Question about 1999 Honda Accord

Open Question

I Have a P1167 fault code on my 1999 honda accord 2.3L LX. O2 sensor was changed to a bosh brand, Tested the primary O2 sensor for continuity; has batt voltage going to it; checked ohms (14.9) when disconnected engine heated; checked car fuses, look o.k.; using scan tool gives a .5volt for first min or two than gives a steady .775, unless I rev the rpm's to 3000 than it changes to .8 or .9; I read somewhere that the O2 should be of the OEM type. Please help!!!!

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: 1998 honda accord check engine light on code p0141

SECONDARY HEATED O2 SENSOR HEATER CIRCUIT FAULT SENSOR 2.

Posted on Jun 09, 2009

richard3707
  • 70 Answers

SOURCE: I have a 1999 Honda accord ulev 2.3 4 cylinders. I

You need to change the oxygen sensor.

Posted on Apr 17, 2010

daves944
  • 1050 Answers

SOURCE: bank 1 o2 sensor 1999

Bank 1 is at the back of the engine compartment next to the firewall. You'll need to know if you need to change (bank 1 sensor 1), or (bank1 sensor2). Sensor 1 is located in the exhaust system between the rear cylinder head and the catalytic converter. Sensor 2 is after the cat in the exhaust system after the cat.

Posted on Aug 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 Honda Accord sputters when idle


Both codes pertain to A/F ratio sensor 1.

Jan 09, 2014 | 2002 Honda Accord

1 Answer

Oxygen sensors on 2002 Honda CR-V


P1166 pertains to the upstream O2 sensor heater circuit. P1167 pertains to the upstream O2 sensor output.

Sep 24, 2008 | 2002 Honda CR-V

1 Answer

My check engine light came on. I found out the engine code is P1166 and P1167. Which oxygen sensor do I change, upstream or downstream, or both??


Start by changine the one closest to the engine. Probably in the exhaust manifold right in the engine bay. Recommend you buy OEM, as I've heard of people having issues with aftermarket sensors.
There's also a fuse for the heater circuit in the O2 sensors that could be blown, but I'd bet it's just a bad sensor.

Jan 09, 2014 | 2002 Honda Accord

1 Answer

Check engine light on


Check o2 heater fuse and relay 1st.

Jan 09, 2014 | 2002 Honda Accord

2 Answers

Bank 1 o2 sensor 1999 honda accord lx v6, i need the location to change it. i can not find it in the front of my car


Bank 1 is at the back of the engine compartment next to the firewall. You'll need to know if you need to change (bank 1 sensor 1), or (bank1 sensor2). Sensor 1 is located in the exhaust system between the rear cylinder head and the catalytic converter. Sensor 2 is after the cat in the exhaust system after the cat.

Aug 24, 2011 | Honda Accord Cars & Trucks

1 Answer

Check engine light is on took to auto zone they gave me a code that said P1166


Hello there:
P1167 and P1166 codes relate to the primary O2 sensor heater malfunction.
there are two different O2 sensors, a "universal" sensor from Autozone and a supposedly OEM sensor from O'Reilly's. Both of them may cause the car to throw a p1166 or P1167 code and run rough. so i highly recommend getting a O2 sensor from Honda, and this will fix the problem .
It turns out that none of the aftermarket probes from Bosch or Denso will work on a ULEV (F23A4) 4 cyl. engine. Honda had different part number probes for the normal VTEC 4 cyl. and the ULEV Vtec engine and the probes look different and have different length cables. The computers at O'Reilly's, Autozone, or NAPA made no distinction between these two engine types.

Dec 27, 2010 | 2003 Honda CR-V

1 Answer

Which o2 sensor do i change with a p0141 code fault. 97 honda accord


O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)

Jun 27, 2009 | 1997 Honda Accord

2 Answers

1998 honda accord check engine light on code p0141


SECONDARY HEATED O2 SENSOR HEATER CIRCUIT FAULT SENSOR 2.

Jun 09, 2009 | 1998 Honda Accord

1 Answer

What it means p1166 and p1167 on a mercury villager 99


p1166 and p1167 are Air/Fuel ratio code sensor codes (O2 sensor codes) heater circuit problem

Jun 02, 2009 | 1999 Mercury Villager

Not finding what you are looking for?
1999 Honda Accord Logo

Related Topics:

369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...