display.
there you go jimmy mark as fixya

Sep 26, 2008 | 2008 Toyota Highlander

Not finding what you are looking for?
2001 Toyota Sequoia Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...