Question about 2006 Dodge Grand Caravan

1 Answer

Engine light on faults p 456 p522 - 2006 Dodge Grand Caravan

Posted by on

  • yadayada
    yadayada May 13, 2010

    these are not valid codes, there are 4 numbers not 3

  • kkerr1661 May 13, 2010

    Sorry p0456, p0522

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

P0456 is Evap Emission control small leak detected.
P0522 Engine oil pressure sensor low voltage.
The first code could be related to a loose, defective, or missing gas cap.
The second code, could be a defective sensor but you will need to confirm. Check oil level and condition first then onto the sensor and related wiring.

Posted on May 13, 2010

Testimonial: "Thank Yoou very much for the quick response This helps save me time to check the vehicle. As a heavy equipment mechanic I daily give advice over the phone to customers for cranes 100 to 3600 ton cap, so when Iget home and have to deal with my personal vehicles I usually have to spend high amounts for my local mech tojust scan my vehicle. I don't mind giving him the 1000s to repair my vehicle but if the problem is simple I would rather fix it myself and not leave my wife without a vehicle for days. Thanks again Kris Kerr Field Service Technician\Manager Cropac Equipment"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the firing order of 2007 Jaguar S Type 3.0 v6 engine?


142536 rh bank as you look from rear of engine ie: drivers seat rh cylinders 123 lh 456 jaguar changed cyljnder numbering about mid 2000s which confused things a little before it was 135 246 the ecm still recorded misfires etc with cyl numbers.but at the time was not easy to decide which cylinder was at fault and looking to replace plugs or on plug coils some techs got it wrong and with the coils not cheap we had to be carefull so no1 is the rh bank at front on all cheers.

Nov 12, 2016 | Jaguar Cars & Trucks

1 Answer

Dodge ram gas cap light and check engine light on at the same time p0456 and p0457


456 is a small evap leak check hoses to evap canister by fuel tank.

Oct 10, 2014 | Dodge Ram 1500 Cars & Trucks

1 Answer

Engine light on in 2005 jeep liberty, code p0456


Code 456 is a common code for a small leak in the evap system. The evap system is how the computer vents gas fumes from the gas tank.
The problem could be a faulty gas cap, the cap left off with the engine running, or something else.

Sep 05, 2014 | Cars & Trucks

1 Answer

Im getting a fault code p0456


Code 456 means the computer has found a small leak in the EVAP system. The computer vents the gas tank to the vapor canister several times while the engine is running. The system has to be sealed to work properly.
Someone would need to test the venting system for leaks. It could be the gas cap or a valve or hose.

Feb 26, 2013 | 2002 Volkswagen Jetta TDI

1 Answer

Trouble shooting a 456 code on a 2002 subaru legacy


Evaporative emission control system malfunction
Usually this P0456 code is caused by an incorrect or faulty gas cap. Filling the fuel tank with the engine running could conceivable cause this code as well or if the cap wasn't properly tightened. Any of the following could also be the cause:
  • A small leak in any of the EVAP hoses or fuel tank hoses
  • A small leak in the purge valve or vent valve
  • The EVAP Canister may be leaking

Oct 17, 2012 | Cars & Trucks

1 Answer

Check engine light on and cruise control light is flashing


cruise light flashing, no cruise engine light on. spent $80 for diagnoses of PO 456 but not able to fix it. No dealer within 100 miles. Not good.
Must fix myself or autozone can do it. maybe.

Dec 16, 2011 | 2006 Subaru Forester

1 Answer

I am getting a code p522 and a p340 on my 2006 dodge caravan. i replaced the camposition sensor but i am still getting both codes. anything that i could try. thank you.


CODE P0522 - ENGINE OIL PRESSURE SENSOR RATIONALITY. CODE PO340 - NO CAMSHAFT POSITION SENSOR CIRCUIT FAILURE. REPLACE OIL PRESSURE SENSOR.YOU NEED A CODE SCAN TO ERASE CODES. IF THESE CODES POP UP AGAIN. YOU COULD HAVE PCM PROBLEMS.CMP SENSOR NOT RECEIVING 5 VOLT SUPPLY.

Aug 13, 2011 | 2005 Dodge Caravan

1 Answer

What is the code 456 in mitsubishi eclipse 2007 gs


P0456? very small evap leak, for a 2007 was there a fuel pump recently done? if not replace the gas cap, why would I say this , In smog test yes I am the ***** that keeps people from passing the smog test even if they get a three month notice and they bring it in to me on the due date. And it fails ,Replace the cap. reset the light with a scan tool or do this 40 good ignition start up, with no fault occuring. or 2 trip with no fault occurring. there the light will reset.

Apr 29, 2011 | Mitsubishi Eclipse Cars & Trucks

1 Answer

Engine light came on, car is hard to start. Just downloaded the codes and it shows 404 and 456. What part do I need to replace?


404 is an EGR code
and 456 is gas leak

So probably tighten gas cap or replace gas cap for code 456 then for code 404 clean carbon deposits from EGR valve or replace it then e mail me for a certain test that has to be done at sj196653@yahoo.com thanks

Feb 13, 2010 | 2007 Honda Pilot

1 Answer

03 JGC losses power engine light blinks


I would start with a test drive with a fuel pressure gauge on it make sure you have spec. 35 - 40 psi. Clear codes and record all the freeze frame data in obd2 as you will need this in the diag process. 442 and 456 are evap codes I believe, do they return with the 300 misfire codes? Either way you need to reproduce the problem with the gauge on it and get the first code it sets. Could be fuel pump/filter/sending unit assy. In this case you will need to pay attention to the fuel level when this occurs. (same level as before)

Nov 24, 2008 | 2003 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Dodge Grand Caravan Logo

844 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...