Question about 1990 Oldsmobile Toronado

1 Answer

Starter wont crank and display reads starter is disabled

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Sounds like your V.A.T.S. Vehicle Anti Theft System..... unlock your doors with the remote transmitter to disable it.

Posted on Apr 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

05 chevy equinox was running great all the sudden shut off and wont crank back. ive checked fuses now it wont even turn over. im at a loss


Is the battery good , cables and connections ? Do the headlamps turn on ? If so are they bright ? When you turn the key to on do the instrument cluster gauges move , warning light's come on then go off after 2-3 seconds ?Is the security light lit ? (anti-theft) Need more info !!!!!! Do you know how to do automotive electrical testing ? Find a electrical distribution diagram at http://www.bbbind.com/free_tsb.html Get yourself a DVOM - digital volt ohm meter and test for voltage , don't just look at fuse's . A fuse can be good ,but that doesn't mean a thing if there isn't B+ voltage there. Check out some videos on basic automotive electrical testing , how to read a wiring diagram . Also break down and buy a service repair manual . When you turn the key to start do you hear the starter solenoid click ?
Starter Solenoid Does Not Click diagnosis
Turn the ignition switch to the START position.
Is the security indicator On?
YES - Go to Security Indicator Always On or Flashing in Theft Deterrent
NO - Go to Step 3
3
Turn the ignition switch to the START position.
Does the starter solenoid click?
YES - Go to Starter Solenoid Clicks, Engine Does Not Crank
NO - Go to Step 4
4
With a scan tool, observe the Crank Request Signal parameter in the Engine Electrical powertrain control module (PCM) data list.
Turn the ignition to the START position.
Does the scan tool display that the Crank Request Signal parameter is Yes?
Go to Step 5
Go to Power Mode Mismatch in Computer/Integrating Systems
5
With a scan tool, observe the Starter Relay Command parameter in the PCM data list.
Turn the ignition switch to the START position.
Does the scan tool display that the Starter Relay Command parameter is ON?
Go to Step 7
Go to Step 6
6
Turn ON the ignition, with the engine OFF.
Verify that the transmission is in Park or Neutral.
With a scan tool, observe the TR Sw. parameter in the PCM data list.
Does the scan tool display Park or Neutral?
Go to Step 7
Go to Range Selector Displays Incorrect Range in Automatic Transaxle - AF33-5

Jan 28, 2017 | Cars & Trucks

1 Answer

Why wont my 2007 chevy uplander start or even turn over has starting disabled on the dash has new starter


So with new starter is engine cranking? Do you have spark? Do you have fuel delivery? Your problem lies with the components in these two systems.

Need to check them both out thoroughly to locate the culprit and remedy the situation.

Nov 23, 2015 | Cars & Trucks

1 Answer

Why wont my car start it died going down the road replaced starter?


If you put a volt meter on the battery and it reads 12 volts before you cranked the engine and it drops to 10 volts or less when you crank the engine, this indicates you have a bad cell in the battery and you should replace the battery because it is not holding the charge. The loud click sound coming from your starter is because you are not supplying enough voltage to energize it.

Aug 22, 2014 | 1998 Ford Taurus

1 Answer

Wont crank alarm set is on,on the dash


Is the key not disarming the alarm. Get an auto locksmith / autoelectrician to check and test. for faults. Do you have a spare key/ alarm remote control?

Jul 01, 2014 | Chrysler Aspen Cars & Trucks

1 Answer

Mitsubishi starter problems


when you say not clicking do you mean that it wont start? if so it could be your keyfob key. it has an immobilizer chip in it that will disable the car from actually starting when you try to crank it. it will sound like it is trying but it just wont start. id check the battery in the keyfob key for starters.

Jun 03, 2014 | 2009 Mitsubishi Galant

1 Answer

I have a 2003 dodge stratus and all the lights work but the car wont crank over. I BANGED ON THE STARTER ALSO JUST NO CTANK


Check fuses, look at engine compartment fuse box, finda ASD relay swap it with horn relay. Try starting in neutral with foot on brake pedal(neutral saftey switch maybe bad). Check power at starter big wire(Need 12v+) check small wire while someone cranks car for you, you need a 12v+ while cranking, then it will go dead while not cranking. Cycle key-fob lock unlock, manually lock unlock driver's door(anti-theft problem). Check for faulty after market alarm system. (disabling starter).

May 17, 2011 | 2003 Dodge Stratus

1 Answer

My tundra wont start but all the lights and radio


That might be a possibility. Asssuming when you say it wont start you mean it won't crank over. First check battery voltage at the battery with a dvm when you turn the key to the start position. Then check the voltage at the starter when you turn the key to the start position. If both readings are the same and you must have a reading of at least 12dcv. Try turning the ignition key to the on position( not the start) and jump the positive voltage from the starter to the solenoid terminal. The starter should crank over if the proper voltage is present.If the starter just clicks or just attemps to start. yes, you need to replace your starter

Mar 25, 2010 | 2000 Toyota Tundra

1 Answer

I have had problems with truck starting


When it wont crank, tap on the starter with a hammer, wrench ect. if it starts then, most likely need the starter replaced. If it grunts, its getting power. Make sure the battery is good. to check, take a voltage reading should be 12.7 volts on a fully charged battery, take a reading when starting, should not go below 10volts.

Sep 18, 2009 | 1995 Nissan King Cab

1 Answer

1994 buick park ave, wont crank over,


Pass key is the security system which disables the car if it is stolen. You need the remote or a key with a chip to start the car. go to a dealer, prove ownership with registration and they will be able to help you out

Sep 09, 2009 | 1995 Buick Regal

Not finding what you are looking for?
1990 Oldsmobile Toronado Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...