Question about 1998 Ford F150 Regular Cab
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The firing order for the 5.4L engine is 1-3-7-2-6-5-4-8.
Here is a link that shows a diagram.
Posted on May 10, 2009
DTC code p0174 means "System too lean (Bank 1)"
Basically this means that an oxygen sensor in bank 2 detected a lean condition (too much oxygen in the exahust). On V6/V8/V10 engines
, Bank 2 is generally the side of the engine that doesn't have cylinder #1.
Posted on Jan 09, 2010
SOURCE: My 1998 ford winstar is
Check for a small hole in the right angle rubber hoses between the PCV valve and the motor. A hold in the hoses will give a false alarm indicating "lean bank1" and "lean bank2" on Fords and Lincolns and once you replace those faulty hoses or at least tape them up you can reset the codes at the parts store and it should not come back until you have holes in the hoses again. you can also keep driving the car and after numerous "successful trips" with no more codes, the engine light will eventually go off if you have corrected the problem.
Posted on Aug 03, 2010
p0171 and p0174 are common issues the most of the time it is a vacuum leak check all vacuum lines have seen the vacuum line on the back of the air horn bad several times.
Posted on Sep 26, 2010
Tips for a great answer:
Aug 22, 2014 | 2010 Ford F-150
Nov 21, 2010 | 2006 Ford F-150
Sep 26, 2010 | 1998 Ford F150 Regular Cab
Feb 10, 2010 | 1999 Ford Ranger SuperCab
Jan 09, 2010 | 1999 Ford Windstar
Sep 23, 2009 | 1998 Ford F150 Regular Cab
Aug 03, 2009 | 1998 Ford F150 Regular Cab
184 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: