Question about Cars & Trucks

1 Answer

How to replace lug nut studs 2002 chevrolet cavalier

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

Easiest way is to beat out the old ones with a big brass hammer and then install using the lug nut and washers

however, the official method requires a press

Posted on May 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i replace a broken front wheel stud of my aveo 2004


Performance Tool makes a lug nut remover socket set thats designed to remove stripped or damaged lug nuts and locking lug nuts that the key has been misplaced or lost
replace-broken-front-wheel-stud-aveo-te00gt2dlzesoljgluampwtr-3-0.jpg

Jun 01, 2015 | 2004 Chevrolet Aveo

1 Answer

How to replace broken lug stud on front wheel


You can either remove the bearing, or what I do is. On the front/top of the spindle, I grind away a little of the spindle. Just enough to get the lug out. You see where to grind. You can knock the lug out with a hammer, but can't get it out of the way without grinding. Reinsert the new lug. I use a bigger nut to go over the lug, then use a lug nut to seat it into place.

Aug 31, 2014 | 2002 Buick Century

1 Answer

Chevy camao


Not necessary to remove axles. Remove drum or rotor, hammer through the damaged stud, has room to fall out behind axle flange. Insert new stud through opening, A stud installer is preferred at this point, however, you can also use a couple of stacked washers and a lug nut. grease the washers, place them over the stud, grease the stud threads and then thread on the lug nut. With a socket wrench ,crank the stud down. The splines on the stud will bite in , keep turning until stud base meets axle flange. A new lug nut may be required , the one you use as an install tool may get damaged.

Jan 08, 2014 | 1998 Chevrolet Camaro

1 Answer

How to replace lug studs


You will need a special tool to press the lug studs in and out of the flange, or you can follow these directions;

First you will have to pound the broken lug stud(s) out of the wheel hub/flange, use a punch or a drift that is a little smaller in diameter than the lug stud, and be sure that you do not pound on the flange itself, then you will need a lug nut and about a half an inch thick of flat washers.

1. Insert the new lug stud through the wheel hub from behind so that the threaded end is facing out towards you and then put some grease on the threads.

2. Then slip the flat washers onto the lug stud followed by the lug nut, and run the lug nut down backwards with the flat end of the lug nut towards the flat washers to take up the slack and use plenty of grease on the threads.

3. Then using a breaker bar tighten the lug nut until it pulls the lug stud through the wheel hub and it is flush with the wheel hub.

Be sure that the amount of flat washers used will make up for any non-threaded part of the lug stud that might stick out past the wheel hub preventing the lug nut from pulling the lug stud all the way through the wheel hub, and basically you do not want the lug nut to run out of threads before it can pull the lug stud flush with the wheel hub.

Let me know if you require any further assistance.

Jul 31, 2010 | 1994 Honda Civic

1 Answer

How do I replace broken wheel studs on the Front Right wheel hub?


The studs will plainly hammer out. Hit the threaded part till it will wobble. A hole on the back side of the hub will be there to pull the broken stud out. Replace it with a new one and use the lug nut to tighten in in. Stacking washers will help very much doing this process. If none are available have the wheel installed to get the studs in tight

Jul 11, 2010 | 1998 Chevrolet Cavalier

1 Answer

How do i replace a lug stud?


They are simply pressed out. A hammer will pound these out easily for you. On the rear side of the hub there should be a hole large enough to remove and install a new one. Install the new one with the lug nut and a stack of washers to get a secure fit

Apr 15, 2010 | 2001 Chevrolet Cavalier

2 Answers

Broken lug nut how to replace lug nut studs


take off tire. remove old stud by hammering it out with a punch. put a socket behind axle plate so as not to break the plate. when replacing, just start stud from back by hand, then use a lug nut to pull it in tight. when tight replace tire!

Apr 14, 2010 | 1999 Oldsmobile Intrigue

3 Answers

How to replace lug nut studs 2002 chevrolet cavalier


take a hammer and a punch and pound it in, it will pop out the back of the hub assembly, then you get your new bolt, slide it through the back, same way the old one came out, throw a few washers on it and use the lug nut to draw it out till it catches, take the lug nut and washers back off, put the tire back on and use a little extra torque on that stud to insure it is all the way in place.

Good Luck!!

Mar 21, 2010 | Chevrolet Cavalier Cars & Trucks

1 Answer

Rear tire lug bolts


You have to remove the tire/wheel assy. remove the brake drum, you will see the spindle with the bolts there. punch out the broken bolts install new buy pushing thru the hole.Find some regular nuts that will fit over the stud, put your new nuts on and tighten up till flush in back.

Jun 07, 2009 | 2003 Chevrolet Cavalier

2 Answers

Broken wheel stud on 2003 Chevrolet Cavalier RF.


Remove the wheel and the brake rotor, so that you can get a hand behind the hub flange where the stud is seated. You'll feel the head of the stud back there.

Use a socket extension or something similar, place it against the broken face of the stud, and hammer it out. It'll fall out behind the hub flange, and you can grab it and remove it (if it doesn't fall to the ground). Insert the new stud (available at a parts store for less than $3) into the flange from behind, and press it as hard as you can to get it seated in the splines. Then stack washers onto the stud on the outside, where you can see it, and tighten a lug nut onto the stud. Use your tire iron to tighten the lug nut on the stud - this will pull the stud into place. You may have to stop once or twice to add more washers onto the stud, but keep doing this until you can't tighten it any further and the length of the exposed section of the stud is even with the others. Then reinstall your rotor and caliper, put the wheel back on (torque it with a torque wrench), and you're done.

Aug 08, 2008 | Chevrolet Cavalier Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...