Question about 1999 GMC Sierra

1 Answer

How to reset oil change light?

I changed my. How do I reset the change oil light? I do not have an owners manual.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 17,970 Answers

Make and Model: Chevrolet Suburban, GMC Yukon XL, Chevrolet Silverado, GMC Trucks Sierra
Years: 2000-01, 1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.

Hope this help (remember rated and comment this help) Good luck.

Posted on May 14, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Resetting the oil change monitor in the information centre after an oil change

Bring up the oil screen, keep pressing the button until the numbers reset to zero.

Posted on Dec 28, 2008

  • 78 Answers

SOURCE: how do i get my change oil light to go out i dont have owners

turn the key on engine off hit the acclerator three times to the floor let off and the oil light will start flashing shut the key off while flashing then turn back on this should reset it

Posted on Dec 30, 2008

mcgyver468
  • 710 Answers

SOURCE: Resetting my car

It is real easy. Turn the key to the on position without starting the car.(lights on dashboard), Push on the accelerator 3 times within 5 seconds. That's it. If you are unsure, then try it twice. Good luck. Keep me posted.

Posted on Apr 27, 2009

greg_margo
  • 1959 Answers

SOURCE: how to reset oil light after oil change on 2005 trailblazer

  1. Turn the key to the "ON" position
  2. Press the accelerator all the way to the floor 3 times within 5 seconds
  3. You should see the oil light flash, once it stops flashing, turn the key off
  4. Wait 10 seconds before starting the vehicle, the oil light should now be reset
  5. If this doesn't reset the light, repeat steps 1-4 paying careful attention to pressing accelerator all the way to the floor 3 times within 5 seconds
Best of luck.
Greg

Posted on Aug 10, 2009

  • 335 Answers

SOURCE: reset change oil light

hello, here is the instructions on how to reset the light

When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A CHANGE ENGINE OIL SOON message will come on. Change the engine oil as soon as possible within the next 600 miles (1000 km). It is possible that, if driving under the best conditions, the oil life may not indicate that an oil change is necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset.
If the system is ever reset accidentally, change the engine oil at 3000 miles (5000 km) since last oil change.
To reset the Engine Oil Life System, do the following:

  1. Turn the ignition to ON, with the engine off.
  2. Slowly fully press and release the accelerator pedal 3 times within 5 seconds.
  3. The reset is complete when the chimes sound and the CHANGE OIL lamp goes out. If the lamp stays on and no chime is heard, repeat the reset procedure.
  4. Turn the key to OFF.
If the CHANGE OIL lamp comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

Posted on Jun 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 2001 bettle changed oil and now oil light comes on but is blue


I assume that it is the oil change hasn't been reset, or the oil pressure is still a bit low. Find the owners manual. Online or dealer...

Feb 14, 2015 | Volkswagen Beetle Cars & Trucks

1 Answer

2012 Nissan Altima Oil light reset


Look in the owners manual and it will tell you how.

Nov 07, 2013 | Cars & Trucks

1 Answer

After oil change the warning light ( Oil change required ) still ON


You need to reset it manually after you change the oil. If you have the owners manual it will explain how to do this. If you don't have it you get get a PDF version online at ford.com.

2006 Ford Explorer owners manual.

Essentially you need to scroll through the message center until system scan appears. enter it and a message will come up oil life press reset if new or oil life hold reset if new. Follow those instruction and the oil life will eventually change to 100%.

Jan 06, 2011 | 2006 Ford Explorer

2 Answers

This probably sounds stupid - but we just bought this car and there is no owners manual - we changed the oil and the light is still lit up. How do you turn off the change oil light? Thank You


TELL ME WHAT YEAR MODEL CAR TYPE.I WILL TELL YOU.THERE ARE TWO DIFFERENT WAYS TURN OFF OIL LIGHT NEED TO KNOW WHAT TYPE OF CAR YOU OWN.

Jun 10, 2010 | 1999 Oldsmobile Alero

2 Answers

Oil maintenece light is on. Oil level is good. Could a clogged filter make this light go on?


This should only be indicating time for an oil change. Now, if the red, check engine light comes on, then you have an oil/engine problem.

Possibly the maintenance light wasn't reset when the last change was done. If you don't have the owners manual to check, I found a referenced method (below) to reset it through AMSOIL synthetic oil products. Good Luck

To reset Engine Oil light. Turn the ignition key to RUN with the engine off. Fully press and release the accelerator pedal three times within five seconds. If the Change Engine Oil light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off. If the light comes on again and stays on for 30 seconds at the next ignition cycle, it did not reset. You will need to reset the system again.

Feb 09, 2010 | Saturn L-Series Cars & Trucks

1 Answer

Does oil light need reset after changeing oil


Check with owners manual to see if this code indicates a change oil or low oil pressure. To be sure, check engine oil level before starting vehicle. If this is a change oil indicator, the owners manual will give the steps required to clear.

Dec 02, 2009 | 2002 Jeep Liberty

3 Answers

Change oil light came on


In your owners manual there is a procedure listed for resetting thr oil change reminder/maintenance light. Some vehicles you turn key on..do not start it.. step on gas pedal all the way to the floor 3 times... then key off. others haver u hold the trip odometer reset button when u turn key on.
It varies from manufacture to manufacturer.

Jul 10, 2009 | 2006 Isuzu Ascender

2 Answers

2006 ford exsplorer oil light did not go off after a oil change.


In the owners manual, you will find reset procedures.

I found this for ya, hope it helps!

Please Rate!

Oil Change Reset
A press of the OIL CHANGE RESET switch will allow you to
reset the oil life feature to 100% (or your Personalized Oil Reset
Percentage). After you have the oil changed, you must execute
the following procedure. Press the OIL CHANGE RESET switch
and hold for five seconds as the M/C counts down for five
seconds. After a successful reset the Message Center will display
“OIL LIFE RESET TO 100%.” If you have established a
Personalized Oil Reset Percentage, the display will show that
percentage instead of 100%. To ensure accurate oil life
indicators, perform this reset procedure only after an oil change.
Your Personalized Oil Reset Percentage allows you to establish a
smaller oil change interval than the manufacturer’s
recommended interval. To establish your Personalized Oil Reset
Percentage perform the following procedure:
1. Press and hold the OIL CHANGE RESET switch and press
the RESET switch while the display is still counting down
the 5 seconds to reset. The display will change to “START
OIL LIFE AT XXX%.”
2. Press the OIL CHANGE RESET switch until the displayed
percentage is the Personalized Oil Reset Percentage that you
desire. Your choices are 100%, 90%, 80%, 70%, 60%, 50%,
40% and 30%.

Mar 03, 2009 | 2006 Ford Explorer

1 Answer

Oil change


You have to reset the light according to the owner's manual.

If you don't have the owner's manual, try this:

Turn the ignition ON.

Press and hold the Trip/Reset button on the instrument panel for 12 seconds.

The light should flash and then go out. The system is reset.

If that doesn't work, comment back.

Nov 09, 2008 | 2002 Chevrolet Avalanche

Not finding what you are looking for?
1999 GMC Sierra Logo

701 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...