Question about 2001 Dodge Caravan

1 Answer

Headlights? both bulbs good,one headlight only or

Headlights? both bulbs goodone headlight only or opposite highbeam onlycant find module for it not under hood w/fuses?? can Switch be bad?

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 373 Answers

You have 1 high beam relay and a lo beam relay located under the hood. You also have 4 fuses under the hood, 2 are for high beam 10 amp and 2 for the low beam 1 is a 20 amp and the other is a 15 amp fuse. Remove the top off the fuse/relay power distribution center and look inside the top. It will tell you the location for each fuse and relay. hope this will help you.

Posted on May 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove the head light on a 2008 chevy Malibu


Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your Malibu at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side. In some Chevrolets, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Chevrolets have high intensity discharge headlights, sometimes referred to as xenon lights. These bulbs have a very high voltage that runs through them, even if the battery is disconnected. If your Malibu has this type of bulb, we do not recommend that you attempt to change it yourself.

When you change the headlight on your Malibu, it is important to not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb.

Hope this helps! :)

Feb 25, 2015 | 2008 Chevrolet Malibu

1 Answer

Headlights not working


check drl unit if not found integrated in fusebox check connections at battery and all fuses if ok if no test light is available take each fuse out 1 at a time and check if not burnt then you have relays for headlights and parking try the 4 way hazards to see if the parking lights function then if all is good play with the multifunction switch to see if not burnt

Jan 27, 2014 | Jeep Cars & Trucks

1 Answer

My headlights have quit working on my 1994 Chevy 1500 pickup. I replaced the headlight switch but they still don't work. The parking lights come on but not the headlights


Try checking both a; your fuses, and b; check your bulbs. You should have two fuse boxes, one under hood and one in or under the dash. Check those for bad, blown or weak fuses. And check your headlights bulbs for them being good and their connection. If this doesn't fix your problem, you may check out your highbeam switch.

Dec 31, 2011 | Cars & Trucks

1 Answer

Both low beam headlights are out bulbs have been recently replaced several times and driver side connection. They went out breifly a few months ago as we were driving and came back on in a few minutes


sounds like the switch assembly on the actually column ( what you use to turn the headlights on and off) may have went bad! and or the relay for the headlights. my money would be on the dimmer switch though considering the highbeam and lowbeam are 2 different circuits. thats if both the bulbs have been checked and found good as you say. good luck

Sep 09, 2011 | Chevrolet TrailBlazer Cars & Trucks

1 Answer

Low beam does not light up


If your highbeams work theres a strong possibility that BOTH your headlight bulbs the low beam filament is burned out, if the highbeams dont work either check all related wiring and fuses for the headlights also the headlight switch on your steering column....

Dec 07, 2010 | 2003 Ford Focus

1 Answer

Highbeam Headlights not working


try replacing the fuse because low beam and high beam are two different systems

Aug 07, 2008 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
2001 Dodge Caravan Logo

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...