Question about Jeep Grand Cherokee

1 Answer

I have a problem getting the serpentine belt back on it doesnt want to make it all the way to get back on the tensioner..... just replaced the water pump and now it doesnt want to go all the way any suggestions

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 343 Answers

Try leaving the alternator pulley for last instead of the tensioner. also be sure that you are releasing the tension completely. A little movement from the tensioner will help a lot more than one would think.

Posted on May 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a serpentine belt on a nissan 2007 2.5 s altima


Video Tutorial:
https://youtu.be/h4qGOJ5PpSw

The easiest way to replace serpentine \ drive V belt on 2007-2012 Nissan Altima 2.5L 4 cylinders engine:
- remove front wheel on passenger side
- remove plastic splash cover
- user 14mm offset wrench to turn belt auto-tensioner in clockwise direction
- block auto-tensioner from moving using locking mechanism right above the auto-tensioner pulley
- slide the belt off the smooth non-grooved water pump pulley first
and then take the belt completely out
- when installing a new serpentine belt, first hook it onto all pulleys except for water pump pulley. Hook it onto the water pump pulley last
- make sure the new belt is hooked up properly onto all of the pulleys
- unlock the auto-tensioner
Original OEM Part #:
Amazon com OEM 11720 JA00B Nissan Altima Serpentine Belt
Follow this diagram to route the new belt on 2.5L engine:

replace-serpentine-belt-nissan-2007-2-5-02rhvdv200sh3oinuqbnuvnv-2-2.png

Jan 04, 2013 | 2007 Nissan Sentra 2.0 SL Sedan

1 Answer

Serpentine belt


Application:
With A/C


2.image

Kia_Sedona_2002-2006
Accessory Drive Belts

Print


Accessory Belt Routing



0996b43f802319a9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Accessory serpentine belt routing-3.5L engine


0996b43f802319a9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Accessory serpentine belt routing-3.5L engine


0996b43f8020700d.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Accessory serpentine belt (A) routing-3.8L engine


Inspection

Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.


Removal & Installation

  1. Disconnect the negative battery cable.
  2. Rotate the auto tensioner clockwise to release tension, then remove the drive belt.

To install:
  1. Install drive belt (A). Route the belt over the components in the following order: Crankshaft pulley - A/C pulley - idler pulley - generator pulley - water pump pulley - P/S pump pulley - tensioner pulley.
  2. Rotate auto tensioner arm in the counter-clockwise moving auto tensioner pulley bolt with wrench.
  3. After putting belt on auto tensioner pulley, release the auto tensioner pulley slowly.

    0996b43f802319a9.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Accessory serpentine belt routing-3.5L engine


    0996b43f8020700d.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Accessory serpentine belt (A) routing-3.8L engine


May 09, 2012 | 2006 Kia Sedona 3.8

1 Answer

I am trying to replace the water pump om my 1995 Mercedes C220 (Not a C230) How do I get the tensioner pulley to release the tension off the water pump pulley and serpentine belt so I can remove the fan...


TRY USING A BOX END WRENCH OR A SOCKET AND WRENCN TURN TENSIONER CENTER BOLT COUNTERCLOCK WISE TO UNLOAD TENSION WHILE SLIP BELT OFF THE ALTERNATOR.THAT WAY BELT WILL BE OUT THE WAY UNTIL YOU REPLACE WATER PUMP.WHEN DONE TURN TENSIONER CLOCKWISE WHILE SLIP DRIVE BELT BACK OVER THE ALTERNATOR.

Feb 19, 2011 | Mercedes-Benz C230 Cars & Trucks

1 Answer

How do i loosing up the tension belt's to replace the water pump??


serpentine belt drive or conventional serpentine uses a tensioner pully on the side if it it has a 3/8 or 1/2 drive opening for a socket put it in a pullaway from the direction its tensioning and slip it off. old school belts loosen the alternator adjustment and back the alt looseng nut by slide and the 14mm under it that brackets it down.

Nov 24, 2009 | 1991 Honda Accord

1 Answer

Serpentine belt replacement


You will only need to locate the fan belt diagram to replace it on correctly and a 1/2 breaker bar or ratchet to back off the tension er while replacing belts check the tension-er bearing if it feels ruff when you turn it replace it. Check water pump also to see if it turns smooth same with the alt.

Jul 05, 2009 | Pontiac Grand Prix Cars & Trucks

2 Answers

Describe your 2005 Chevrolet Optra Problem How to change serpentine belt tensioner?


Remove the air filter housing and air hose. Set aside
Pull the 15mm bolt on the tensioner counterclockwise (towards front of car) and hold it there to loosen tension, and remove the serpentine belt.
With your 15mm wrench, unbolt the belt tensioner and remove.
Replace with new tensioner
Put serpentine belt back on.
Very easy! Be careful when releasing tension, becase if you let go of the wrench it will fly back and could hurt you.

Jun 09, 2009 | 2005 Chevrolet Aveo

1 Answer

Cant find 97 ford taurus serpentine belt diagram


Drive Belt Replacement ani_caut.gif WARNING: IF EQUIPPED, DO NOT ALLOW DRIVE BELT TENSIONER (6B209) TO SNAP BACK AS DAMAGE TO DRIVE BELT TENSIONER OR PERSONAL INJURY COULD RESULT.
NOTE: Minor cracks in the V-grooved portion of the serpentine drive belt (8620) are considered normal and acceptable. If the drive belt has chunks missing from the ribs, the drive belt should be replaced.

NOTE: Conditions requiring drive belt replacement are excessive wear, rib chunk-out, severe glazing, frayed cords or other conditions. Replace any drive belt exhibiting any of these conditions.

