Question about 1999 Audi A4

3 Answers

Cruise control does not work on 1999 audi a4 - 1999 Audi A4

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Go to AudiWorld forms and search for CC issues, there are very detailed testing procedures listed there. Common problems are:
-Control unit above glove box has broken solder joints
-Contacts on the stalk are corroded and need cleaning
-Vacuum leak at bellow, brake vent, clutch vent (or a loose hose)
-Bad pump (my pump vent valve wont stay closed and I am in the process of replacing it)

Posted on Nov 09, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 138 Answers

Can be a number of causes. brake pedal switch, clutch pedal switch [manual]. cruise control switch itself. wiring. fairly complicated circuit.

Posted on May 14, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Audi Master
  • 14,036 Answers

CHECK CRUISE CONTROL FUSE. IF FUSE GOOD PROBLEM IS IN THE SERVO MOTOR THE CRUISE CONTROL MODULE VACUUM PUMP AND CLUTCH VENT VALVE THE BRAKE VENT VALVE AND VACUUM SIGNAL AMPLIFIER.YOU HAVE TO TAKE CAR TO DEALERSHIP THEY HAVE EQUIPMENT TO FIX IT.

Posted on May 14, 2010

  • J Francis Dec 22, 2010

    I had a problem on my '98 A6 where the cruise control would work for about 5-10 minutes then stop. The dealer tried to tell me it was a diaphram that would not hold the vacuum. They replaced it ($350) and it still did not work. I took the car home and followed this post at Audi World and it now works great! The dealer wanted $664 to replace the module which is about a 10 minute job to get to behind the glove box (only 5 screws to take out!) If you are the least bit mechanical and have a solder gun, do it yourself and save big bucks!

    http://forums.audiworld.com/showthread.p...

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Benimur
  • 6966 Answers

SOURCE: audi a4 camb timming

Hi,

Audis are not very common in mycountry but from what I can gather:

Themark for the crankshaft gear is on the cover you have to remove inorder to get at the timing belt. The sprocket you may be having troublewith is the intermediate shaft (in front of the water pump) and I don'tbelieve that one matters at all since it doesn't drive any of the cams.The intake cams are driven by a chain off of the exhaust cam shaft soonly the exhaust cam is driven directly by the timing belt.

Additionally, you may benefit from the Audi A4 Service Manual and/or Audi A4 Cabriolet Workshop Manual.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Aug 30, 2008

dgjtex
  • 405 Answers

SOURCE: radio reset code for 1999 audi a4

Should be in your owners manual or in your glove box. If not the dealer will do this for your free of charge. And many honda for one has a place on their website to retrieve this info. It may require you pulling the radio to get the number on it so that they can retrieve this info. But I called a dealor for someone here last week and got them the code.

Posted on Dec 27, 2008

  • 190 Answers

SOURCE: 1999 audi a4 oil reset light

Turn off the ignition press and hold the button on the leftside of the display while turning the ignition on it should say service oil on the display pull out the button on the rightside of the display until the service oil clears

Posted on Jul 10, 2009

  • 60 Answers

SOURCE: 1999 Audi A4 A4 audi central locking not working

Open the drivers door with the key. Look on the door for the unlock button and press it. This will unlock all doors and the boot. Use the handle on the boot to open it.

Posted on Jan 30, 2010

emissionwiz
  • 75051 Answers

SOURCE: Location of 2003 audi a4 cruise control module?

PCM is the new name for the ECU so yes it is the ECU, PCM stands for "powertrain control module"

Posted on Mar 08, 2010

Testimonial: "great info"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are fuses 10, 11, and 27 for in audi a4 97.


10 is a vacant spot. 11 is for the cruise control (automatic transmission) and 27 is for the rear wiper. Below is a complete listing for you. I hope this helps you.....3_6_2012_2_50_27_am.jpg

3_6_2012_2_50_48_am.jpg

Mar 05, 2012 | 1997 Audi A4

1 Answer

My cruise control does not work on my 2006 Audi a4? Any ideas how to fix it?


cruise control is a vacuum system that holds the accelerator at a steady level if the vacuum is bad it wont work

Jan 10, 2011 | 2006 Audi A4

2 Answers

Location of 2003 audi a4 cruise control module?


PCM is the new name for the ECU so yes it is the ECU, PCM stands for "powertrain control module"

Mar 08, 2010 | 2003 Audi A4 Cabriolet

2 Answers

1999 AUDI A4 HAS VIBRATION AT CRUISE SPEED OF 50 TO 60 MPH.. NOTHING BELOW THESE SPEEDS OR ABOVE..


Could be a unbalanced tire..
Get the tires balanced..
Some tire purchases gauranty the balance..

Jul 08, 2009 | 1999 Audi A4

1 Answer

Can't locate where the cruise control module is on 2002 Audi S4.


After a certain model year, the module above the glovebox disappeared and the controls it contained were built into the car's computer. If your cruise in your S4 is failing, it's most likely the combination switch (the stalk on the column) - it fails on virtually every B5-chassis Audi at some point (I'm about to install my third one on my 99 A4). Get that part, install it, and you should be good to go.

Jan 01, 2009 | 2002 Audi S4

1 Answer

Air pump running when the key is off


its probally for your cruise control

Dec 31, 2008 | 1999 Audi A4

1 Answer

CRUISE CONTROL TOTALLY NOT WORKING


It could be a switch failure. The later Audis (including my 99 A4) are known for this, in the cars where the cruise is part of the turn signal stalk. 99% of the time the fix is replacement of the stalk.

Sep 25, 2008 | 1993 Audi 90

Not finding what you are looking for?
1999 Audi A4 Logo

1,318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14200 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...