Question about Chevrolet Silverado 1500

1 Answer

I have a 2008 chevy Silverado 4X4. There is a clunking noise coming from the rear whenever i start moving or when i let up on the brakes. I took it to thye dealer and they told me that this was normal for this vehicle.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! If they told you that its normal for the vehicle to produce a noise well i doubt. Of course its not normal and that will be annoying. But I believe that there are parts that needs to be checked and replaced. One of these are the suspension bushings (when worn it can really make a noise), rear brake calipers (may be worn and may need replacement, can produce sound after brakes are released) and check for "maybe" loosen bolts or nuts that needs to be tighten. Hope this helps and good luck!

Posted on May 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Chevy Silverado is making a clunking noise, on and off sometime over bumps. Also a deep grinding type noise in the same location while driving not constant


Hello Karla,

It sounds like you may have a bearing or CV joint going out. Your vehicle will need to be jacked up and inspected. It may be more than one problem too. Its possible the dragging noise could be something between brake pads and rotor, but the grinding that comes and goes in reference to direction sounds like a bearing or joint. I would take it to a professional right away and ask for an estimate only, and then get other estimates from other shops as well. Good luck to you.

Nov 25, 2013 | 2003 Chevrolet Silverado 1500

2 Answers

Clunk at rear when starting from braking


clunk noise when coming to a stop could be driveshaft slip yoke binding.clean lubricate driveshaft slip yoke or slip yoke bearings could be worn.

Oct 19, 2012 | 2008 Chevrolet Trailblazer

1 Answer

Will clunk hard when accelerating slowly, and then


Is the clunk noticed as soon as the brake pedal is released? Your brake shoes engage in the rear drum when the brake pedal is pressed and then release as the brake pedal is released. Your shoes may be worn and might be "hanging up" for a brief period, that would make a clunk sound your describing

Feb 16, 2010 | 2004 Chevrolet Silverado

1 Answer

Clunking popping noise from rear end when tires


the gears in your rear end are probably chipped and broke or need shims

Oct 25, 2009 | 2002 Chevrolet Silverado

2 Answers

2002 Chevy Silverado clunking noice when shift from 2wd to 4hi


It is somewhat Normal Depending on how Loud the Clunking is. This is a Common Complaint on the Chevy 4x4's. I have verified this through the Dealerships here in Oklahoma and they all say the Same thing But, I am with you, They should go into 4x4 without that Clunk for as much as we pay for them.

Jan 26, 2009 | 2002 Chevrolet Silverado 2500HD

5 Answers

Rear end clunk in Chevrolet Silverado 1500 pickup


The noise is caused by the axle button being worn out, this lets the axle move back and forth and clunk, this is a unique problem with C clip retained axles, it is a noise issue but will not fail and cause any more damage, in order to fix it you must have the axles pulled and the diff carrier checked for excess wear where the axle retainning C clip rides, if the carrier is ok then replace the axles.

Nov 24, 2008 | 2000 Chevrolet Silverado 1500

2 Answers

Clunk noise from rear of truck


How about the U joint? If it's shot, you will hear a clunk when u start up. You probably already know, but jack up the back of the truck (both wheels off the ground) make sure u blocked front wheels front and back so it can't roll, use jack stands so u don't get squished, truck in neutral, e- brake off, climb under, grab driveshaft and twist back and forth to see if there is slop or play in the rear universal joint. Let me know what u find. Good Luck, and don't get squished (or squashed). countrycurt0

Sep 30, 2008 | 2004 GMC Sierra 1500 Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...