Question about 1996 Chevrolet S-10 Pickup

Open Question

How to install a tach in s-10 2.2L 1996 - 1996 Chevrolet S-10 Pickup

Posted by on

  • Zaraki May 14, 2010

    Do you mean an aftermarket tach.?

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tachometer not working on my 95 Toyota pickup 4x4 jumping up and down


bad tach, seems .
bad tach, or bad wires to it or power to it bad.
i dont know what engine option you have
but most use the ignitor signal to do this.
later about 1996 the ECU uses CKP sensor to run the tach directly
in that case bad tach, bad wires to tach or bad power feed to it.
it only has 3 wires.
power
ground
sig
one is bad, or its bad.

Dec 14, 2014 | Toyota Cars & Trucks

1 Answer

Blowing transmission fuse on a 1996 chev 1500


Pinched wire between engine and trans due to mechanic fault during installation.

Dec 27, 2013 | 1996 Chevrolet K1500

1 Answer

1996 Outback Tachometer intermittent


If you have no other symptoms other than a faulty reading then it can be 2 things, leaking ignition high voltage wires or a faulty tach, i would go with the tach.

Aug 25, 2012 | 1996 Subaru Legacy

1 Answer

Tach & speedo not working


Had same problem with my 2000 dodge stratus 2.4 liter and transmission would not shift out of 1st gear. Solution was ignition fuse under the hood was blown, one side of fuse working, replaced 10 am fuse everything works, tach, speedometer, gas gauge and transmission started back to shifting.

May 27, 2010 | 1996 Oldsmobile Achieva

1 Answer

Is the cam sensor tied in with the tach,my car quit running going down the road and now it does'nt want start.Its cranking over but the tach is'nt moving 96 intrepid 3.5 engine.


crank sensor is tied in with the tach,try start and look at your tach gauge for movement if it move up and down crank sensor it's ok if not you have problem with crank sensor or electrical problem.

Jan 20, 2010 | 1996 Dodge Intrepid

1 Answer

TACH INOP 1996 SEBRING


resisters behind the cluster circuit board. the solder joints came loose. easy fix

Jun 04, 2009 | 1996 Chrysler Sebring

2 Answers

Install aftermarket tachometer


I'll take a stab at this, there's better than a 50-50 chance, and you can do no damage if the first try is wrong. Red is +12 volts and Black is chassis ground. that's a given. I would try Blue to coil pack "Tach" terminal, and Green for the dashlight. If I am right about the Blue and Green, a 9-volt battery from Green to Black will light the light if it's not burned out. If the Green doesn't light it, try the Blue, but my bets on the Green. If the Blue doesn't light it either, the bulb is toast.

May 08, 2009 | Ford Bronco Cars & Trucks

Not finding what you are looking for?
1996 Chevrolet S-10 Pickup Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...