Question about 2000 Hyundai Accent

1 Answer

Drain plug for the A/C on my 2000 Hyundai Accent

Where is the drain plug for the A/C on my 2000 Hyundai Accent? I think it might be clogged because there is a mildew smell coming from my vents.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Its a hose at the front of where the passengers feet area under the hood. Usually the problem is water holds and leaks on the floor. A repair shop may have a spray that they can coat the evaporator and kill the smell.

Posted on May 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is (radiator) drain valve located?


Many original equipment radiators do not have drain plugs any longer so you will need to remove the lower radiator hose to drain the coolant.

Mar 27, 2016 | 2005 Hyundai Accent

1 Answer

Why won't my 2000 hyundai accent GL shift into 4th gear? car has 127K miles and is reagularly maintained.


if u had it flushed-debris may hav entered the valve body ruining the trans------always just wnat to drain and fill------------or the overdrive may be worn-----fluid cud be low------a shift solenoid mite be stickn-----computer may be acting up-mite try unpluggn it then plug back in for reboot------------seek an honest specialist for a test drive and scan

Aug 08, 2014 | 2000 Hyundai Accent

1 Answer

Drain plug location for transmission on 2008 hyundai accent


If this is an automatic, there is no drainplug. You have to drop the entire tranny pan, but if you\'re careful when taking the bolts loose; you can drain the pan pretty easy.

Jan 27, 2013 | 2008 Hyundai Accent

1 Answer

I need to drain the gas out of the tank. Where would I find the plug?


there is no drain plug for gas tanks, only way is to drop the tank (carefully) and pull the pump assembly out then siphone it out with a siphon pump.

Jan 04, 2011 | 2000 Hyundai Accent

1 Answer

Where is the transmission pan on a 2001 accent


They do not have a regular trans. pan for sevice, but it has a drain plug underneath -- horizontally located facing the tire. It's pretty much in the centre of the transmission/axle.
Remove that to drain the fluid and it has a magnet in the drain plug -- clean that out before you put it back.

Mar 03, 2010 | 2001 Hyundai Accent

1 Answer

Just bought 2004 accent used. there is water in the headlights after driving it home. how do i fix this?


You could drill a small hole in the lowest spot of the lens to allow the water to drain and plug it with silicone after,most likely have to replace headlamp assembly.

Jul 28, 2009 | 2000 Hyundai Accent

1 Answer

How do i change manual transmission oil


you really need a engine hoist and a oil pump. There will be a 2 plug or bolts on the box. 1 for filling and 1 to drain. It is painful to do and worth getting a mechanic

Jul 02, 2009 | 2000 Hyundai Accent

1 Answer

Fred michelle


the computer may need to be re programmed because the computer isnt sensing that the rpms are as high as they are. you also may need to flush out the system with a drain in fill and i recommend to do it a few times they take regular atf 

Sep 11, 2008 | 2000 Hyundai Accent

2 Answers

How do you change the oil filter on a Hyundai Accent 1998/99?


Replace the oil filter after draining the old oil, and" BEFORE "adding new fresh oil, otherwise you'll be dump all that fresh oil, on the ground,while you "TRY to get the new filter installed.

Step 1 Remove drain plug,Drain oil into drain pan
Step 2 Remove oil filter
Step 3 Reinstall drain plug,qnce oil has drained.
Step 4 Fill new filter with oil,lube seal on filter.
Step 5 Install new filter, Add fresh oil to proper level.replace filler cap
Step 6 Run engine check for leaks.
Happy motoring!

May 23, 2008 | 1999 Hyundai Accent

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...