Question about 2000 Volkswagen Passat 4Motion
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Pull off door panel speaker and switches. lower the window to where you see the two or four 10millimeter that connect scissor mechanism to the window. Prop window all the way up and put a door stopper to prevent the window from falling down. Unbolt window motor, unplug window motor, and unbolt eveything else in the door. Pull it all down and out through the bottom largest whole, lay flat on ground the entire indoor mechanism, out where you can see it on the floor. Take a pic with camera, and proceed to swapping regulator, intallation is same as removal. Good Luck
Posted on Dec 29, 2008
SOURCE: how to reprogram airbag module
you must diagnose and repair the short
what year is your Golf and from what part of the world are you located?
Most of he time the suspect is the clock spring (called a spiral spring on the VW), behind the air bag...
looks a lot like this...
let me know if there is anything else I can do to help
Posted on May 31, 2010
SOURCE: skoda octavia 1.9 tdi
try the intercooler pipes next to the turbo i had an a4 tdi and that done the same thing lots and lots of smoke and very little power .cheap repair and won't take all your day off let me know if that helps
Posted on Oct 01, 2008
i do theses regulators all the time . its not hard to change the motor . you may need to drill out the rivits and replace them with bolts and nuts
Posted on Jun 10, 2009
I have no idea what a skoda octavia is, but I know brakes are brakes. You have 2 bolts holding the pads in a slide, the bolts have threads only at the top, the rest is the slide, pull those bolts, if that doesn't release the slide, take out the 2 bolts holding the caliper on there, pull the slide out the other way. replace the pads, make sure they go back in the way came out. Put the bolts back on, tighten them up, you should be all set. The pad thickness sensor is just a ground, when the wire hits metal, it turns on a light, It should go off when it is not touching anything. You should have squealers on there too, they give an audible screech telling you it is time for some new pads. Hope this helps.
Posted on Apr 26, 2010
Tips for a great answer:
Mar 03, 2015 | 2008 Skoda Octavia 1.9
on Feb 04, 2015 | Skoda Octavia Cars & Trucks
Sep 04, 2014 | 2002 Skoda Octavia
Dec 15, 2013 | 2006 Skoda Octavia 1.4
Oct 21, 2013 | Skoda Octavia Cars & Trucks
Jan 02, 2013 | 2008 Skoda Octavia 1.9
May 07, 2012 | 1996 Skoda Octavia
557 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: