Question about 1998 Chevrolet Blazer

1 Answer

My car is ticking as if a turn signal is on. None of the lights are blinking but I get the noise. I think it may be the hazard switch. If you agree how do you replace a hazard switch? Any other suggestions?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

Well i dont agree with that it could be an vent valve for fresh air ..Do quote more about your vehical made type and problem....

Posted on May 21, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the emergency flasher relay located on 2013 Rogue?


Here is what the service manual says. Looks like it is not a flasher relay but a function of the body control module.

TURN SIGNAL AND HAZARD WARNING LAMP SYSTEMSystem Description OUTLINE Turn signal lamp and the hazard warning lamp is controlled by combination switch reading function and the flasher control function of BCM.
TURN SIGNAL LAMP OPERATION - BCM detects the combination switch condition by the combination switch reading function. - BCM supplies voltage to the right (left) turn signal lamp circuit when the ignition switch is turned ON and the turn signal switch is in the right (left) position. BCM blinks the turn signal lamp.
HAZARD WARNING LAMP OPERATION BCM supplies voltage to both turn signal lamp circuit when the hazard switch is turned ON. BCM blinks the hazard warning lamp.
TURN SIGNAL INDICATOR LAMP AND TURN SIGNAL SOUND OPERATION - BCM transmits the turn indicator signal to the combination meter with CAN communication while the turn signal lamp and the hazard warning lamp are operating. - Combination meter outputs the turn signal sound with the integrated buzzer while blinking the turn signal indicator lamp according to the turn indicator signal.
HIGH FLASHER OPERATION (FAIL-SAFE) - BCM detects the turn signal lamp circuit status by the terminal current value. - BCM increases the turn signal lamp blinking speed if the bulb or harness open is detected with the turn signal lamp operating. NOTE: The blinking speed is normal while operating the hazard warning lamp.

Oct 13, 2014 | 2013 Nissan Rogue

1 Answer

I have an 02 kia sportage. my signal lights come on but dont blink outside. no lights for the signal lights come on on the dash at all. also, no hazard lights.


If the 15A HAZARD fuse in the passenger compartment fuse box is OK, power is getting to the hazard function of the flasher unit. Pressing the hzard switch should cause the hazard lights to flash. HOWEVER, there is an electronic time and warning indication system module connected to to the hazard switch lead and that may be affecting things. If the 10A TURN fuse is OK, power is applied to the turn switch (with the engine in START or RUN) and you state you can select a right or left turn. HOWEVER, the RED/WHT and RED/BLU outputs from the flasher unit connect directly to the front and rear turn lamps and the instrument cluster turn indicators so you are not getting any flasher output. Again, that electronic time & warning indication system module could be affecting things

Oct 26, 2012 | Cars & Trucks

2 Answers

After using turn signal you can still hear clinking, is hazard relay part of turn signal


The hazard switch is also the device that supplies the turn signal "flash". If you continue to hear the noise of the turn signal flashing when the turn signals off than the problem is the turn signal switch. It is grounding The purple wire from the hazard switch which makes the hazard switch think the turn signal is on. The fix for this is to relace the turn signal/multi-function switch. Typically they will start to go bad in stages. Your symptom is the first stage. Eventually either the turn signals or the brake lights will also sto working. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 10, 2012 | 2000 Oldsmobile Alero

2 Answers

There is a ticking noise everytime my car is on that sounds like the turn signal noise but theres no pattern or order to the ticking. i thought the hazard switch was bad, what could the ticking noise be?


It could be a relay clicking under the dash due to a bad ground circuit somewhere in the vehicle. It would be best to have a professional put an ear to it.

Jan 16, 2011 | 2003 Pontiac Grand Am

2 Answers

Brake light/turn sigs dont work.But lights are on?


Ok, GM had a problem with their hazard light switches in the years of around 2001-2005. These caused some bizarre workings concerning the hazards, lights, turn signals, etc. The circuits overlap, and when the switch malfunctions, it makes for some odd happenings. Normally, when the hazards are on, they cancel out the brake lights and the turn signals, since they use the same circuits. The normal taillights use a different filament in the same bulb, which is why they light up brighter when you press the brakes. The aftermarket has come up with replacement switches in response to these inherent problems, so do not get your switch from GM. Places like RockAuto.com will sell these, though not necessarily this place, it's just the one I use. Usually, GM put these in the steering column, so replacement can be tricky for the average person, as it involves taking apart some of the steering column.

Feb 22, 2010 | 2004 Pontiac Grand Prix

1 Answer

1999 Nissan Altima GXE Turn signal problem


you have a busted bulb, your hazard may be working fine but the bulb is double contact so one part is working and the other is not. just check which bulb is busted.

Apr 20, 2009 | 1999 Nissan Altima

1 Answer

Turn signal clicker has a mind of its own


if you diconeect you will have no signals.
sometimes its the hazzrd swich sometimes its the signal light switch

Nov 21, 2008 | 2003 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...