Question about 2002 Pontiac Grand Am

1 Answer

2002 grand am....car starts then quits.....security light is on and service engine light also. I tried leaving the ignition switch on to reprogram the passlock the security light stills stays on. The car has a remote start also could this be the problem?

Posted by Anonymous on

  • Killer Bradshaw
    Killer Bradshaw Apr 18, 2015

    I don't want an add to buy something. I unhooked the battery for an hour with no luck

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 355 Answers

You can bypass the security system entirely. There is a great write-up here http://newrockies.ca. That was the only way to save my Park Avenue.

Posted on Jun 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not start. battery is ok.


Is your starter trying to start the engine? If so, there is a chance that the fuel pump stopped working. If the starter isn't trying to engage, then most likely your security system thinks that your key isn't the right one for your ignition switch. The solution for that would be to have your ignition switch replaced and reprogrammed (dealer item). I could go on and on, but without any more details it is hard to determine the root of your problem.

Jun 21, 2011 | 2002 Pontiac Grand Am

3 Answers

My 1999 cavalier z22 starts and stalls i changed gas filtre gas pump and still start and stall i beleive it to be my theft control sistem how do i disconect or reprogram


Quit messing around with a failed system. Just bypass it. Its cheaper too. And you never have to worry about it again. http://vatspasslockpasskeysecurityhelp.yolasite.com/

Apr 14, 2011 | 1999 Chevrolet Cavalier

1 Answer

2002 Deville--I started my car with my key #1, drove a short distance. Took that key out and husband tried to start car with key #2. Security system warning came on and car will not start. Is there an easy...


SWITCH IGNITION ON WITH MASTER KEY TO BE PROGRAMMED.TURN ON IGNITION KEY TO ON POSITION.SYSTEM LED SECURITY LIGHT WILL ILLUMINATE.LEAVE IGNITION KEY ON POSITION FOR 10 MINUTES UNTIL SECURITY THEFT LIGHT DISAPPEAR.THEN SWITCH OFF IGNITION SWITCH WAIT 5 SECONDS, THEN START THE ENGINE,THIS WILL HELP YOU FOR A WHILE BUT YOU NEED TO GET THE THEFT SECURITY SYSTEM SCANNED CHECK OUT AT THE GARAGE OR DEALERSHIP.

Apr 04, 2011 | 2002 Cadillac Deville

2 Answers

How do i reprogram lock key cylinder


turn ignition switch to the on position engine off for 10 minutes until security light or led light extinguish.then turn off ignition switch wait 5 seconds then start the engine.if this procedure dont work.the dealership has to reprogram it.

Jan 19, 2011 | 2002 Chevrolet Monte Carlo

1 Answer

Just wondering if you leave car door open or closed when trying to get security light to go off


YOU CAN TURN OFF SECURITY LIGHT BY PUTTING KEY IN THE IGNITION SWITCH.TURN IGNITION TO ON POSITION,WITH ENGINE OFF.LEAVE KEY IN THE SWITCH IN ON POSITION FOR 10 MINUTES UNTIL SECURITY LIGHT TURN OFF.IF IT DOES.TURN OFF IGNITION SWITCH.WAIT 5 SECONDS THEN TRY CRANKING CAR.IF THIS DONT WORK TRY ANOTHER KEY DO THE 10 MINUTES SWITCH TRICK.IF STILL THE SECURITY LIGHT DONT TURN OFF YOUR THEFT SECURITY SYSTEM IN FAULT THE DEALERSHIP HAS TO FIX AND REPROGRAM NEW KEY IN SWITCH OR BCM CONTROL MODULE..

Sep 13, 2010 | 1999 Oldsmobile Alero

1 Answer

Cranks has fuel pressure and spark, no start just replaced ign switek for no spark problem 04 olds alero 3.4L


TRY THIS PROCEDURE WITH IGNITION ON WITH KEY IN SWITCH.LEAVE SWITCH ON POSITION WITH ENGINE OFF. FOR TEN MINUTES WATCH THE SECURITY LIGHT IF IT TURNS OFF IN TEN MINUTES.TURN OFF IGNITION SWITCH FOR 5 SECONDS THEN TRY STARTING DO THIS PROCEDURE TWICE.IF CAR DONT CRANK THE DEALERSHIP HAS TO REPROGRAM NEW KEY AND IGNITION SWITCH.

May 12, 2010 | 2004 Oldsmobile Alero

1 Answer

Ignition switch does noting. racall issued ?


I have ran into this problem with a 01 grand am that has the same key switch as the alero.It turns ,but no response,all lights on dash worked just no starter.I had to reprogram it to work by leaving the key in the on position (before start)for ten minutes so the ecm can reprogram the switch.Hope this helps.

Feb 01, 2010 | 2002 Oldsmobile Alero

1 Answer

How do i reprogram the ignition after it has been changed on a 2002 grand prix?


  • disconect battery for 30 seconds, reconect.
  • try to start car, leaving key on for 10 minutes or untill security light stops blinking.
  • Turn key off

then try to start car. if this doesnt work repeat procedure.
Hope this helps

Nov 10, 2009 | 2000 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

281 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...