Question about 2000 Jeep Grand Cherokee

1 Answer

2000 jeep gc laredo 4x4 4.7 auto The front end shakes

2000 jeep gc laredo 4x4 4.7 auto The front end shakes really bad but not all the time. Only if the roads are bad or not in good shape.. I have replace all bushes under the front, trac bar, stablizer (steering damper) new axle and wheel hub on drivers side.. The only thing i haven't replaced is the gear box but not sure if it will slove the probelm... I'm scared to drive it.

Posted by on

  • Julie Reynolds May 15, 2010

    i have put new tires on it they rotate them for me and make sure the tires are balanced.it doesnt shake al the time maybe 1-2 times a wk. thanks i will check the other stuff out thanks again

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

If it shakes over 50 miles per hour, it could be your front tires need balancing. and check your ball joints while you are at it. or king pins if it has that. (they are different from ball joints but serve the same purpose.)

Posted on May 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Code u0121 please how do i fix it


year 2000? not really huh?
seems the year is wrong,
so if that is true ,is car wrong too, JEEP and grand cherroke wrong too?
for example the 2011 Compass / Patroit
2011 (tsb to replace Pcm) ( have TSB, google finds it easy)
see?

1: get it serviced yet?
2: read the FSM WJ book yet, do all tests it tells you to do ?
there are only 2 paths.
they do it , you do it.?
which one?

WJ 00 (dead end, no code there, OP posted wrong year,. )

U codes are specific to specific jeeps. and years.
posting wrong car....
makes answers impossible. did you scan it yet?

but one thing, we do , is check fuses first.
if the ABS module does not talk, if in fact it is ABS code.
and scan it, first. too.
fuses then scan.
or fail.

these are factory codes, not usa federal codes like P-0300
so post full car spec, and engine, type for best answers.
lets say car is a 2005 GC.
and U0121
see chapter 8E-72 in fsm tells you what to do,
if car is 3rd gen jeep GC, then it has this buss.
the below is the buss, the can c bus
the code means PCM cant talk to the ABS box.
id be all over fuses. and resetting them all.


25781987-qpmzfpq4bzczyesa3jswsd23-1-0.jpg

Jul 13, 2015 | 2000 Jeep Grand Cherokee Laredo

1 Answer

1998 Jeep Grand Cherokee Laredo 4WD with loose steering


Did you tell the shop to do this or did they find something wrong with those parts? "wheel bushings" ??? Are you talking about hub bearings or ball joints? Bad ball joints can give you wandering or a really bad shake (called death wobble). Has anyone checked the steering box to be sure it hasn't started to tear off the chassis? Is it internally worn? There are too many parts up there that can make a noise for me to comment intelligently about that. If there, I'd need to test drive it. Check the steering damper (sideways shock that attaches to the steering linkage. that can allow wander over bumps. Also, adding alignment caster (more than factory setting) will tend to stabilize the front end. I run way more than factory setting on all of mine. It can wear the steering pump, but it only takes about a year off it's normal life if even that much.
So, you may get nine years from it instead of ten.
I hope at least one item I've mentioned helps you. If you don't understand any part of this or have a question, just ask!!

Jun 25, 2010 | Jeep Grand Cherokee Cars & Trucks

1 Answer

How to replace in-tank fuel pump 2000 GC laredo 4.0 v6.


Pull the carpet up in the back of the the jeep to see if there is a access panel to the fuel pump. If not you have to drop the tank.

Mar 11, 2010 | 2000 Jeep Grand Cherokee

2 Answers

Wheels shake terribly on 95 jeep laredo when I hit a bump over 50


Get front end checked out a.s.a.p. as this could be a part ready to go, and steering could go with it. Steering link, tie rod end, idler arm all come to mind. Personally I wouldn't drive it too far if at all, and not at a high speed until I'm sure what it is.

Jul 31, 2009 | 1995 Jeep Grand Cherokee

2 Answers

97' jeep cherokee laredo shakes when driving


Could be a number of things from ball joints to your pitman arm(arm that steers the tires). It dont sound like tire are way out of balance because yu said it only starts when you hit a bump. If it was me, Id crawl under the front end and start shaking different parts until I figured out what was loose. if its shaking that bad you should definitly be able to tell when you shake it.

Jun 23, 2009 | 1997 Jeep Grand Cherokee

1 Answer

2002 Jeep GC Laredo: Starts up then stalls within seconds


Does the vehicle crank for extended period of time upon first starting? If so the fuel pump needs replacing.

Apr 15, 2009 | 2002 Jeep Grand Cherokee

1 Answer

OIl leak in 2001 Grand Cherokee Laredo


valve cover gasket is like $20 and a do it yourself job, just buy a manual like a chiltons from an auto parts store. if it was valve cover, the smoke would be coming from engine, not tailpipe.

rear seal is in between engine and tranny, this would cause oil to leak on ground, but not to burn

if smoke is coming from tailpipe, your piston rings might be going bad. that is an expensive repair, but switching to synthetic oil may give you several more years of life out of the piston rings, synthetic oil has a way of soaking into bad piston rings and temporarily making them like new again, unless they are already too far gone.

Nov 24, 2008 | 2000 Jeep Grand Cherokee

3 Answers

Break lights jeep grand cherokee laredo 2000


check the grund circuit....if it is weak this can happen

Nov 14, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

481 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...