NOTE: When installing drive belt on pulley, make sure that all V-grooves make proper contact with pulleys.



q1834c.gif

Drive Belt, Serpentine—Except SHO
Removal
  1. ani_caut.gif WARNING: USE CAUTION WHEN REMOVING OR INSTALLING DRIVE BELT TO MAKE SURE THAT TOOL DOES NOT SLIP FROM DRIVE BELT TENSIONER OR PERSONAL INJURY AND/OR DAMAGE TO DRIVE BELT TENSIONER AND DRIVE BELT MAY OCCUR.
    Using a 15 mm socket or wrench on bolt attaching drive belt tensioner pulley, rotate drive belt tensioner clockwise on 3.0L (2V) and 3.0L (2V) FF, rotate the drive belt tensioner counter clockwise on 3.0L (4V) to remove drive belt from pulleys. Make sure spring keeper engages into slot.


    Drive Belt Tensioner—3.0L (4V)


    q3759a.gif

Installation
  1. Install drive belt over all pulleys (except drive belt tensioner).
  1. Rotate drive belt tensioner as described under the removal procedure and install drive belt over drive belt tensioner pulley. Make sure that all V-grooves make proper contact with pulleys. Make sure spring keeper releases or improper belt tension will occur.


    Pulley, Routing—Accessory Drive Belt 3.0L (2V)/3.0L (2V) FF Engine


    q3244d.gif


    Item Part Number Description 1 10300 Generator 2 6C348 Idler Pulley 3 3A674 Power Steering Pump 4 19703 A/C Compressor 5 6312 Crankshaft Pulley 6 6B209 Drive Belt Tensioner 7 8501 Water Pump 8 8620 Drive Belt

    Pulley, Routing—Accessory Drive Belt 3.0L (4V)


    q3735a.gif


    Item Part Number Description 1 3A674 Power Steering Pump 2 8501 Water Pump 3 19703 A/C Compressor 4 8620 Drive Belt 5 6312 Crankshaft Pulley 6 6B209 Drive Belt Tensioner 7 10300 Generator
3.4L SHO Engine
Removal
  1. Remove the right front wheel and tire assembly. For additional information, refer to Section 04-04.
  1. Remove the inner fender splash shield.
  1. Remove the alternator shield.
  1. ani_caut.gif WARNING: USE CAUTION WHEN REMOVING OR INSTALLING DRIVE BELT TO MAKE SURE WRENCH DOES NOT SLIP FROMDRIVE BELT TENSIONER OR POSSIBLE PERSONAL INJURY AND/OR DAMAGE TO DRIVE BELT TENSIONER AND DRIVE BELT MAY OCCUR.
    Using a 3/8 inch ratchet on the lifting lug, rotate drive belt tensioner counterclockwise (upward) and engage spring keeper. Remove drive belt from drive belt tensioner.
  1. Lower vehicle.
  1. Remove drive belt.
Installation
  1. Install drive belt over all pulleys (except drive belt tensioner ).
  1. Raise vehicle on hoist.
  1. Rotate drive belt tensioner , as described under Removal procedure and install drive belt over drive belt tensioner pulley. Make sure all V-grooves make proper contact with pulleys. Make sure the spring keeper is released or improper belt tension will occur.
  1. Install the alternator shield.
  1. Install the inner fender splash shield.
  1. Install the wheel and tire assembly. For additional information, refer to Section 04-04.


    Pulley Routing—Accessory Drive Belt, 3.4L SHO


    q3736a.gif


    Item Part Number Description 1 3A733 Power Steering Pump Pulley 2 6B217 (RH) Idler Pulley 3 19703 A/C Compressor 4 8620 Drive Belt 5 6312 Crankshaft Pulley 6 6B209 Drive Belt Tensioner 7 10346 Generator 8 6B217 (LH) Idler Pulley 9 6B217 (Center) Idler Pulley
Drive Belt, Water Pump
Removal
  1. NOTE: If removal of the water pump drive pulley is required, refer to Section 03-03.

    Rotate drive belt tensioner clockwise by hand and remove drive belt from drive belt tensioner .
  1. Remove drive belt from water pump drive pulley and water pump pulley.
Installation
  1. Position drive belt onto water pump drive pulley and water pump pulley.
  1. Rotate drive belt tensioner clockwise by hand and install drive belt over top of drive belt tensioner pulley. Make sure all V-grooves make proper contact with pulleys.


    Pulley Routing—Water Pump Drive Belt


    q3737a.gif


    Item Part Number Description 1 6B209 Drive Belt Tensioner 2 6A312 Crankshaft Pulley 3 8501 Water Pump 4 8620 Drive Belt

Jun 01, 2009 | 1997 Ford Taurus

1 Answer

Getting the serpentine belt back on


Replace the defective tensioner.

Mar 14, 2009 | 1999 Dodge Grand Caravan

1 Answer

I have a 91 pontiac 6000, I replaced the alternator and now I cant put the belt back on, I need a diagram of it


Hi,

you need a Belt Tensioner Serpentine Tool, to lift the Arm and replace the Belt,
disconnect negative Battery Cable, first!

connect Serpentine Belt, starting at bottom crankshaft, work belt, up the belt rotates toward, Radiator , so the Belt, goes under the Water Pump, and under the Belt Tensioner.



Dec 21, 2008 | 1991 Pontiac 6000

1 Answer

HELP! I cant find the tensioner on my 1996 buick lesabre serpentine belt


The belt tensioner is to the right below the alternator .

Oct 20, 2008 | 1996 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...